Vulta Blizzard FS-E51 Manuale utente
FS-E51
USER MANUAL
BLIZZARD 1000 LUMEN
SEARCH & RESCUE LED FLASHLIGHT
Thank you for choosing Vulta.
The Vulta Blizzard FS-E51 projects an
ultrabright white light with a crisp, wide
beam. Designed for search and rescue
applications, this high-output flashlight
features three constant-on modes with
a maximum output of 1,000 lumens
capable of penetrating deep into the
woods. The 56 lm minimum is ideal for
close work when your eyes are adjusted
to the dark, and the strobe mode can
be used for emergency signaling and
communication. The FS-E51 is operated
entirely by the variable-control ring on
the lamp head, making this model one
of our most intuitive flashlights.
The Blizzard FS-E51 incorporates the
CREE XM-L2, a breakthrough LED
market-leader, which combines high
efficiency with high drive-current.
02 VULTA BLIZZARD
03
VULTA BLIZZARD
The LED is housed in an ultraclear,
tempered glass lens that optimizes
resistance to impacts and scratches and
maximizes throw distance.
Crafted from MIL-SPEC Type III hard
anodized aluminum alloy with a removable
crenellated bezel, and with a waterproof
rating of IPX-8, the Blizzard FS-E51 is
a rugged tool that will withstand harsh
environments. The knurled grip, deep-
machined heat-sink fins, and oversize
variable-control ring provide enhanced
performance when holding the flashlight
with cold or wet hands or while wearing
gloves. Powered by three CR123 or RCR123
batteries, the FS-E51 delivers the brilliance
of a powerful searchlight in a body that's
compact enough to fit in your coat pocket.
04 VULTA BLIZZARD
PRECAUTIONS ⚠⚡
• Please read and follow these instructions, and
keep this manual in a safe place.
• This flashlight is extremely bright and
can cause temporary or even permanent
blindness. Do not shine the flashlight in the
eyes of any person or animal. When powering
on the flashlight, make sure to point it down
or away from you and anyone else.
• The surface of this product can become hot
after prolonged use. Be careful when touching
it, and make sure to keep it away from
anything flammable or combustible.
• Do not stand the flashlight upright on its lamp
head when powered on. In this position, the
lamp head can become dangerously hot and
damage the flashlight and anything nearby.
• Never leave the flashlight unattended when it
is powered on.
• Before long-term storage, remove the
batteries and store them in a cool and dry
place to avoid leakage.
• Always install batteries of the same type,
brand, and age. Do not combine different
types or brands, or old and new batteries. This
05
VULTA BLIZZARD
can cause the batteries to leak, overheat, or
explode.
• Install the batteries in the proper orientation
as indicated by the markings in the battery
carrier. Installing batteries in the reverse
orientation can cause them to leak, overheat,
or explode, and will void the warranty.
• This product is waterproofed for freshwater
only. If it comes into contact with salt water,
immediately dry the flashlight and remove
the batteries, reassemble, and rinse with
freshwater. Dry thoroughly and install new
batteries.
• Do not attempt to disassemble or repair this
product. It is dangerous and will also void the
warranty.
• Keep this product away from children. Do not
leave children unattended near this product.
• Use only parts provided by the manufacturer.
• Make sure that this product is intact and that
there are no missing parts.
• To avoid damage to this product, be careful
not to overtighten or improperly thread any of
the threaded fittings.
• All photos are for illustrative purposes only.
06 VULTA BLIZZARD
ACRENELLATED
BEZEL
BLED
CLAMP HEAD
DHEAT SINK
AREA
EVARIABLE-
CONTROL RING
FO-RING
GGRIP
HLANYARD
EYELETS
Also Included:
HOLSTER
LANYARD
SPARE O-RING
USER MANUAL
TWO-YEAR
LIMITED
WARRANTY
C
D
AB
E
F
H
G
PRODUCT DIAGRAM
07
VULTA BLIZZARD
A Note about Maximum Output
When the flashlight is in High mode, the
battery discharge, drive circuit, and LED will
all be producing heat, and the lamp head may
become extremely hot. Please be cautious
when touching it. To protect the battery,
circuit, and LED, and to extend the lifetime
of the flashlight, we do not recommend
continuously running the flashlight on High
mode for more than 10 minutes.
INSTALLING BATTERIES
The Blizzard FS-E51 is powered by three
CR123 or RCR123 (3 or 3.7 V) batteries. The
batteries are inserted into the all-aluminum
battery carrier, which is housed in the
flashlight's grip. The battery carrier can be
preloaded so it’s always ready for use. To
facilitate quick and easy loads in low-light
situations, the carrier can face either direction
when you insert it into the grip.
Note: Make sure to load the batteries with
the positive and negative terminals facing the
proper directions.
08 VULTA BLIZZARD
To install a battery, follow these steps:
1. Unscrew the lamp head from the grip and
remove the battery carrier.
2. Insert three fresh CR123 or RCR123
batteries into the battery carrier. Make sure
the batteries are facing the proper direction as
indicated by the markings in the carrier.
3. Insert the battery carrier into the grip.
4. Screw the lamp head onto the grip until
secure.
OPERATION
The Blizzard FS-E51 employs a variable-
control ring to turn on the flashlight, control
output power, and engage Strobe mode.
POWERING ON THE BLIZZARD FS-E51
To power on the FS-E51, rotate the variable-
control ring clockwise. The unit will emit light
immediately upon turning on.
09
VULTA BLIZZARD
SETTING THE MODE
High/Medium/Low: There are three constant-
on modes: High, Medium, and Low. Rotate
the variable-control ring so it clicks into place
as it rests under the markings for each of the
three constant-on settings to set the output
power.
Strobe Mode: Strobe mode continuously
emits quick flashes of bright light. To enter
Strobe mode, rotate the variable-control ring
clockwise all the way, so it rests under the
Strobe-mode marking [ ].
THE LANYARD
You can attach and wear the included lanyard
to help prevent accidental drops and to free
up a pocket. To attach the lanyard, clip it onto
one of the lanyard eyelets on the flashlight’s
tailcap.
10 VULTA BLIZZARD
O-RING MAINTENANCE
The Blizzard FS-E51’s O-ring is installed
on the threaded portion to help seal out
water. The O-ring is prelubricated to extend
its lifetime, ensure smooth operation, and
increase water resistance. If the O-ring dries
out or there is little or no lubricant remaining,
we recommend applying a small amount of
O-ring lubricant.
The FS-E51 comes with a replacement O-ring.
If the original wears out after long-term use,
replace it with the included spare.
Indice
