Vonets VAP11G-300 Manuale utente
VONETS
1
VONETS Series Product Manual
Declaration
Copyright © 2016 Shenzhen HouTian Network Communication Technology Co.Ltd
All rights reserved, with retained ownership
Without Shenzhen HouTian Network Communication Technology Co.Ltd written authorization, any
company or personal can’t copy, writer or translation part or all contents. Can’t do commodity
distribution for any commercial or profitable purposes by any ways(electricity, mechanical,
photoprint, record or other methods).
VONETS is the registered trademark of Shenzhen HouTian Network Communication Technology
Co.Ltd. The other all trademarks or registered trademarks mentioned in this documents are belong
to the individual owners. The product specifications and information technology mentioned in this
manual are just for reference, if any updates, without other notice. Except for special agreements,
this manual is just for user guidance, any statements, information and so on in this manual can’t
constitute the warranty of any forms.
Form 1
Class A: Professional WiFi Repeater + bridge Series Product
Model
Power Supply
Parameters
Point to point
Transmission
distance
Transmission
Rate（Mbps）
Frequency
VAP11G-300
DC5V-15V/500mA
80m--100m
300
2.4G
VAP11N-300
DC5V-15V/500mA
50m--80m
300
2.4G
MINI300
DC5V/500mA
50m--80m
300
2.4G
VRP300
AC110V-240V
50m--80m
300
2.4G
VRP300 PLUS
AC110V-240V
50m--80m
300
2.4G
VRP5G (Dual Band)
AC110V-240V
50m--80m
300+450
2.4G/5G
VAP11G-500 (High
power)
DC5.5V--15V/2A
300m--500m
300
2.4G
VAP11G-1000(High
power)
DC5.5V--15V/2A
800m-1000m
300
2.4G
VAP11G-2000(High
power)
DC5.5V--15V/3A
1500m--2000m
300
2.4G
Class B: WiFi Router + Repeater + Bridge Series Product
VAR11N-300
DC5V/500mA
50m--80m
300
2.4G
VONETS
2
VHA300(Module)
DC5V-15V/500mA
50m--80m
300
2.4G
WIFI-ROOM
AC110V/240V
50m--80m
300
2.4G
VAR5G (POE power
supply)
DC5V/3A or POE
500m--800m
300+450
2.4G/5G
VM300(Module)
DC5V-15V/500mA
80m--100m
300
2.4G
Class C: Professional Portable Router
VAR11N -PLUS (Router)
DC5V/500mA
50m--80m
300
2.4G
VONETS
3
VONETS Product Application
1．WiFi Repeater+bridge: It is mainly used for WiFi signal transfer connection and regional
coverage, so as to achieve the family, office, public wireless network operation.
2. Router Mode: It is used as WiFi Router, connect to Internet by Modem or Broadband access line.
VONETS Class A: (WiFi Repeater + bridge) Series Product Setting Guide
VONETS
4
Step1. Connect -- There are two methods to connect when configured.
Method 1. -- Connect WiFi bridge LAN port to PC by Ethernet cable, see the 2 drawing below:
Method 2. -- WiFi connect to bridge by PC or smart phone, see the 2 drawing below:
VONETS
5
Step 2. Power on the device (Please refer to the supply parameters of <VONETS wireless products
table to power,this series product does not contain the power adapter from original factory,users
need to buy power adapter according to supply parameters)
Step 3. Connect to WiFi bridge hot spot by smart phone or PC (This step is fit for <Step 1.
Method 2>)
WiFi hot spot parameters of VONETS series bridge as below:
WiFi SSID: VONETS_******
WiFi password: 12345678
Step 4. Log in WEB configured page, configure the parameters of source WiFi hot spot
1) Open browser (IE, Google Chrome, Safari, the mobile phone browser and so on), enter IP
address (192.168.254.254) or configured domain name of configured page
(http://vonets.cfg);
2) Enter user name and password (it is admin) on the log in page, click “Login” button to enter
configured page;
3) Search the source WiFi hot spot
VONETS
6
4) Set up the source WiFi hot spot password, extended WiFi hot spot SSID (the default
configuration: The password of extended WiFi hot spot is the same as the source WiFi hot spot
password)
5) Configure WiFi Transmit power (This is just fit for VAP11G-500, VAP11G-1000, VAP11G-2000)
The default is Normal WiFi power, at this point the point to point transmission distance
can not reach the farthest remote;
If you want to reach the farthest transmission distance, this product must be paired to
use, the device is configured to high power mode, please the drawing below:
VONETS
7
6) After rebooting the device, the device will automatically connect to the configured
WiFi hot spot, if it is configured successfully, the green indicator will flash quickly.
Note 1: When bridge/repeater product connect to external network, the IP address of the device
will change. At this time, when log in configured page, we suggest you enter configured
domain name: http://vonets.cfg. Or in Windows command window, enter the command:
ping vonets.cfg, to get the IP address of the device, then log in configuration page with
this IP.
VONETS
8
VONETS Class B, C: (WiFi Router + Repeater + bridge) Series Product
Setting Guide
Step1. Connect -- There are two methods to connect when configured.
Method 1. -- Connect the device LAN port to PC by Ethernet cable, see the 2 drawing below:
Method 2. -- WiFi connect to router by PC or smart phone, see the 2 drawing below:
VONETS
9
Step 2. Power on the device (Please refer to the supply parameters of <VONETS wireless products
table to power,this series product does not contain the power adapter from original factory,users
need to buy power adapter according to supply parameters)
Step 3. Connect to WiFi bridge hot spot by smart phone or PC (This step is fit for <Step 1.
Method 2>)
WiFi hot spot parameters of VONETS series bridge as below:
WiFi SSID: VONETS_******
WiFi password: 12345678
Step 4. Log in WEB configured page, configure the parameters of source WiFi hot spot
1) Open browser (IE, Google Chrome, Safari, the mobile phone browser and so on), enter IP
address (192.168.253.254) or configured domain name of configured page
(http://vonets.cfg);
2) Enter user name and password (it is admin) on the log in page, click “Login” button to
enter configured page;
VONETS
10
3) Set the Internet parameters, for WAN settings, there are two common connection
methods: DHCP and PPPOE;
The default setting is DHCP;
If it is PPPOE connection, please refer the drawing below, enter the account and
password provided by ISP;
4) WiFi Settings
In “Basic Settings”, user can disable WiFi Network, revise WiFi Repeater (SSID) and
change WiFi channel;
In “WiFi Security”, user can revise WiFi security mode and pass phrase;
Altri manuali per VAP11G-300
3
Questo manuale è adatto per i seguenti modelli
14
Altri manuali Vonets Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
