Warmup 5iE Manuale utente
5iE
The Smartest Smart Thermostat
Installation Manual
Technical Helpline
0345 345 2288
Contents
Components.......................................... 3
Safety Information..................................4
Step 1 - Install Boiler Receiver....................7
Step 2 - Assembling the 5iE....................... 10
Step 3 - Paring and testing ....................... 12
Step 4 - Review Installation ...................... 14
Step 5 - Getting Started .......................... 16
Step 6 - Download ‘MyHeating’ app............. 17
Step 7 - Registration............................... 18
Step 8 - General information..................... 19
Step 9 - Troubleshooting .......................... 20
Technical Specications........................... 21
User Guide
Installation Guide
5iE
Components
Power BaseThermostat Face
Stand
Boiler Receiver
Power Adapter with 1m
USB Cable
Pack Contents
3
IMPORTANT INFORMATION: Installation of the Boiler Receiver
should only be carried out by a qualied electrician. It requires a
permanent 230V supply.
The Boiler Receiver should be connected to the central heating
fused spur or circuit breaker in accordance with current wiring
regulations such that there is a single point of isolation for all
interconnected devices.
Isolate the central heating system from the mains supply
throughout the installation process.
Ensure that multi stranded wires are fully inserted into the
terminals and secured tightly. Any loose strands should be trimmed
as they could cause a short-circuit.
Safety Information
5iE
Safety Information
4
This product uses mains voltage electricity
and work should only be carried out by a
qualied electrician. Electrical installation to
be in accordance with latest edition of BS7671
Wiring Regulations and appropriate Statutory
Regulations.
!
Before making any permanent xtures Warmup recommends
progressing through to ‘Step 3 - Paring and Testing’ upon
identifying preferred locations for the Boiler Receiver and Power
Base. This will ensure the wireless connection is not subject to
range or interference issues once installed.
The Boiler Receiver should be installed within the Boiler’s vicinity.
Large metal objects such as the boiler, hot water cylinder or
radiators, should be at least 300mm away from the Boiler
Receiver and not directly between it and the Power Base.
Loosen both screws at
the bottom of the Boiler
Receiver and remove
the backplate.
Fix the backplate to the
wall using xing screws
provided.
Make sure to avoid cables or pipes
which may be concealed in the wall
!
Mounting/positioning
5iE
Step 1 - Install Boiler Receiver
NOTE: For alternative installation congurations, see online at www.warmupsmart.com/installation
5
12
Wiring Connections
5iE
Step 1 - Install Boiler Receiver
6
NOTE: For alternative installation congurations, see online at www.warmupsmart.com/installation
1 2 3 4
Once the Boiler Receiver has been wired correctly, reattach the
front panel to the back plate and tighten both screws to secure.
Restore power to the
boiler. The LED on the
Boiler Receiver will ash
RED slowly to indicate it
has power and is
not paired.
Test the manual control
function (Page 8) to
ensure the boiler is being
switched by the Boiler
Receiver.
Re-assemble
5iE
Step 1 - Install Boiler Receiver
7
12
LED Colour LED Status Meaning
N/A Not lit Paired
Green Lit constantly Relay on
Red Flashing slowly Not paired
Red Flashing quickly Relay o
Red Lit constantly Communication Lost
Relay on
LED Status
5iE
Step 1 - Install Boiler Receiver
LED
8
The Warmup 5iE has been designed to still provide heating control
should communication between the Power Base and Boiler
Receiver be interrupted.
With the Power Base and Boiler Receiver paired and the
Thermostat face calling for heat, the relay will be activated and
the Boiler Receiver will show a constant green LED indication. If
the communication between the Power Base and Boiler receiver
is lost, the green LED and relay will remain active on for the
Boiler Receiver for a period of up to 30 minutes.
If communication has not been restored before the 30 minutes has
expired, the Boiler Receiver will indicate a communications fault
by displaying a red LED ashing quickly.
To activate the Boiler Receiver manually (switch heating on), or
whilst communication has been lost, press the power button on
the Boiler Receiver once. The LED indicator with change from
ashing quickly red to constant red.
To de-activate the Boiler Receiver manually (switch heating o),
or whilst communication has been lost, press the power button
on the Boiler Receiver once. The LED indicator with change from
constant red to ashing quickly red.
Once communication has been restored, the Boiler Receiver
indication will change back to constant green when the
Thermostat face is calling for heat and the Boiler Receiver is
activated.
Manual Control
5iE
Step 1 - Install Boiler Receiver
9
Remove the 5iE from its
packaging. Loosen both
closing screws located
at the bottom of the
Thermostat Face, and
remove from the Power
Base.
Clip the Power Base
onto the stand. Thread
the USB Cable through
the stand and connect
to the Power Base.
Connect the Power
Adaptor to a wall socket.
For optimal performance the Thermostat should be located
in an area with good ventilation. It should not be beside a
drafty window/door, in direct sunlight or above another heat
generating device (e.g. radiator or TV).
Stand Mounted
5iE
Step 2 - Assembling the 5iE
10
1 2
NOTE: For alternative installation congurations, see online at www.warmupsmart.com/installation
Components required:
· Thermostat Face
· Power Base
· Stand
· Power Adapter with 1m Cable
Altri manuali per 5iE
2
Indice
Altri manuali Warmup Termostato
Warmup
Warmup WA-TSTAT-V Manuale utente
Warmup
Warmup konekt WIRELESS KW-UKETRV Manuale utente
Warmup
Warmup Terra RSW Series Manuale utente
Warmup
Warmup 6iE Manuale utente
Warmup
Warmup UDG Manuale utente
Warmup
Warmup tempo Manuale utente
Warmup
Warmup WA-TSTAT-V Manuale utente
Warmup
Warmup 3IE Manuale utente
Warmup
Warmup WP-207-F Manuale utente
Warmup
Warmup One Manuale utente
Warmup
Warmup Luxury 2 LUXY2D44 Manuale utente
Warmup
Warmup 6iE Manuale utente
Warmup
Warmup Portrait 4iE Istruzioni per l'installazione
Warmup
Warmup 4iE WiFi Manuale utente
Warmup
Warmup WA-XSTAT-V Manuale utente
Warmup
Warmup WT01 Manuale utente
Warmup
Warmup 6iE Manuale utente
Warmup
Warmup OTN-1991-WA Manuale utente
Warmup
Warmup Element Manuale utente
Warmup
Warmup PT502 Manuale
