W Box Technologies 0E-19VGA Manuale utente
LED HD
COLOR MONITOR
0E-19VGA
0E-21VGAHDMI
0E-19VGA|0E-21HDMIVGA
1
Contents
Contents ............................................................................................................. 1!
Safety ................................................................................................................ 1!
Cautions.............................................................................................................. 2!
FCC RF Interference Statement .................................................................................. 3!
Features ............................................................................................................. 4!
Controls & Menu Operation ....................................................................................... 5!
Mounting Guide ....................................................................................................13!
Accessories .........................................................................................................14!
Power Indicator / Modes of Operation .........................................................................14!
Care .................................................................................................................14!
Dimensions .........................................................................................................15!
Specifications ......................................................................................................16!
Limited Warranty..................................................................................................18!
Safety
1. To use the product safely, correctly and to keep users from suffering hurt or property loss,
please observe the following safety precautions when installing, using and maintaining.
2. Please read this handbook before operating the product and keep the handbook for future
reference.
3. Notice and observe all the warnings and illustration.
4. Do not adjust, maintain or modify if you don’t have corresponding qualifications.
5. Do not open or remove the rear cover, box or cover board of the product. Please contact the
dealer or after-sales service center when needing internal checking, adjustment and
maintaining.
6. Do not place article on the product. The product might be damaged if foreign matters enter
the internal unit.
7. Do not tread or squeeze the power line, especially the plug, outlet or the place where the
cable extends out of the product.
0E-19VGA|0E-21HDMIVGA
2
8. Do not put the product in flammable or corrosive gaseous environment, which might cause fire
or damage the product. Putting the product in flammable gas can easily cause a dangerous
explosion.
9. Please cut off power or remove the connecting line immediately if there is smoking, off-odor or
abnormal noise. Contact the after-sales service center after affirming there is no more smoking
or off-flavor. Without proper maintenance, fire can occur.
10. Only qualified servicemen can maintain. If the product gets any kind of damage, such as
damage to the plug, splash or foreign matter into the facility, exposed to rain or humidity, not
able to function or dropped, please fix it immediately.
11. Do not expose the product to the rain or chemicals. If the product is moist, please dry it before
turn on the power.
12. Turn off the power when cleaning the product.
13. Installment in an unsuitable location might cause failure of the product or other accidents.
Fasten the screw of every component when installing.
14. Do not touch the fixed component inside the product, otherwise it might cause damage to
people or to the facility.
15. Be careful when maintaining inner body even if the power is cut off. Some facilities are
equipped with UPS, and they can continue to supply power that is dangerous to people after
the power is cut off.
Cautions
CAUTION TO SERVICE PERSONNEL
POWER SUPPLY CORD IS USED AS MAIN POWER DISCONNECT DEVICE
IN THIS PRODUCT. UNPLUG THIS PRODUCT FROM THE WALL OUTLET
BEFORE REMOVING THE BACK COVER AND SERVICING.
1. Please put the product in flat, stable and dry location. Avoid direct sunlight, high temperature,
humidity, dust and corrosive gases.
2. If the product is installed on the wall, please make sure the wall’s load bearing is enough. To
avoid falling and injury to persons, install according to the illustration.
3. The LCD might experience degraded performance when the temperature variation is big, which
will cause image distortion or decay of color. Wait for a moment (with power on) and the
normal performance will resume.
4. Do not block the ventilation opening. Install the product according to this handbook.
5. Do not install the product near any heat source such as radiator, heat register or stove.
0E-19VGA|0E-21HDMIVGA
3
6. Do not use unqualified connecting lines, which might cause equipment failure.
7. Do not press, stretch or heat the connecting line, which might cause damage to it.
8. Please firmly grasp the plug of the connecting line when inserting and drawing. Pulling the
connecting line emphatically might cause damage to it.
9. Cut off power and the connecting line immediately and contact the after-sales service center if
the product or the connecting line is damaged for some reason. Continuing using without
maintaining might cause smoking or off-odor.
10. Do not hang on the product, which might cause the product to fall or injure persons. Take
caution with children near the product.
11. Please cut off power for safety if not using the product for a prolonged period.
12. Do not let the connecting line get squeezed by the wall or buckle, pull or twine the connecting
line.
13. Make sure the power and the connecting line are cut off when moving the product.
14. Keep the product from collisions, which might cause equipment failure.
FCC RF Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
oReorient or relocate the receiving antenna.
oIncrease the space between the equipment and receiver.
oConnect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
oOnly a shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the
grantee or manufacturer could void the user's authority to operate such equipment.
0E-19VGA|0E-21HDMIVGA
4
Doc Compliance Notice
This digital apparatus does not exceed the Class A limit for radio noise emissions from digital
apparatus set out in the radio interference regulation of Canadian Department of Communications.
CE Compliance
This monitor complies with the basic protection requirements of the
Electromagnetic Compatibility (EMC) Directive 2004/108/EC for electrical and
electronic equipment imported into the European Union (EU):
The electromagnetic disturbance generated by the apparatus does not exceed the
level specified in the harmonized EMC Standards for this type of apparatus. It has a level of
immunity to the electromagnetic disturbance to be expected in its intended use, and should
operate without unacceptable degradation of its specified performance.
Features
•Ultrathin and lightweight.
•High contrast ratio and high luminance. Greatly enhances layering and detail presentation.
•Automatic elimination of ghosting, protecting the LCD panel for long-term use.
•Rapid response, no trailing.
•High reliability and excellent expansion capability.
•Multilevel menu display function.
•External power supply, low energy consumption, long service life.
•Auto image adjustment function in VGA state.
High performance LCD panels utilizing a top ranking video processing chip that enhances the
display of high-definition images. Low power consumption, dust prevention, moisture protection
and shock resistance effectively lengthen the service life of the CCTV Display.
0E-19VGA|0E-21HDMIVGA
5
Controls & Menu Operation
Please connect the monitor to external devices according to the following I/O interface list, and
choose the corresponding incoming signal channel.
0E-19VGA
0E-21HDMIVGA
Main Menu
Press the menu buttons on the bottom right side of the screen which allows the main menu to be
displayed on the screen. Depending upon the model, the submenus of the main menu: Picture
menu (VGA), Picture menu (HDMI, Audio menu, OSD menu, Function menu (HDMI) and Geometry
menu (VGA).
Press the menu button to choose the submenus. The menu chosen will show a wireframe, and press
▲▼ button to move among the secondary menus of the submenu.
0E-19VGA|0E-21HDMIVGA
6
!
5"Key:! !
!!!!A!!!!!!!!!!B!!!!!!!!!!!C!!!!!!!!!!!!!D!!!!!!!!!!!!!E!
A. “Source” button
lPress the button to display all the signal channel menus.
B. ▼“Downward” button
lPress the buttons to scrolling the cursor to desired function.
lPress the buttons to decrease the value of selected function in sub OSD menu.
C. ▲“Upward” button
lPress the buttons to scrolling the cursor to desired function.
lPress the buttons to increase the value of selected function in sub OSD menu.
D. “Menu” button
lPress the button to show the OSD main menu.
lAs a confirmation key during the OSD operation.
E. “Power” button
lPress the button to turn ON or turn OFF the monitor.
0E-19VGA
On Screen Display (OSD) Menu
The OSD menu of the monitor provides various adjustments for the monitor such as color,
brightness, contrast, and volume, etc.
0E-19VGA|0E-21HDMIVGA
7
When you press the MENU button on the monitor, the OSD screen will appear. Select each of the
functions with the UP or DOWN buttons. Use the MENU button again to enter each of the function
or when you’re in the function already, use the MENU button to select the option you want to
adjust. Use the UP or DOWN buttons to adjust each option’s values. When you want to exit press
the EXIT button.
Picture Settings
This function adjusts the brightness and contrast of the LED Monitor.
0E-19VGA|0E-21HDMIVGA
8
Color Adjust
This function adjusts the overall balance of white colors in a picture in large increments. Color
temperature consists of COOL, NORMAL, WARM, and USER COLOR.
IMAGE
This function adjusts the image of the monitor.
0E-19VGA|0E-21HDMIVGA
9
Signal Source
This function selects the source of the monitor.
OSD Menu
This function allows you to change the language of the OSD and adjust the OSD options.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali W Box Technologies Monitor
W Box Technologies
W Box Technologies 0E-27LED2 Manuale utente
W Box Technologies
W Box Technologies OE-19LED Manuale utente
W Box Technologies
W Box Technologies 0E-20LED2 Manuale utente
W Box Technologies
W Box Technologies 0E-32LEDMON2 Manuale utente
W Box Technologies
W Box Technologies WBXML32RS Manuale utente
