Wansview Q5 Manuale utente
https://www.wansview.com/
Wansview Cloud APP User Manual
1080P Indoor Security Camera
Q5/Q6
Contents
Chapter 2 Install Wansview Cloud APP 02
02
02
03
Chapter 1 Camera Introduction 01
01
Chapter3 Setup Mode 04
04
06
09
10
10
11
13
15
Chapter 4 Live Feed 08
Chapter 5 Settings and Functions 09
Chapter 6 Optional Storages 16
16
17
Chapter 7 Me page 20
Chapter 8 Alexa Compatibility 21
2.1 Download app
2.2 Account Register
2.3 Sign in
3.1 Wi-Fi Setup
3.2 Wi-Fi connection by Soft-AP
5.1 Share with Family
5.2 Motion Detection
5.3 Motion Alert
5.4 RTSP
5.5 Camera Information
5.6 Advanced Settings
6.1 Memory Card Storage
6.2 Cloud Services
1.1 Indicator Light Status
Wansview Cloud APP User Manual
www.wansview.com 0
Warm note: Please make sure your router is connected to Internet.
Model Q5
Model Q6
Wansview Cloud APP User Manual
www.wansview.com 01
Photosensor
Infrared LED
Microphone
Micro SD Card Slot
Lens
Photosensor
Infrared LED
Microphone
Micro SD Card Slot
Lens
Speaker
Indicator lights
Power port
Reset button
Speaker
Indicator lights
Power port
Reset button
1.1 Indicator lights status
Camera StatusLight Status
Camera Introduction
CHAPTER 1
Red light on
Red and blue lights are flashing alternately
Blue light is flashing
Blue light is solid
Red light is flashing quickly
Camera is powered on
Waiting for connect now
Camera is connecting to Wi-Fi
Connect WIFI and Pair successfully
Reset camera to factory setting
Install Wansview Cloud APP
CHAPTER 2
2.1 Download app
Please download Wansview Cloud app from APP store/Google Play.
2.2 Account Register
Enter your email address and the password.
Pay attention that your password MUST be 8-16 characters, and include at least 3 categories of the
following: Digits,Uppercase characters, Lowercase characters, Special characters.
Read and agree the Terms of Use and Privacy Policy, then tap Next.
Open the Wansview Cloud app and click【Sign up】
Wansview Cloud APP User Manual
www.wansview.com 02
1
2
Please go to your mailbox to find a mail that includes a verification code,enter the code to finish the Sign
up.
If you cannot find the mail, please check the spam or and tap Re-send mail. Or you can contact us by
sending an email to service@wansview.com. You can also choose Phone number or Google account to
sign in.
2.3 Sign in
When using for the first time, you need to enter the email address and password of your app account to log in.
After signing in successfully, you can set a gesture login or Touch ID. (Wansview cloud app--Me page--
【Account security】--【Touch ID/Gesture login】)
Wansview Cloud APP User Manual
www.wansview.com 03
3
Setup Mode
CHAPTER 3
3.1 Wi-Fi Setup
Note: The camera can only support 2.4Ghz Wi-Fi, it doesn’t support 5Ghz Wi-Fi.
Place the camera near the router within 3 feet and power on the camera with the attached power cord.
Make your phone use the 2.4G Wi-Fi.
Tap 【Add Device】on the APP, and choose the camera model Q5 or Q6.
Check if the camera's indicator light is flashing red and blue, if yes, tap【Flashing】.
Wansview Cloud APP User Manual
www.wansview.com 04
1
2
3
Check the indicator light status. If the connection is successful, the blue light will be solid. You can
rename the camera, and start using the camera.
The Wi-Fi name will be displayed automatically, then enter the correct Wi-Fi password and tap Next.
If Wi-Fi name is not displayed, for Android phone, please go to the Phone Setting--APP Manage-
ment--Find Wansview Cloud APP--Permissions--Allow the app to get the location info.
Adjust your screen brightness to the medium,then place the camera lens about 3-8 inches in front of the
phone and make the camera scan the QR code on the phone screen.
When hearing”QR code scanning is successful”, tap Next.
Wansview Cloud APP User Manual
www.wansview.com 05
4
5
6
3.2 Wi-Fi connection by Soft-AP
Place the camera near the router within 3 feet and power on the camera with the attached power cord.
Make your phone to use the 2.4G Wi-Fi.
Tap Add Device on the APP, and choose the camera model Q5 or Q6.
Check if the camera's indicator light is flashing red and blue, if yes, tap【Flashing】.
Wansview Cloud APP User Manual
www.wansview.com 06
1
2
3
The app will ask you to choose a network. Select 2.4G Wi-Fi and enter the password. The camera will
start connect with the Wi-Fi. After the camera is online, you can rename the camera, and start using the
camera.
Click “Didn’t you hear it?” and select 【Wi-Fi connection by Soft-AP】. Use your phone camera to scan
the QR code on the camera sticker.
Check if the camera's indicator light is flashing red and blue. If yes, tap【Flashing】.
Please go to Settings--Find a Wi-Fi named WVC***** if fail to join and connect with this Wi-Fi. Then go
back to Wansview Cloud app.
4
5
6
Wansview Cloud APP User Manual
www.wansview.com 07
Live Feed
CHAPTER 4
Wansview Cloud APP User Manual
www.wansview.com 08
Select to switch the resolution from FHD to HD
Tap to see full screen of live stream
Tap this icon to enable or disable audio
Hold to talk to the camera
Tap to record video manually, and can check the local records from
Me-Local Video
Click to to snap picture to phone storage, and can check the local picture from
【Me】-【Local Photo】
User can set up Multiple view mode to view different cameras at the same time.
On multiple view mode, the video streams is applied to 480P resolution.
FHD
Altri manuali per Q5
1
Indice
Altri manuali Wansview Telecamera di sicurezza
Wansview
Wansview Q1 Manuale utente
Wansview
Wansview B4 Manuale utente
Wansview
Wansview G6 Manuale utente
Wansview
Wansview NCS601W Manuale utente
Wansview
Wansview Q5 Manuale utente
Wansview
Wansview W3 Manuale utente
Wansview
Wansview B3 Manuale utente
Wansview
Wansview W6 Manuale utente
Wansview
Wansview 703GC Manuale dell'operatore
Wansview
Wansview B3 Manuale utente
