VWR VisiCam HDMI13 Manuale utente
Model European Catalogue Number
HDMI13 630-2627
INSTRUCTION MANUAL
Version: 3
Issued: 27, 07, 2015
VWR
Pro HDMI
2
Legal Address of Manufacturer
Country of origin: ITALY
Europe
VWR International bvba
Researchpark Haasrode 2020
Geldenaaksebaan 464
B-3001 Leuven
+ 32 16 385011
http://be.vwr.com
Table of Contents
Package Contents
Installation of camera drivers and software
Some notes
How to test your Camera
Select the right driver
Getting started with VisiCam, a very easy measuring and documentation software.
Getting started with optika IsView, a complete software for measuring, adjusting, capturing images
and video clip.
HDMI user guide
HDMI Operation
Technical service
Warranty
Compliance with local laws and regulations
Disposal
3
Package Contents
DESCRIPTION QUANTITY
HDMI Camera 1
12V 2000mA power supply 1
SD card 1
USB cable 1
HDMI cable 1
Calibration slide 1
CD 1
Mouse 1
4
Installation of camera drivers and software
1. Operating system requirements: all the Windows O.S.
2. Please insert your CD and run:
\VisiCam\ setup.exe
3. Now the VisiCam icon appears on your desktop.
4. Please Run
\optika IsView\ setup.exe
5. Now the optika IsView icon appears on your desktop
6. You don’t need to install any driver.
7. PlugtheCamerainyourPC:thecamerawillbeidentiedautomatically.
Some notes
Often a PC has some ports on the front and some on the back: the ports on the back are usually faster. We
suggest to use these ones.
If you connect the camera into another USB port, Windows needs to recognize its Driver again even if it has
already done this operation for the first USB port.
It may happen sometimes that Windows doesn’t recognize a Camera using one of your PC USB ports, while
gives no problem using another port.
How to test your Camera
In order to check if your Camera works correctly, it’s not necessary to put it into the microscope: it’s enough
to connect it into the USB port, run VisiCam using the icon on your desktop, select the right driver and check
whether the shown image is not totally black.
Select the right driver
Please select: USB CAMERA.
With VisiCam you have to tell the Software which is the Driver by selecting the microscope-shaped icon.
With optika IsView the live image coming from your camera will automatically appear.
5
Getting started with VisiCam, a very easy measuring and documentation soft-
ware.
Run VisiCam by clicking on its icon on your desktop.
Select the right Driver for capturing the image. Note that after choosing the driver and before capturing the
image you can set the brightness, saturation, gamma ecc..
Then you can capture the image.
The image is now ready for being manipulated using VisiCam.
Getting started with optika is view, a complete software for measuring, adjust-
ing, capturing images and video clip.
Run optika IsView by clicking on your desktop.
The live image with easy buttons for set your camera live view will automatically appear.
6
HDMI user guide
1. USB interface.
A: Connect a mouse to the USB port. Use the mouse to control the camera directly.
B: Connect the USB port to PC to make the camera work as a Driver-Free camera.
2. HDMI interface.
Use the HDMI cable to connect the camera to the HDMI monitor.
3. Power interface.
Please use the provided 12V2A power supply. When power is plugged in the red light is on. When switch on the
camera blue light is on.
4. ON/OFF KEY
Press and hold the ON/OFF key until the blue light is ON, press the ON/OFF key again to turn the camera off.
5. SD CARD
To get faster and more stable data transfer recommend to use “Class10” SD card we supply a 8 giga SD card.
6. C MOUNT
Standard C-mount optical port.
POWER LIGHT WORKING LIGHT
POWER
TURN ON/OFF
HDMI
USB
SD CARD
7
HDMI Operation
Step 1. Connect the camera.
1. Plug in the 12V2A power supply. Use HDMI cable to connect the camera to the monitor. Press and hold
ON/OFF key until blue light is on.
2. Connect the mouse to the USB port. Move the cursor to get the settings on the screen.
3. Insert the SD card.
Step 2. Move the cursor to the left of the screen.
When move the cursor to the left of the screen, ‘Capture’ and ‘Setting’ icons will appear (See image on the left
side). Click ‘Setting’ to get parameter setting menu (See image on the right side).
8
Step 3. Move the cursor to the right of the screen.
Step 4. Check the images and videos you have captured on the SD card.
1. Check the album and delete the images.
9
2. Check the video and delete the video. To delete the video successfully, be sure this video is not in use.
Step 5. Compare preview with the captured images.
Connect the camera to the PC
1. Use the special USB cable for connecting the camera to the PC.
2. Plug in the 12V 2A Power Supply.
3. Press and hold the on/off key until the blu light is on.
4. Run the Optika IsView software, please open the on-line help to discover all the software features.
10
Technical service
Web Resources
Visit the VWR’s website at www.vwr.com for:
•Completetechnicalservicecontactinformation
•AccesstoVWR’sOnlineCatalogue,andinformationaboutaccessoriesandrelatedproducts
•Additionalproductinformationandspecialoffers
Contact us For information or technical assistance contact your local VWR representative or visit. www.vwr.
com.
Warranty
VWR International warrants that this product will be free from defects in material and workmanship for a period
of 24 months from date of delivery. If a defect is present, VWR will, at its option and cost, repair, replace, or re-
fund the purchase price of this product to the customer, provided it is returned during the warranty period. This
warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication, or from
ordinary wear and tear. If the required maintenance and inspection services are not performed according to the
manuals and any local regulations, such warranty turns invalid, except to the extent, the defect of the product is
not due to such non-performance.
Items being returned must be insured by the customer against possible damage or loss. This warranty shall
be limited to the aforementioned remedies. IT IS EXPRESSLY AGREED THAT THIS WARRANTY WILL BE IN
LIEU OF ALL WARRANTIES OF FITNESS AND IN LIEU OF THE WARRANTY OF MERCHANTABILITY.
Compliance with local laws and regulations
The customer is responsible for applying for and obtaining the necessary regulatory approvals or other authori-
zations necessary to run or use the Product in its local environment. VWR will not be held liable for any related
omission or for not obtaining the required approval or authorization, unless any refusal is due to a defect of the
product.
Indice
Lingue:
Altri manuali VWR Microscopio
VWR
VWR VisiScope 500 Series Manuale utente
VWR
VWR ViciScope 200 BL254 Manuale utente
VWR
VWR VisiScope 534 Series Manuale utente
VWR
VWR VistaVision 82026-614 Manuale utente
VWR
VWR VisiScope ML103 POL Manuale utente
VWR
VWR VisiScope TL384 POL Manuale utente
VWR
VWR VisiScope 400 Series Manuale utente
VWR
VWR VisiScope MSL100 Series Manuale utente
VWR
VWR VistaVision 82026-636 Manuale utente
VWR
VWR VisiScope 300 Series Manuale utente
VWR
VWR VisiScope 300 Series Manuale utente
VWR
VWR avantor 600 Series Manuale utente
VWR
VWR VisiScope 300 Series Manuale utente
VWR
VWR VisiScope BL224T1 Manuale utente
VWR
VWR VisiScope ML103 Manuale utente
VWR
VWR Visiscope 800 Series Manuale utente
VWR
VWR VisiScope 300 Series Manuale utente
VWR
VWR VisiScope 384 Series Manuale utente
VWR
VWR VisiScope 400 Series Manuale utente
VWR
VWR VisiScope 300 Series Manuale utente
