Waring PRO JEX450 Manuale utente

JUICERATOR®
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
JEX450

CONTENTS
Important Unpacking/Repacking Instructions . . . . . . . 1–2
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Assembling Your Waring Pro®Juicerator®. . . . . . . . . . . . 7
Disassembling Your Waring Pro®Juicerator®. . . . . . . . . . 8
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Thermal Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Care and Cleaning/Troubleshooting Guide . . . . . . . . . . .11
Tips on Juicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Vegetables and their Vitamin and Mineral Content . . . . 16
Fruits and their Vitamin and Mineral Content . . . . . . . . . 17
Recipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
IMPORTANT UNPACKING
INSTRUCTIONS
Caution: The filter basket/shredder disc has sharp edges.
Handle carefully.
1. Place the box on a large, sturdy, flat surface.
2. Remove the instruction book and any other literature.
3. Put one hand on each side of the Styrofoam®inserts
and carefully lift the Styrofoam®inserts out of the box.
4. Separate Styrofoam®inserts to remove components.
5. Remove unit base, top cover, pulp container, juice cup
and pusher from Styrofoam®mold.
6. Remove top cover of juice extractor. Carefully remove
all protective shipping material.
Keep all plastic bags away from children.
1

REPACKING INSTRUCTIONS
1. Place filter basket/shredder disc inside of filter bowl.
2. Place filter bowl and juice cover onto motor housing.
Lock juice cover into place by turning left to right.
3. Insert motor housing, top cover and pulp container
into Styrofoam®insert.
4. Place food pusher and juice cup into Styrofoam®
insert.
5. Place empty Styrofoam®insert over insert holding
components.
6. Put one hand on each side of the Styrofoam®inserts
and place contents into box.
7. Close box cover.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. READ ALL INSTRUCTIONS.
2. Always use the appliance on a dry, level surface.
3. Do not push produce into the feed chute with your
fingers. Always use the food pusher provided.
4. Do not touch the small cutting blades in the base of
the stainless steel filter basket.
5. Do not leave the juice extractor unattended when in
use. Close supervision is necessary when this
appliance is being used near children. Do not allow
children to use this appliance.
6. Always make sure the juice extractor is properly and
completely assembled before operating. The unit will
not turn on unless properly assembled.
7 . Always disconnect the juice extractor from the power
outlet when not in use or when assembling.
8. Always make sure juice extractor cover is securely in
place before motor is turned on. Be sure to turn
2

switch to off position after each use for your juicer.
Make sure the motor stops completely before
dissembling.
9. Do not put your fingers or any other object into the
juicer opening while it is in operation. If food becomes
lodged in opening, use food pusher or another piece
of fruit or vegetable to push it down. When this
method is not possible turn the motor off and disas-
semble juicer to remove the remaining food.
10. Do not operate any electrical appliance with a
damaged cord or plug or after the appliance has
malfunctioned or been damaged in any manner.
If damaged, immediately stop use and call Waring
Customer Service at (800) 269-6640 for examination,
adjustment or repair.
11. Do not immerse power cord or motor base in water or
any other liquid.
12. Do not let the cord hang over the edge of the table or
counter, or touch hot surfaces or become knotted.
13. Do not place this appliance on or near a hot gas or
electric burner, or where it could touch a heated oven.
14. Always turn appliance off at the power point and
remove cord
- if the appliance is left unattended
- if not in use
- before cleaning
- before attempting to move the appliance
15. For any maintenance other than cleaning call
(800) 269-6640.
16. This appliance has a 3-prong grounded plug . To
reduce the risk of electric shock, this plug is intended
to fit into a grounded outlet only one way. If the plug
does not fit, contact a qualified electrician. Do not
attempt to modify the plug in any way.
17. To protect against risk of electrical shock do not put
motor, unit housing and power cord in water or other
liquid.
18. Unplug from outlet when not in use, before putting on
3

or taking off parts, and before cleaning.
19. Avoid contacting moving parts.
20. The use of attachments not recommended or sold by
the manufacturer may cause fire, electric shock or
injury.
21. Do not use outdoors.
22. Always make sure juicer cover is clamped securely in
place before motor is turned on. Do not unfasten
clamps while juicer is in operation.
23. Be sure to turn switch to OFF position after each use
of your juicer. Make sure the motor stops completely
before disassembling.
24. Do not use the appliance if the rotating sleeve is dam-
aged.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
GROUNDING INSTRUCTIONS
This appliance must be grounded while in use to protect
the operator from electrical shock. The appliance is
equipped with a 3-conductor cord and 3-prong grounding-
type plug to fit the proper grounding-type receptacle. The
appliance has a plug that looks like sketch A. An adapter,
sketch B, should be used for connecting sketch-A plugs to
two-prong receptacles. The grounding tab which extends
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box as shown in
sketch C using a metal screw.
4

GROUNDING METHOD
EXTENSION CORDS
Use only 3-wire extension cords which have 3-prong
grounding-type plugs and 3-pole cord connectors that
accept the plug from the appliance. Use only extension
cords which are intended for indoor use. Use only extension
cords having an electrical rating not less than the rating of
the appliance. Do not use damaged extension cords.
Examine extension cord before using and replace if dam-
aged. Do not abuse extension cord and do not yank on
any cord to disconnect. Keep cord away from heat and
sharp edges.
INTRODUCTION
Raw juices derived from fresh fruits and vegetables are
invaluable as an aid in maintaining a balanced diet.
Raw juice contains, in its most natural and complete form,
precious vitamins, minerals, bioflavonoids and enzymes.
Nutritional authorities claim that raw juice is food in one of
its most easily digestible forms.
Be sure to use your Waring Pro®Juicerator®daily, or as
often as you can manage, in the manner recommended in
this instruction manual.
Because of the cleansing and rebuilding properties
contained in juices, it is recommended that you use juices
in small amounts in the first week and then gradually
increase amounts as you can comfortably enjoy them.
We recommend that juices be taken alone, between meals,
and at room temperature – not with meals.
The Waring Pro®Juicerator ®is the result of intensive
research and engineering efforts, and we are sure you will
be delighted with its performance.
5

1
2
3
4
5
6
10
10
11
9
8
7
PARTS
1. Food Pusher
2. Extra-Wide Feed Chute
3. Top Cover
4. Stainless Steel
Filter Basket and
Shredder Disc
5. Filter Bowl
6. Motor Housing
7. Pulp Container
10-Cup Capacity
(dishwasher-safe)
8. Pulp Container Lip
9. Lo/Off/High Toggle
Switch
10. Juice Collector Cup
and Cover
11. Froth/foam separator
(ensures juice froth is
separated from juice
when poured into glass)
12. Rest Button (not
shown) located under
unit base
6
12

Assembling Your Waring Pro®Juicerator®
NOTE: The juice extractor will not operate
until the pulp container is locked into
position. To assemble this unit the
following steps must be followed in the
order given.
Step 1
Place filter bowl on top of the motor housing.
Step 2
Place the stainless steel filter basket
inside the center of the filter bowl. Make
sure it snaps into hub. Press firmly on the
stainless rim of the filter basket. To avoid
injury do not press on shredder disk.
Note: Before switching the juicer on,
ensure the stainless steel filter basket is
pushed down firmly until it clicks into
place.
Step 3
Place the Juicerator®top cover over the
top of the motor housing by positioning
it over the center of the filter and lower
into position.
Step 4
Lock juice cover into place by turning
left to right (counterclockwise) until cover
locks into position. Follow instructional
arrows on top cover.
Step 5
Slide the food pusher down the feed chute
by aligning the flat area of the food pusher
with the flat area of the feed chute. Food pusher is
marked with an arrow for easy lineup. Continue to
slide the food pusher down the feed chute.
7
Step 1 and 2
Step 3
Step 4
Step 5

Step 6
Place the pulp container into position by grasping the lip
of the pulp container with one hand and tilting the pulp
container slightly. Place under top cover until it locks
into position.
Step 7
Place the juice collector cup provided under the spout of
the filter bowl.
Disassembling Your Waring Pro®Juicerator®
Step 1
Turn the Waring Pro Juicerator ®toggle switch to the off
position. Remove the plug from the power outlet.
Step 2
Remove juice cup.
Step 3
Remove the pulp container by tilting slightly to remove from
base.
Step 4
Remove the lid by twisting right to left (clockwise) as far as
it will go to disengage then lift up cover.
Step 5
Remove stainless steel filter basket and filter bowl at the
same time by holding onto the filter bowl spout and pulp
container lip while putting pressure with your thumbs on the
top rim of housing and pulling gently in an upward motion.
For best cleaning results, we recommend cleaning the filter
basket with an Oxo®cleaning brush.
THE STAINLESS STEEL FILTER BASKET
CONTAINS SMALL SHARP BLADES TO CUT
AND PROCESS FRUITS AND VEGETABLES.
DO NOT TOUCH BLADES WHEN HANDLING
THE FILTER BASKET.
8

Step 6
To remove the stainless steel filter basket, lift up from
juicer bowl.
Caution: Sharp blades
OPERATION
Note: The juice extractor will not operate until the pulp
container is locked into position. See page 8.
Step 1
Wash your selection of fruit and vegetables for juicing.
Note: Most fruit and vegetables such as apples, carrots
and cucumbers will not need to be cut to size as they will
fit into the feed chute whole.
Step 2
Ensure that the Juicerator ®is correctly assembled and
that the juice collector cup is placed under the spout
while juicing.
Step 3
Plug the power cord into a power outlet. For softer fruits
and vegetables such as melons, spinach, pears, etc., use
the low setting. For harder fruits and vegetables such as
carrots, beets, cabbage, etc., use the high setting.
Toggle to the low or to the high position depending on the
fruit or vegetable being processed. Toggle to the off posi-
tion when process is completed.
Step 4
With the motor running place food down the feed chute.
Using the food pusher, gently guide food down the chute.
To extract maximum juice always push the food pusher
down slowly. Make sure flat area of food pusher is aligned
to flat area of feed chute. The food pusher is marked with
an arrow for easy lineup.
9
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Waring Spremiagrumi
























