Voyager AOM452 Manuale utente

AOM452

In-Car LCD Display System Package

Owner’s Manual

Features:

•4.5” TFT Color LCD Display

•Camera 1 input for Rearview camera.

•Camera 2 input for Side view camera

•Navigation Input

1

Preface

There is a blind spot that exists at the back of a vehicle while the vehicle is

in reverse. Equipped with a camera, this rearview monitor enhances safety

by providing the driver with a clear and wide image of the area behind the

vehicle while it is in reverse.

Warning: Backing up vehicle

Do not back up vehicle while watching the monitor screen. Always look in

the direction of vehicle motion. Use the monitor as an aid in safety

confirmation. The distance looks different in the monitor. The actual

distance is shorter than it looks in the monitor. The range of image is

limited.

Cautions

1. The product is intended to assist in safe driving and to allow the

driver to have a broader rearview while backing up. You, as the

driver, are solely responsible for the safe operation of your vehicle

and the safety of your passengers according to the country and their

local traffic regulations. Do not use any features of this system to the

extent it distracts you from safe driving. Your first priority while

driving should always be the safe operation of your vehicle.

Audiovox Specialized Applications LLC. cannot accept any

responsibility whatsoever for accidents resulting from failure to

observe these precautions or safety instructions

2. When using the hands free feature, you should observe the road

situation carefully to avoid traffic accidents.

3. It is Illegal in most states to have a video image in direct view of the

driver. Do not watch movies while driving.

2

1. Controls and Indicators

Figure1

Figure1 illustrates the controls and indicators of the AOM452 Monitor:

A: 4.5” TFT color LCD

B: “”button (power button)

Switches the unit between Manual mode and Standby mode.

Standby mode:

a. When in standby mode the unit will be turned on when either the Camera 1 or

Camera 2 trigger is triggered. The unit will turn off when the triggers are

released.

b. The unit will turn on if the Power button; Camera button or Map button is

pressed. The power button will need to be pressed to turn the unit back off.

Manual mode:

a. When in manual mode, the operator can manually switch between Camera 1,

Camera 2 and Map mode.

b. Manual mode is activated by pressing the Power button, camera button or Map

button.

3

C: “CAM”button: Switches between Camera 1 and Camera 2.

Camera 1 – Dedicated to the reverse circuit of the vehicle. The mode will

override the current video source when the Camera 1 trigger wire is triggered.

Camera 2 – Dedicated to the turn signal circuit of the vehicle. This mode will

handle the turn signal pulse applied when the vehicles turn signals are activated.

D: “MAP”button:

Activates the Navigation screen and toggles between different map modes

for the navigation unit.

E: Inside Infra-RED Receiver for Navigation Remote Control.

F: “- ”Button:

Incrementally Decreases the LCD Brightness.

G:“+”Button:

Incrementally Increases the LCD Brightness.

2. How to Turn the LCD Monitor On/Off:

a) The monitor turns on every time the ignition key is turned on and system

power on.

b) The monitor turns off every time the Ignition key is turned off and

the system power off.

3. How to view the Camera 1 rear observation image:

c) The monitor will display the rear observation Camera 1 image whenever the

vehicle is shifted into the reverse gear. The rear observation Camera 1 image

returns to the previous source automatically any time the gear selector is

moved out of the reverse position.

d) If you want to view the rear observation Camera 1 image at any other time,

press CAM Button to view the rear observation Camera 1 image

4

4. How to view the Camera 2 turning image:

a) The monitor will display the turning Camera 2 image whenever the vehicle

turns , the monitor would return to previous source automatically after the

vehicle turned.

b) If you want to view the turning Camera 2 image at any other time, press CAM

Button to switch the turning camera image.

5. How to view the Navigation image:

1. Press the MAP button to turn the Navigation display on. Each press of

the MAP button will toggle the Navigation unit through a series of

mapping screens

2. Press the Power button to turn the unit off.

Maintenance

Your rearview monitor requires little care, however to maintain it in

optimum condition follow the procedures below:

1. Keep your system away from excessive moisture, extreme heat

or cold and magnetic fields.

2. Keep liquids away from the display.

3. Do not place external devices or other objects on the top of the

mirror.

Occasionally clean the surface of the mirror with a soft cloth moistened

with water or window cleaner.

5

www.asaelectronics.com

128-6927

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione