VXI BlueParrott B250-XT Manuale utente
Compatible with Bluetooth phones & Bluetooth enabled
computers (Windows® or Macintosh®)
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
TABLE OF CONTENTS
1 - Safety Instructions / Glossary
2 - Charge the Headset
3 - Battery Power Indicators
4 - Headset Controls
5 - On / Standby / Off
6 - Pair Headset with the Phone
7 - Microphone Positioning
8 - Make a Call / End a Call
9 - Answer a Call / End a Call
10 - Pairing with a Computer
11 - Operation While Using the Charger/Adapter
12 - Last Number Redial
12 - Reject a Call
13 - Voice Dial
13 - Transfer Audio
14 - Turn Headset Indicator Lights Off/On
14 - Automatic Bluetooth Connection
15 - Multiple Device Pairing
16 - Reset Paired Devices List
17 - Specifications
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
SAFETY INSTRUCTIONS/GLOSSARY
• Avoid hearing damage. Set volume at lowest comfortable
level. If you experience ringing in your ears or
people sound muffl ed, stop using the headset. Avoid
turning up volume to block noisy surroundings (it’s
possible to adapt to volume that is too high).
• Check with local and state laws regarding cell phone
handset usage while operating a motor vehicle.
• Replace only with same or equivalent battery.
• Dispose of batteries according to local regulations.
• Do not throw batteries in a fi re, as they could
explode.
• Do not immerse any part of this product in water.
• Plastic bags and small parts may cause choking if
ingested. Keep them away from small children and pets.
• Use only the power cords included with this product.
• Avoid temperatures exceeding 140°F (will cause
equipment failure).
GLOSSARY OF TERMS
Paired - Two Bluetooth devices agree to communicate with
one another.
On - Headset is on but there is no connection to the phone
(red light will flash).
Standby Mode - Headset is on, Bluetooth link is active, the
user is not on a call (blue light will fl ash).
Talk Mode - Headset is being used with the cell phone while
the cellphone is on an active call.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
CHARGE THE HEADSET
Select charger cord and plug
it into the charger port on
the headset. Charge for 12
full hours before fi rst use.
N
ote: If you do not use your
headset for a long period of
time, you should repeat this
12 hour charge.
Failure to charge
less than 12
hours may result
in shorter talk
time.
AC CHARGE
R
DC CHARGE
R
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
BATTERY POWER INDICATORS
Indicator Light
After the initial 12 hour charge, the indicator lights will
indicate the level of battery power as follows.
Green light: Fully charged. Up to 16 hours talk time.
Green & red lights together: Approximately 60 seconds away
from full charge.
Red light: Less than a full charge.
Keep charger plugged into headset when not in use
to avoid battery drain. It’s not necessary for the
charger to be plugged into a power source to take
advantage of this.
For best performance, keep charging headset when
not in use.
TIPS
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
HEADSET CONTROLS
Volume Up & Microphone
Mute
Volume Down
Multifunction Button
(MFB) & Indicator Lights
Volume Increase: Quickly press and release the Volume
Up/Mute button. Repeat until desired volume is attained.
Volume Decrease: Quickly press and release the Volume Down
button. Repeat until desired volume is attained.
Microphone Mute/Un-Mute: Hold down the Volume Up/ Mute
button for 2 seconds until you hear a beep. A mute reminder
beep will be heard every 10 seconds. Repeat to un-mute.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
ON / STANDBY / OFF
Turn Headset On: Hold down the MFB for 2-3 seconds until
you hear 2 rising tones. The red light will flash once
every second.
Standby Mode: After the headset is turned on, it will
attempt to connect to the last device that it was paired
with, putting itself into standby mode. The headset can
also be put into standby mode with a quick press and
release of the MFB. The blue light will fl ash indicating
an active Bluetooth link.
Turn Headset Off (conserves battery power): Hold down the
MFB for 2-3 seconds until you hear 2 falling tones. A red
light will fl ash 4 times and the headset will turn off.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
PAIR HEADSET WITH THE PHONE
Keep headset & phone no less than 3 inches and no more than
3 feet apart while pairing. Keep other Bluetooth devices at
least 50 ft. away or turn them off. Note: The headset can
be paired with up to 3 different devices.
1. Turn headset off (panel 5).
2. Hold down the headset’s MFB until the red and blue
lights flash and you hear 2 rising tones, followed by 4
more tones. Important: Wait for all tones and for both
lights to flash. This may take up to 15 sec. Release
the MFB.
3. Follow the manufacturer’s instructions for putting your
cellular phone into Bluetooth discovery mode.
4. Wait 5-15 sec. while the devices discover each other.
When the phone discovers the headset, select “Pair” and
enter a passcode of 0000 when instructed. When pairing
is complete the headset’s blue light will stop fl
ashing and the phone will prompt you to ‘connect’ to
the headset. Enter “Yes” on the phone to connect to the
headset. When connected, the blue light will fl ash
indicating that the headset is in standby mode ready to
receive a call.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
MICROPHONE POSITIONING
Position microphone near corner of your mouth. Correct
positioning ensures that the noise cancellation technology
works properly. Slight adjustment of the microphone may
help to achieve optimum performance.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
MAKE A CALL / END A CALL
If you have not paired the headset and phone together yet,
you must do so (panel 6).
1. Turn on your cell phone. Be sure the Bluetooth option
is enabled on your phone (refer to your phone’s user
guide for instruction).
2. Put headset on and properly position the
microphone(panel 7). To turn headset on press MFB for
2-3 seconds. The headset will automatically attempt to
connect with the last device it was paired or connected
with. Once connected, the headset will enter standby
mode.
3. Dial the phone and make a call as usual.
4. To end call, quickly press the MFB on the headset and
release. You will hear 2 falling tones; the call will
end and the headset will enter standby mode.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Altri manuali per BlueParrott B250-XT
3
Indice
Altri manuali VXI Cuffia
VXI
VXI VoxStar Manuale utente
VXI
VXI BlueParrott TalkPro B150-GTX Manuale utente
VXI
VXI TuffSet 15 Manuale utente
VXI
VXI PARROTT TalkPro II Manuale utente
VXI
VXI TALKPRO MAX Manuale utente
VXI
VXI V100 Manuale
VXI
VXI V100 Manuale utente
VXI
VXI BlueParrott TalkPro B1000-GTX Manuale utente
VXI
VXI The Sound Choice UC ProSet Manuale utente
VXI
VXI 201403B Manuale utente
VXI
VXI BlueParrott B200 Manuale utente
VXI
VXI VoxStar UC Manuale utente
VXI
VXI TalkPro Headset Manuale utente
VXI
VXI BlueParrott B250-XTS Manuale utente
VXI
VXI BlueParrott C300-XT Scheda tecnica
VXI
VXI V100 Manuale utente
VXI
VXI Passport 10-V Manuale utente
VXI
VXI TuffSet 10-USB Monaural Manuale utente
VXI
VXI Envoy Manuale utente
VXI
VXI V175 Manuale utente
