Vortech MAXFLOW FPB Manuale utente

DP/N: 007135v1.0 02/22/2018

MAXFLOW®FUEL PUMP BOOSTER

Installation Instructions

1650 Pacific Avenue, Channel Islands, CA 93033-9901 • Phone (805) 247-0226

Fax: (805) 247-0669 • www.vortechsuperchargers.com • M-F 7:00 AM - 3:30 PM (PST)

ENGINEERING, INC.

2011-2014 MUSTANG GT

P/N: 5A102-037

* Legal in California only for racing vehicles which may never be used or registered or licensed for use upon a highway.

DP/N: 007135v1.0, 2018-02-22

FOREWORD

Take note of the following before proceeding:

1. Proper installation of this accessory requires general automotive

mechanic knowledge and experience. Please browse through each step

of this instruction manual prior to beginning the installation to determine if

you should refer the job to a professional installer/technician. Please con-

tact your dealer or Vortech Engineering for possible installers in your

area.

2. This product was designed for use on stock (un-modified, OEM)

vehicles. The PCM (computer), engine, transmission, drive axle

ratios and tire O.D. must be stock. If the vehicle or engine has been mod-

ified in any way, check with Vortech prior to installation and use of this product.

3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).

4. Always listen for any sign of detonatlion (knocking/pinging) and discontinue hard

use (no boost) until the problem is resolved.

5. Vortech is not responsible for any clutch, transmission, drive-line or engine dam-

age.

Exclusions from Vortech warranty coverage considerations

include, but not limited to:

1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.

2. Continued operation with an impaired vehicle or sub-system.

3. The combined use of Vortech components with other modifications such as, but

not limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party

PCM programming or other such changes.

another language in any form, by any means without written permission of Vortech Engineering, Inc.

All information, illustrations and specifications contained herein are based on the latest

product information available at the time of this publication. Changes to the manual may be

made at any time without notice. Contact Vortech Engineering for any additional informa-

tion regarding this kit and any of these modifications at (805) 247-0226 7:00am-3:30pm

PST.

STOP

DP/N: 007135v1.0, 2018-02-22

iii

TABLE OF CONTENTS

FOREWORD ...................................................ii

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

TOOL & SUPPLY REQUIREMENTS .................................iv

PARTS LIST ................................................... v

1. PREPARATION AND REMOVAL ...........................................1

2. FUEL PUMP BOOSTER INSTALLATION .....................................5

3. INTERIOR RE-ASSEMBLY................................................7

4. FINAL CHECK..........................................................9

DP/N: 007135v1.0, 2018-02-22

VORTECH FUEL PUMP BOOSTER

Installation Instructions

2011-2014 MUSTANG GT

Before beginning this installation,

please read through this entire instruction booklet

The Vortech 2011-2014 Mustang GT Fuel Pump Booster (FPB) upgrade was designed

specifically for use on 2011-2014 Ford Mustang GT vehicles equipped with a turbocharg-

er, supercharger or nitrous oxide, to support applications with increased horsepower

over the basic kit. As with any power enhancing product, this unit is intended for use on

healthy, well-maintained engines. Vortech Engineering is not responsible for engine

damage. Installation on new vehicles will not harm or adversely affect the break-in peri-

od so long as factory break-in procedures are followed.

For best performance and continued durability, please take a note of the following key

points:

1. Use only premium grade fuel 91 octane or higher (R+M/2).

2. Always listen for any sign of detonation (pinging) and discontinue hard use (no

boost) until problem is resolved.

TOOL & SUPPLY REQUIREMENTS:

• Interior Panel Removal Tools

• Drill Motor

• 1/8" Drill Bit

• Screw Driver Set

• Electrical Tape

DP/N: 007135v1.0, 2018-02-22

PARTS LIST

2011-2014 MUSTANG GT

FUEL PUMP BOOSTER UPGRADE

Part No. 5A102-037

PART NO. DESCRIPTION QTY

007136 INSTR, ’11-’14 MUST GT, PNP FPVB UPGRD 1

008601 BOX, CARDBOARD, PUMP BOOSTER 1

008602 INSERT, CARDBOARD, PUMP BOOSTER 1

5A002-071 VOLT BOOSTER, PNP, STD, VORT LOGO 1

5W001-099 HARNESS, FPVB, PNP, ’11-’14 MUST GT 1

7E010-048 #10 X 3/4 SHEET METAL PHILLIPS 4

7U100-055 TIE WRAP, 7.5" NYLON 5

IMPORTANT: Before beginning installation, verify that all parts are included in the kit.

Report any shortages or damaged parts immediately.

DP/N: 007135v1.0, 2018-02-22

This page was left intentionally blank.

DP/N: 007135v1.0, 2018-02-22

1. PREPARATION AND REMOVAL

Fig. 1-a: Open Trunk

A. Prior to unplugging the battery, you will need to

open the trunk. Be sure not to close the trunk

until you have completed the last step in this

instruction manual.

(See Fig. 1-a)

B. Unplug the negative battery terminal lead & set

aside, making sure it doesn't come into contact

with the negative battery terminal throughout

the duration of the installaiton.

(See Fig. 1-b)

C. Remove the rear trunk carpeting, exposing the

spare tire well. Remove the spare tire, if

equipped.

(See Fig. 1-c)

Fig. 1-b: Unplug Negative Battery Lead

Fig. 1-c: Remove Trunk Components

DP/N: 007135v1.0, 2018-02-22

1. PREPARATION AND REMOVAL, cont'd

D. Remove the four plastic fasteners securing the

plastic tail light cover. Lift up on the panel &

set it aside. Be sure to unplug the light from

the plastic tail light cover.

(See Fig. 1-d)

Fig. 1-d: Remove Scuff Panel

DP/N: 007135v1.0, 2018-02-22

A. Located on the driver side of the spare tire well

is the OEM fuel pump driver module. Locate

the provided fuel pump booster adapter har-

ness & install it in-line between the OEM fuel

pump driver module & main vehicle harness.

(See Fig. 2-a)

B. Using 2x of the provided zip ties, secure the

fuel pump booster harness to the existing OEM

harness that runs along the body of the vehicle

(usually covered by the plastic tail light cover).

(See Fig. 2-b)

Fig. 2-a: Install Fuel Pump Booster Adapter

Harness

Fig. 2-b: Secure Fuel Pump Booster Harness

C. Place the fuel pump booster in the passenger

side rear portion of the spare tire well. If the

vehicle is equipped with a spare tire, confirm

that the spare tire will fit back into its original

location. Using the fuel pump booster as a tem-

plate, mark the four mounting locations. Using

a drill motor & 1/8" drill bit, drill the 4x mounting

holes.

(See Fig. 2-c)

Fig. 2-c: Drill Mounting Holes

2. FUEL PUMP BOOSTER INSTALLATION

DRILL 4X HOLES

USING 1/8" DRILL BIT

NOTE: Since the walls of the spare tire well

are not flat, it may be able to only drill

3x mounting holes.

DP/N: 007135v1.0, 2018-02-22

E. There are 2x existing ground straps on the

body of the vehicle. Locate the ground strap

for the fuel pump booster & attach it to the

OEM ground strap as shown. Secure using the

existing 10mm-headed screw.

(See Fig. 2-e)

D. With the wires on the FPB facing downwards,

install the FPB to the vehicle using the provid-

ed mounting screws.

(See Fig. 2-d)

Fig. 2-d: Mount Fuel Pump Booster

Fig. 2-e: Attach Fuel Pump Booster Ground

Strap

F. The brown wire on this fuel pump booster will

not be used. Tape the open end shut. It will be

secured to the harness in a later step.

(See Fig. 2-f)

Fig. 2-f: Brown Wire

(Unused)

2. FUEL PUMP BOOSTER INSTALLATION

NOTE: Since the walls of the spare tire well

are not flat, it may be necessary to

only use 3x of the provided mounting

screws.

Indice

Altri manuali Vortech Estensione

Vortech

Vortech MAXFLOW 5A102-036 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente