W Box Technologies 0E-HDD1MP28 Manuale utente
Operation Guide
Issue V1.0 2017-08-17
WBOX HD 4-in-1
Analog Camera OSD
Operation Guide
V1.0
2017-08-17
About This Document
Issue V1.0 2017-08-17 i
Purpose
This document describes how to control the camera using DVR UTC, how to use the
joystick/five buttons on the camera and how to modify camera settings using the OSD
Menu.
Product Models
0E-HDD1MP28
0E-HDB1MP36
0E-HDD2MP28
0E-HDD1MP28G
0E-HDB1MP36G
0E-HDD2MP28G
0E-HDB2MP36
0E-HDDMO2812
0E-HDBMO2812
0E-HDB2MP36G
0E-HDDM2812G
0E-HDBM2812G
Contents
Issue V1.0 2017-08-17 ii
About This Document ----------------------------------------------- ------
1 OSD Main Menu ---------------------------------------------------------
1.1 Procedure ------------------------------------------------------------------------------
1.1.1 Camera Control over DVR UTC ----------------------------------------------
1.1.2 Camera Control Using Five Buttons ----------------------------------------
1.2 OSD Main Menu Interface --------------------------------------------------------
2 OSD Setting ---------------------------------------------------------------
2.1 Exposure ---------------------------------------------------------------------------------
2.2 WHITE BALANCE-----------------------------------------------------------------------
2.3 DAY/NIGHT------------------------------------------------------------------------------
2.4 VIDEO SETTING ------------------------------------------------------------------------
2.5 LANGUAGE -----------------------------------------------------------------------------
2.6 RESET --------------------------------------------------------------------------------------
2.7 SAVE-EXIT --------------------------------------------------------------------------------
2.8 EXIT ----------------------------------------------------------------------------------------
i
1
1
1
2
3
4
4
6
7
8
9
9
9
9
1 OSD Main Menu
Issue V1.0 2017-08-17 1
1 OSD Main Menu
1.1 Procedure
1.1.1 Camera Control over DVR UTC
Step 1 Connect the coaxial HD camera to the coaxial HD disk recorder. Use the DVR (PTZ)
control module to invoke the PTZ operation interface, and then select UTC. Figure 1-1 shows
the UTC operation interface.
Figure 1-1 UTC operation interface
The UTC operation interface provides four ARROW buttons and one SET button.
Step 2 Click the SET button to open the OSD main menu or end the setup.
UP
DOWN
RIGHT
LEFT
SET
1 OSD Main Menu
Issue V1.0 2017-08-17 2
1.1.1 Camera Control using the FIVE BUTTONS (joystick)
If your camera has four arrow buttons and one SET button, you can use the buttons to
operate the OSD main menu. Figure 1-2 shows the five buttons.
Figure 1-2 Five-button Layout
The buttons have the following functions:
SET: Press this button to open the OSD main menu or end setup.
UP/DOWN: Press the two buttons to select the upper or lower menu.
LEFT/RIGHT: Press the two buttons to select different modes.
Press and hold the LEFT button for 5s to switch to AHD mode for output of the
1080PAHD signal.
Press and hold the RIGHT button for 5s to switch to TVI mode for output of the 1080P
TVI signal.
Press and hold the UP button for 5s to switch to CVBS mode for output of the 960H
analog signal.
Press and hold the DOWN button for 5s to switch to CVI mode for output of the 1080P
CVI signal.
1 OSD Main Menu
Issue V1.0 2017-08-17 3
1.2 OSD Main Menu Interface
The OSD main menu interface includes AE, WB, DAY-NIGHT, VIDEO SETTING, LANGUAGE,
RESET, SAVE-EXIT and EXIT, as shown in Figure 1-3.
Figure 1-3 OSD main menu interface
2 OSD Setting
Issue V1.0 2017-08-17 4
2 OSD Setting
2.1 EXPOSURE
AE is intended to adjust image brightness by setting parameters such as aperture, shutter,
and gain. The EXPOSURE interface includes BRIGHTNESS, EXPOSURE MODE and GAIN.
Procedure
Step 1 Press the UP or DOWN button to select AE.
Step 2 Press the SET button to open the EXPOSURE interface, as shown in Figure 2-1.
Figure 2-1 EXPOSURE interface
Step 3 Press the UP or DOWN button to select BRIGHTNESS and press the LEFT or RIGHT button
to select a brightness value. The default brightness is 4 and the setting range is 1-20.
Step 4 Press the UP or DOWN button to select EXPOSURE MODE and press the LEFT or RIGHT
button to select an exposure mode. The EXPOSURE MODE includes GLOBE, GENTER, BLC and
FLC.
2 OSD Setting
Issue V1.0 2017-08-17 5
Figure 2-2 EXPOSURE interface (for BLC)
Step 5 Press the UP or DOWN button to select LV and press the LEFT or RIGHT button to select
an LV value. The default LV is 3 and the setting range is 0-8 (this step is only for BLC mode).
Step 6 Press the UP or DOWN button to select GAIN and press the LEFT or RIGHT button to
select a gain value. The default gain is 16 and the setting range is 1-16.
Step 7 Press the UP or DOWN button to select RETURN and press the SET return to the OSD
main menu interface.
Step 8 Press the UP or DOWN button to select SAVE-EXIT to save the exposure setting.
2 OSD Setting
Issue V1.0 2017-08-17 9
2.2 WHITE BALANCE
White balance is intended to reproduce the actual colors of the observed scene when the
illumination and color temperature of the target object are changed. You can set WB to ATW or
MWB.
Procedure
Step 1 Press the UP or DOWN button to select WB. Press the SET button to open the WB
interface, as shown in Figure 2-3.
Figure 2-3 WB interface
Step 2 Press the LEFT or RIGHT button to set the MODE. The options are ATW and MWB. When
MWB mode is selected, you can set white balance parameters, as shown in Figure 2-4.
Figure 2-4 MWB interface
2 OSD Setting
Issue V1.0 2017-08-17 9
1. Press the UP or DOWN button to select RGAIN, and press the LEFT or RIGHT button to
set RGAIN. The default RGAIN is 1 and the setting range is 1-16.
2. Press the UP or DOWN button to select BGAIN, and press the LEFT or RIGHT button to
set BGAIN. The default BGAIN is 1 and the setting range is 1-16.
Step 3 Press the UP or DOWN button to select RETURN, and press the SET button to return to
the OSD main menu interface.
Step 4 Press the UP or DOWN button to select SAVE-EXIT to save the WB setting.
2.3 DAY/NIGHT
You can set Day-Night to EXT, AUTO, COLOR or B/W.
Procedure
Step 1 Press the UP or DOWN button to select Day-Night. Press the SET button to open the
Day /Night interface, as shown in Figure 2-5.
Figure 2-5 DAY/NIGHT interface
Step 2 Press the LEFT or RIGHT button to set the Mode.
Step 3 Press the UP or DOWN button to select RETURN and press the SET return to the OSD
main menu interface.
Step 4 Press the UP or DOWN button to select SAVE-EXIT to save the DAY-NIGHT setting.
Questo manuale è adatto per i seguenti modelli
11
Indice
Altri manuali W Box Technologies Videocamera
