VS Sassoon VSM7565A Manuale utente

TOOL TIPS

THECREWCUT

for the supreme self-cut clipper to maintain

a short or crew cut look.

HEY YOU!

TAKE A BOW FINE SIR.

THINGS ARE LOOKING UP

& YOU’VE JUST MADE A

QUALITY PURCHASE

WITH THIS NEW GROOMING TOOL.

WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO

USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS

TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.

HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION +

A HANDY VIDEO ON HOW TO GET THE MOST OUT OF YOUR NEW CREW CUT.

THE CREW CUT / TOOL TIPS

1. Rotary cutting comb

2. Premium Japanese

steel blades

3. Lithium-ion power

4. DC direct drive motor

5. Mains corded or

cordless use

6. Clever circular shape

fits in the palm of

your hand

7. Lock-in comb guide

for grades #1 – 4

(3mm to 13mm)

8. Comb guide locking

mechanism

9. Finishing trimmer

10. Trimmer blade

11. Storage pouch

12. Barber comb

13. Cleaning brush

14. Oil

THE CREW CUT

BRAVO. YOU’VE MADE A QUALITY PURCHASE.

The Crew Cut is the supreme self-cut clipper to maintain

a short or crew cut look.

6 9

THE CREW CUT / TOOL TIPS

PREPPING YOUR

NEW TOOL

CHARGING

The Crew Cut is so easy to use – it’s as easy as moving your hand around your

head. But before you start using your new tool, you must take the time to charge

it for 3 hours before its first use. Your new tool comes with a small amount of

charge, but even if you want to use it plugged straight into the mains, the initial

super charge ensures optimum power performance to give you smooth fast

cutting, every time.

- Before using for the first time, fully charge your new tool

continuously for 3 hours.

- Maximum battery capacity will only be reached after 3 charging

& discharging cycles.

- Ensure your new tool is switched off.

- Insert the small plug on the charging adaptor into the socket on

the side of your new tool.

- Plug the charging adaptor into a suitable mains power socket and switch on.

- The red charging LED indictor light on your new tool will flash when

correctly connected to the mains power. When it is fully charged, the red

charging LED indicator light will remain on.

- A full charge will supply 60 minutes cordless runtime.

- A quick charge of 30 minutes will supply 15 minutes cordless runtime.

- To maintain optimum capacity of the li-ion battery, it is highly recommended

to fully discharge & then recharge your tool for 3 hours every 6 months.

- When using connected to mains power, the clipper should not be used

for longer than 20 minutes.

THE CREW CUT / TOOL TIPS

- When the clipper is about to run out of energy,the charging indicator will

flash to indicate that you have less than 15% battery capacity remaining.

Once flashing starts.

-WARNING: If the charging light suddenly starts to flash rapidly, the appliance

is faulty. If this happens, please stop charging and remove the adapter from

the outlet and contact our customer care center for further advice

(see the warranty section of the information booklet)

OILING THE BLADES

To get the sharpest, more precise cut, it is highly recommended to oil the blades

before each use.

Using the oil supplied with your new tool, unscrew the cap & cut off the very

end of the plastic tube with a pair of scissors to release the oil.

Switch your tool on, gently squeeze the oil tube & apply 5 drops of oil around

the circular blades. Leave the tool on for a further few seconds to allow the oil

to thoroughly spread around the entire circumference of the blades. Switch off

the tool & remove any excess oil by gently dabbing with a cloth.

TO GET THE SHARPEST, MORE PRECISE CUT,

IT IS HIGHLY RECOMMENDED TO OIL THE BLADES

BEFORE EACH USE.

THE CREW CUT / TOOL TIPS

GETTING TO KNOW

YOUR NEW TOOL

The clipper has evolved. The Crew Cut has been designed in a clever circular

shape to fit in the palm of your hand for an easy ‘DIY’ hair cut.

PREPPING YOUR HAIR

To achieve your perfect short cut, longer hair needs to be pre-cut to a grade #4

before using The Crew Cut. The Crew Cut is designed to maintain an already short

or crew cut look.

A NEW WAY OF CLIPPING

Just like riding a bike, new things can take some practice, and the Crew Cut

is no different. The more you use it, the more comfortable you become.

This clipper has been designed with a unique rotary cutting action & circular

comb guide. Because of this revolutionary technology the cutting technique

differs to that of a normal clipper. In fact, this cutting technique is much

simpler.

Start cutting at the back of the head and with a sweeping motion run from

the back to the front of your head, concentrating on one area at a time until

you reach the desired length.

After a few passes of cutting over the head, you should empty any loose hairs

that have gathered at the centre of the clipper. This will free up space for

smoother, faster cutting. The gathered hair can easily be emptied into a bin.

Once you’ve completed this sweeping cutting motion over your whole head, you

should then finish using circular motions, as this ensures you achieve a perfect

even finish.

THE CREW CUT / TOOL TIPS

HANG IN THERE!

When you first begin cutting, you may notice that some hair is being cut while

others are left long – this is perfectly normal, especially if you are cutting

longer hair. This is because hair grows in different directions & this clipper is

designed to be used in all directions against the hair growth. So continue cutting

in a back and forth sweeping motion until all hair is cut to length, then the use of

circular motions over the whole head will ensure an even finish.

USING CIRCULAR MOTIONS OVER THE WHOLE

HEAD WILL ENSURE AN EVEN FINISH.

THE CREW CUT / TOOL TIPS

HOW TO USE

THE CREW CUT

BEFORE USING

- Always inspect the clipper for noticeable signs of damage.

- Always inspect the clipper before use to ensure the blades are free

from hair, debris etc.

- Ensure the clipper blades are well oiled before using.

- Ensure the clipper is sufficiently charged before use.

- For best performance use on clean, dry hair that has been combed

until tangle-free.

- If hair is long, use the scissors & comb provided to cut the hair prior

to using the clipper.

- Prior to use always inspect the head for warts, moles, spots and broken skin.

If using the clipper on yourself either use mirrors or ask another person to

check for you.

- Special care should be taken when cutting hair in areas that have warts,

moles, spots or broken skin, to prevent injury.

- Remove any head jewellery such as earrings and necklaces before use.

The Crew Cut is for use on the head only. Never use this clipper on the face

or any other area of the body.

THE CREW CUT / TOOL TIPS

IMPORTANT

Do not attempt to trim hair close to your ears with this clipper. Never allow ears

to enter the ring of the clipper blade. A separate trimmer has been provided to

trim around the ears, the neckline and sideburns.

SELECTING A CUTTING LENGTH

The Crew Cut comes with 1 lock-in comb guide that adjusts to 4 different cutting

lengths.

GRADE #1 3mm

GRADE #2 6mm

GRADE #3 9.5mm

GRADE #4 13mm

ATTACHING THE COMB GUIDE

To attach the comb guide, make sure the clipper is switched off. While holding

the clipper with the blades facing upwards, place the comb guide over the top of

the clipper with the teeth of the comb facing upwards. Release the comb guide

locking mechanism, located on the side of the clipper (fig.5), by sliding it away

from the comb guide. Line up position A on the comb guide (fig.1) with position B

on the clipper (fig.2) then gently rotate the comb guide in a clockwise direction

until it clicks into place. Make sure that the locking mechanism is in the locked

position and the comb guide is securely in place before using the clipper.

Fig. 4 Fig. 5 Fig. 6

Fig. 1 Fig. 2 Fig. 3

A B

Indice

Altri manuali VS Sassoon Tagliacapelli

VS Sassoon

VS Sassoon X5 PRO Manuale utente

VS Sassoon

VS Sassoon VSM7118A Manuale utente

VS Sassoon

VS Sassoon I-CLIP AUTOMATIC VS7930A Manuale utente

VS Sassoon

VS Sassoon VS7920A Manuale utente

VS Sassoon

VS Sassoon VSM7473A Manuale utente

VS Sassoon

VS Sassoon VS7183A Manuale utente

VS Sassoon

VS Sassoon THE CRAFTED MAN VSM750A Istruzioni per il montaggio

VS Sassoon

VS Sassoon VSM743TA Istruzioni per il montaggio

VS Sassoon

VS Sassoon THE STYLE CUT Manuale utente

VS Sassoon

VS Sassoon Turbo Power Clipper VSM318DNA Manuale utente

VS Sassoon

VS Sassoon LITHIUM-PRO CERAMIC VSM7474A Manuale utente

VS Sassoon

VS Sassoon XPERT CLIP VSM990A Istruzioni per il montaggio

VS Sassoon

VS Sassoon Rugged Commander VSM423RA Istruzioni per il montaggio

VS Sassoon

VS Sassoon VSM795A Manuale utente

VS Sassoon

VS Sassoon TURBO-PRO VS7702A Manuale utente

Manuali Tagliacapelli popolari di altre marche

Clatronic

Clatronic HSM 800 Manuale utente

Mellerware

Mellerware MACRO ALDANY MA20001 Manuale utente

Create

Create CLIPPER EASY Manuale utente

VALERA

VALERA X-Master 652 Manuale utente

Wahl

Wahl 1870Li Manuale utente

Remington

Remington HC5780 Manuale utente

Lister

Lister Legend Manuale utente

Philips

Philips HC5440/80 Manuale utente

Andis

Andis MBA 23125 Manuale utente

Philips

Philips Philishave HQC488/61 Manuale utente

Shear Magic

Shear Magic Nifty 1800 Manuale utente

Philips

Philips QC5390 Manuale utente

Andis

Andis US-1 Guida di riferimento rapido

Panasonic

Panasonic EH-KA81 Manuale utente

Philips

Philips HC5450 Manuale utente

Andis

Andis US-1 Istruzioni per l'installazione

Remington

Remington Classic HC450 Manuale utente

Andis

Andis ML Istruzioni per l'installazione