Vosonic GV6200 Manuale utente
GV6200
User’s Guide
Rev.A
_______________________________________________________________________
2008 Vosonic Technology Corporation. All right reserved.
Part Number: 845550002001
Thank you for purchasing Vosonic GV6200.
1.Before using Vosonic GV6200, you will have to
----------------------------------------------------------------------
1-1. Make sure the memory card has already partition
or re-format again.
1-2. Check www.vosonic.com to download the
update firmware that we offer new functions and
improved features.
Enjoy your GV6200
The Vosonic Team
Dear Customer
2
CAUTION
Under no circumstances should you try to repair the system
yourself, as this will invalidate the warranty. Do not open the
system as there is risk of electrical shock.
FCC Certifications
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
3
IMPORTANT WARRANTY INFORMATION
yTo reduce the risk of fire or shock hazard, do not expose
this equipment to rain, any liquid or moisture.
yVosonic shall have no obligation to repair, replace or refund
until the customer returns the defective product to Vosonic.
yThe repairs and replacement service will not apply to
PRODUCT units that were misused, repaired without
authorization ort by other reasons beyond the range of
intended use.
yAny replacement product may be either new or like –new,
provided that it has functionality at least equal to that of the
product being replaced.
yVosonic is not responsible for any data stored on returned
products, please backup any data prior to shipping the unit.
yThe limited warranty for accessories (included battery ) is
only valid for 6 months from the date of purchasing..
y
A
ll OUT OF WARRANTY repairs maybe subject to a normal
repair fee. Please contact your dealer or Vosonic for current
charges.
Package Checklist
yMain unit
yMounting Bracket
yEnglish user's guide
yMini 5 Pins USB Cable
yComposite (RCA Yellow) Video Cable
yPower Adapter (100-240V auto switched )
4
Camera
1/3” color CMOS 1.3 Mega Pixel camera
70 degree field of view for camera and
motion detection
Recording mode Motion detected recording
Continuing recording
Video Recording format
Codec: MPEG-4
Format: MP4
Resolution: 640x480 Pixels
Frame Rate: 20~30 fps
* The frame rate is subject to the speed of
memory card
Support memory card Secure Digital Card (SD)
SD High Capacity (SDHC)
Digit display indicator
Counting number of motion detected times
Error message
Operating status
LED indicator Recording mode or stand-by mode
Error message
USB Interface USB 2.0
Video Output Composite Video output
NTSC & PAL
Power Supplier 5V/2A DC IN
Dimensions 90 x 43 x 127mm (L x W x H)
zPlease visit our web site to download the most recent manual and software.
Specifications
5
2. Overview of Panels & Keys
USB Port
Hanging Rail
(Track)
Camera Angle Adjuster
DC Jack
RESET
SD card slot
4-digit 7-segment display
Indicator (Counter)
Battery Status
Night Vision
IR LED x 8
Microphone
Video-Out Jack
Error LED indicator
Status LED indicator
6
keypad Function Description
Loop/Clear
A short press places the recording into loop mode.
A long press will clear all the recording files.
( Data written to memory card will be all lost)
(See 5.4 )
Stop/Set A short press will stop the recording and put the unit
in standby.
(Data written to memory card will not be lost)
A long press allows you to set the type of your
television broadcast standard. (PAL or NTSC)
Enter/Time A short press to display the current time.
A long press will allows you to set the timer.
Camera Angle
Adjuster
Allows you to adjust camera head.
H/M/L Parameter for motion Detection
(see How to configure Motion Detection)
Video-Out Jack Before recording, use the video-out function on TV
screen to adjust the camera head.
Will disable to loop while recording
Continuous-loop recording
1. Plug the GV6200 power adapter into a working electrical outlet.
2. Long press the [ Enter / Time ] button for timer setting.
3. Set the value for the timer by using [ Loop/Clear ] button.
4. To change between year,month,hours, minutes,seconds,short press
the [ Timer] button.
The 4-digit 7-segment display indicator displays as follows:
Year
Month
Date
Hour
Minute
Second
3. Timer Setting
8
The LED indicators flash as follows:
Unlit Steady for normal operation
Error
Red -Erroneous operation occurs
See If an erroneous operation occurs
-USB mode
Unlit No power connectionStatus
Red Slow Flash : Steady for normal operation
No Flash : - Erroneous operation occurs
- USB mode
Flashing : An object that appears in the region
triggers the motion detection
Unlit Full chargedBattery
Red Charging…
Note: The GV6200 includes one Li-ion battery,
this is to ensure no critical shot is ever missed
during 1 hour power cut.
To completely shut down the unit, you can press
[reset ] button.
Note the night vision function will not work
during power cut.
4.LED indicators:
The motion detection feature is used to generate an alarm whenever
movement occurs in the image.
1. Adjust Parameter (see table below for details).
Parameter Object Size History Sensitivity
H : High continuous-loop recording ensures that no critical shot is ever missed
*The counter will not count up in this mode.
M: Middle Very small objects
trigger motion
detection
An object that appears in
the region will trigger the
motion detection for a long
period.
Ordinary colored
objects against
ordinary backgrounds
will trigger the motion
detection
L : Low Only very large
objects trigger motion
detection
An object that appears in
the region will trigger the
motion detection for a very
short period.
Only very bright
objects against a dark
background will trigger
motion detection
2. Plug the GV6200 power adapter into a working electrical outlet.
Aim the motion detector at the field of view you want covered.
3. Insert the SD card into the SD card slot.
NOTE: Please carefully insert the memory card with the front of the card
facing the LED. .
4.The LED on the back side will show Fo: or Fo-- ; it is asking
“Do you want to format the SD card ? “
You can press [Enter] to format the card or [ Loop] to enable the
recording.
5. While the parameter is set at M or L , counter will track the number of
video files when the device detects any movement occur.
Note: The unit will automatically being to record when it has
been idle for 10 seconds.
5.How to configure Motion Detection:
Indice
Altri manuali Vosonic Macchina fotografica digitale
