vosfeel MT-210 Manuale utente
Robot Vacuum
MT-210
Before operation this unit, please read this instructions completely and
follow them step by step
1.Important Safety Instructions
When using the product, please keep your vigilance and follow below information:
1. This Appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the Appliance in
a safe way and understand the hazards involved. Children shall not play with the
Appliance. Cleaning and user maintenance shall not be made by children without
supervision.
2. Clear the area to be cleaned. Remove power cords and small objects from the floor
that could entangle the Appliance. To tuck fringe under the rug base, and lift items
such as curtains and tablecloths off the floor.
3. If there is a drop off in the cleaning area due to a step or stairs,you should operate the
Appliance to ensure that it can detect the step without falling over the edge. It may
become necessary to place a physical barrier at the edge to keep the unit from falling.
Make sure the physical barrier is not a trip hazard.
4. Only use as described in this manual. Only use attachments recommended or sold by
the manufacturer.
5. Please make sure your power supply voltage matches the power voltage marked on
the Charging Dock.
6. For INDOOR household use ONLY. Do not use the Appliance in outdoor, commercial
or industrial environments.
7. Do not use without dust bin and/or filters in place.
8. Do not operate the Appliance in an area where there are lit candles or fragile objects.
9. Do not use in extremely hot or cold environments (below-5˚C/23˚F or above 40˚C/104˚F).
10. Keep hair, loose clothing, fingers, and all parts of body away from any openings and
moving parts.
11. Do not operate the Appliance in a room where an infant or child is sleeping.
12. Do not use Appliance on wet surfaces or surfaces with standing water.
13. Do not allow the Appliance to pick up large objects like stones, large pieces of paper
or any item that may clog the Appliance.
14. Do not use Appliance to pick up flammable or combustible materials such as gasoline,
printer or copier toner, or use in areas where they may be present.
15. Do not use Appliance to pick up anything that is burning or smoking, such as cigarettes,
matches, hot ashes, or anything that could cause a fire.
16. Do not put objects into the suction intake. Do not use if the suction intake is blocked.
Keep the intake clear of dust, lint, hair, or anything that may reduce air flow.
17. Take care not to damage the power cord. Do not pull on or carry the Appliance or
Charging Dock by the power cord, use the power cord as a handle, close a door on
the power cord, or pull power cord around sharp edges or corners. Do not run
Appliance over the power cord. Keep power cord away from hot surfaces.
18. If the power cord is damaged, it must be replaced by the manufacturer or its service
agent in order to avoid a hazard.
19. Do not use the Charging Dock if it is damaged.
20. Do not use with a damaged power cord or receptacle. Do not use the Appliance or
Charging Dock if it is not working properly, has been dropped, damaged, left outdoors,
or come in contact with water. It must be repaired by the manufacturer or its service
agent in order to avoid a hazard.
21. Turn OFF the power switch before cleaning or maintaining the Appliance.
22. The plug must be removed from the receptacle before cleaning or maintaining the
Charging Dock.
23. Remove the Appliance from the Charging Dock, and turn OFF the power switch to the
Appliance before removing the battery for disposal of the Appliance.
24. The battery must be removed and discarded according to local laws and regulations
before disposal of the Appliance.
25. Please dispose of used batteries according to local laws and regulations.
26. Do not incinerate the Appliance even if it is severely damaged. The batteries can
explode in a fire.
27. When not using the Charging Dock for a long period of time, please unplug it.
28. The Appliance must be used in accordance with the directions in this Instruction
Manual. vosfeel ROBOTICS cannot be held liable or Responsible for any damages
or injuries caused by improper use.
29. If the robot will not be used for a long time, fully charge the robot and power OFF
for storage and unplug the Charging Dock.
2.Product Composition
Robot
Start/Pause Button
Dust Bin
Power switch
Driving Wheels
Anti-drop Sensors
Anti-drop Sensors
Suction assembly
Universal Wheel
Side Brushes
Charging Contacts
Anti-drop Sensors
Driving Wheels
Charging Contacts
Side Brushes
Bumper strip
Anti-collision Sensor
Top cover
2.Product Composition
Charging Dock
Dust Bin
Cleaning Tool
Filter Net
High Efficiency
Filter (HEPA)
HEPA Cover
Charging Dock Pins
Power Indicator Light
Power Adapter
Power Adapter Port
Dustbin Cover
Dustbin
2.Product Composition
3.Operating and Programming
3.1Notes Before Cleaning
Please refer to the following guidelines to check the cleaning area before using the robot.
Structure of Remote controller
Power
Left
Stop/Start
Turbo
Return home
Forward
Right
Backward
Spot cleaning
Wall following
Remove power cords and small objects from the
Floor that could entangle the products.
Fold tasseled edges of area rugs underneath to
prevent Tangling Robot. Avoid cleaning very
dark colored rugs or high-pile rug.
3.2Quick Start
Charging Dock Placement
1.Connect the adapter to the charging Dock
Place the Charging Dock on a level floor surface against the wall with the base
perpendicular to the ground. Keep the immediate area 2m (6.6’) in front of the charger
and 1 m (3.3’) on both sides of the charger clear of objects and reflective surfaces.
Plug the Charging Dock in. The Power Indicator Light on the Charging Dock glows.
Please be aware that the robot needs at least an
8 cm (3”) clearance to clean under furniture
without complications.
If there is a step or stairs in the cleaning area, please operate
robot to ensure its Anti-Drop Sensors can detect the drop off.
It may be necessary to place a physical barrier at the edge of
the drop off to keep the unit from falling over the edge
！ ！
Keep Robot away from wet,
flame and burning
Robot may climb on top
of object less
3ft/1m
3ft/1m
6ft/2m
3.Operating and Programming
Start to Charge
1.Turn on the power
Open the unit top cover, push the switch to " I "
(" I " is for turn on, " o " is for turn off). when the
robot finished work, please don't turn off: keep
the robot under charging, better for next time
cleaning.
2.Install Side Brushes
Attach Side Brushes to the bottom of robot by pressing a brush into each slot until
it clicks.
Place the charging Dock
side brush
side brush
Connect the power supply
2.Charge Robot
Charging Contacts on robot and the Charging Dock
Pins make a connection.
Button in breathing status when robot is charg
ing. Button stops glowing after robot is fully charged.
Usually take 5.5 hours from low battery mode to
fully charged.
Start/Stop Cleaning
1. Start or stop by pressing the Start button key or the remote control's key.
Note: Before starting the Robot, make sure that the outer ring of the key is white
and the Robot is in the state of being awakened. If the Robot does not wake up,
short press the key to wake it up.
The appliance enters the sleep state after 10 minutes of standby, and the key light is
off.
2. If you need to select another mode, please refer to the(Mode Selection)section.
Mode Selection
In order to adapt to different ground conditions and achieve deep cleaning, this product has
a variety of cleaning modes, which can be selected by remote control as needed.
The remote control can switch any mode directly.
Before starting the mode, make sure that the outer ring of the key is white and the
appliance is in the state of being awakened. If the appliance does not wake up, short press
the key to wake it up.
Contacts on robot and
the Charging Dock Pins
make a connection.
3.Operating and Programming
1.Fixed-point Mode
It is suitable for the ground environment
where the garbage is concentrated. The
Robot will centralize cleaning in the
designated area with the "spiral" route.
4.Maintance
4.1Dust Bin and Filters
Open the middle cover to take out the dust bin, open the dust bin cover and empty the
garbage.
2.Edge Mode
It is suitable for cleaning at the corners of
the room. The Robot is cleaned around the
periphery of a fixed object (such as a wall)
and back to the charging dock after
cleaning.
3.Return Charging Mode
During the cleaning process, the appliance
can sense that its power is insufficient, and
automatically find the charging stand for
charging. You can press the “Remote
control home” button or press the
“equipment home” button twice to make
the appliance return to the charging stand
for charging.
Indice
