Vortex Kisai Manuale utente
Change the way you think about time
INSTRUCTION MANUAL
Button A
Button D
Button B
Button C
touch sensitive screen
• This watch uses an LCD “always on” display to show the time.
• Hours are displayed in the same position as hours on a clock.
• The outer ring of large blocks represents hours.
• The position of the gap in the ring shows the current hour.
• The inner ring of small dots represents minutes.
• Small blocks in the outer ring show seconds.
Hours and AM/PM
(time 1)
Seconds
Minutes
(time 1)
PM indicator
(time 1)
09:31
Example 1: Hours and Minutes
AM indicator
(time 1)
1. How to read the time
• This watch has a second time zone (time 2).
• Hours are displayed in the same position as hours on a clock.
• The inner ring of large blocks represents hours.
• The position of the gap in the ring shows the current hour.
• The inner ring of small blocks represents minutes.
Hours and AM/PM
(time 2)
Minutes
(time 2)
Other indicators
AM indicator
(time 2)
Screen Locked
Alarm on
Date
Time 2 Setting
Setting
Time 1 Setting
Alarm
02:52:00 PM (time 2: 8:21:00 AM) 05:07:51 PM (time 2: 05:07:51 PM)
Example 3:Example 2:
PM indicator
(time 2)
• You can operate the LED
backlight and turn the alarm on
or off when the display is locked
but for all other functions you
need to unlock the display.
• To unlock the display slide
your finger from button D to
button B. (The screen lock
indicator will disappear.)
• The display will automatically
lock after 60 seconds.
• To turn the backlight on, touch button D.
• The backlight will illuminate the display for
7 seconds.
Note: In setting mode you cannot operate the LED
backlight.
• Unlock the screen.
• To turn the display sound on or off, hold
button D for 3 seconds.
Note: Turning the display sound off doesn’t affect
the alarm sound.
II. Turning on the backlight
III. Turning the display sound on or off
I. Unlocking the display
2. Operating the basic functions
touch Button D
hold Button D
Screen lock
indicator
Button D Button B
• Unlock the screen (see “operating the basic functions”).
• Touch button A once (the date indicator will appear on
the screen).
• The year is displayed in the same position as the seconds.
• When no segments are on it shows the year 2000. Each
segment indicates one year.
• The month is displayed in the same position as hours (time 1).
• The position of the gap in the ring shows the current month.
Years
ex: 2011
ex: 23rd
ex: July
Months Days
3. How to read the date
Button A
Date
Indicator
ex: July 23rd 2011
• The date is displayed in the same position as minutes (time 1).
• Unlock the screen (see “operating the basic functions”).
• Touch button C to display the alarm time (the alarm indicator
will appear on the screen).
• The alarm time is displayed in the same way as time 1.
• The alarm on indicator will be displayed when the alarm is on
and will not be displayed when the alarm is off.
• AM/PM indicators are the same as time 1.
• When the alarm sounds, you can turn it of by touching
any button.
Alarm on
Hours Minutes
4. How to check the alarm time
Alarm On 07:30 AM
Example:
Button C
ex: Alarm Time 6:30 AM Alarm On
Alarm indicator
Alarm on indicator
Increase the Hour Decrease the Hour
• To make time setting easier, it is recommended that
you turn the display sound on. (see “operating the basic
functions”).
• Unlock the screen (see “operating the basic functions”).
• Hold button B for 3 seconds to enter setting mode.
Note: after 7 seconds of inactivity, setting mode will deactivate.
• The hour block will flash when you are in hour setting mode.
• Move your finger around the screen in a clock wise direction
to increase the hour or in a counter clock wise direction to
decrease the hour as required.
• If the display sound is on, there will be a beep each time
you increase or decrease the time by an hour.
5. How to set the time and animation
I. Setting the hour for time 1
Button D Button B
Button A
Button C
• Move your finger around the screen in a clock wise direction
to increase the minutes or in a counter clock wise direction
to decrease the minutes as required.
• Hold button B for 3 seconds to confirm and move to the
hour for time 2.
• The minute blocks will flash when you are in minute
setting mode.
• The AM or PM indicator will be displayed to indicate that
you are setting the time in AM or PM.
• Hold button B for 3 seconds to confirm and move to
minutes for time 1.
II. Setting the minutes for time 1
PM indicator
AM indicator
9H
11H
8H
10H
7H
12H 1H
5H
6H
3H
2H
4H
15mn
1mn
45mn
30mn
59mn
• The hour blocks will flash when you are in hour setting mode.
• Move your finger around the screen in a clock wise direction
to increase the hour or in a counter clock wise direction to
decrease the hour as required.
• The AM or PM indicator will be displayed to indicate that you
are setting the time in AM or PM.
• Hold button B for 3 seconds to confirm and move to the
minutes for time 2.
• The minute blocks will flash when you are in minute
setting mode.
III. Setting the hour for time 2
IV. Setting the minutes time 2
PM indicator
AM indicator
9H
12H
6H
3H
15mn
1mn
45mn 30mn
59mn
Indice
