Watts Vision Wired WT-D03 Manuale utente

wattswater.eu

W T-D03

Wired digital room thermostat

Vision®Wired

Installation manual

User guide

Gebruikershandleiding

Manuel d’utilisation

Benutzerhandbuch

Manuale d’uso

Guía de Usuario

Brugervejledning

Bruksanvisning

Käyttöopas

Руководство по эксплуатации

Instrukcja użytkownika

TABLE OF CONTENT

General information............................................................................................3

1. Presentation.................................................................................................... 4

2. Box contents ...................................................................................................4

3. First Installation..............................................................................................5

4. Product description......................................................................................6

4.1 LCD logo description

5. Mode selection................................................................................................7

5.1 Change temperature setting

5.1.1 Boost/Timer mode

5.1.2 Comfort mode

5.1.3 Reduced / ECO mode

5.1.4 Anti-freeze mode

5.1.5 OFF mode

5.1.6 Reversible mode

6. Functions highlights ....................................................................................10

6.1 Reversible mode

6.2 Opened windows detection

6.3 Keyboard locking

6.4 PIN code

6.5 Heating and cooling indications

6.6 LED indication

7. User parameters............................................................................................12

7.1 Access to user parameter menu

7.2 User parameter description

8. Installer parameters.....................................................................................16

9. Temperature sensors used for regulation ..........................................20

9.1 Temperature sensors

9.2 Description of regulation configurations

10. Troubleshooting & solution ...................................................................21

11. Maintenance.................................................................................................22

12. Technical characteristics .......................................................................22

13. Standards......................................................................................................23

14. Dimensions & weight................................................................................23

GENERAL INFORMATION

Safety warnings and operating

instructions

• This product should be installed

preferably by a qualified professional.

Subject to observation of the above

terms, the manufacturer shall

assume the liability for the equipment

as provided by legal stipulations.

• All instructions in this Installation &

Operation manual should be observed

when working with the thermostat.

Failures due to improper installation,

improper use or poor maintenance

are voiding manufacturer liability.

• Any attempt to repair voids the

responsibility and the obligation

to guarantee and replacement

from the manufacturer.

• Do not cover the thermostat for accurate

measurement of ambient

temperature. Therefore the

sensor must never be hidden

behind thick curtains, furniture,

etc… Alternatively, a remote

sensor should be used.

• 2012/19/EU (WEEE directive):

Products marked with this symbol cannot

be disposed of as unsorted municipal

waste in the European Union. For proper

recycling, return this product to your local

supplier upon the purchase of equivalent

new equipment, or dispose of it at

designated collection points. For more

information see: www.recyclethis.info

https://wattswater.eu/wt-d03/

Application

• The thermostat have been designed for

use in residential rooms, office spac-

es and industrial facilities. Verify that

the installation complies with exist-

ing regulations before operation to

ensure proper use of the installation.

Please refer to “Quick Installation

Guide” for thermostat installation

1. Presentation

• Thermostat compatible with Vision®

Wired system.

• 3 sensitive touch buttons.

• 4 wires connectivity.

• Different temperature modes setting.

• Anti freeze function.

• Configurable Hysteresis or PWM regu-

lation.

• Pin Code & screws lock for public area.

• EEPROM non volatile memory.

• 2 parameter menus: User and Installer.

In option

External sensor with several possibilities of

regulation (Floor, remote, combined...).

2. Box contents

WATTS Vision®thermostat Fixing screws

Back cover

1 x 1 x

1 x

3. First Installation

Please refer to the Quick Installation Guide.

When thermostat is started, it launch is

initialization procedure:

All segment of the LCD screen are displayed

The led is blinking white

LCD screen display the software version

Thermostat initialize its internal configuration

according to H&C signal

Lout

L (24V to 230V)

WATTS Controller WFC only

Heat or cool signal

Clock signal (Neutral)

4.1 LCD logo description

1. Icon showing current operating mode

of thermostat with left to right:

Thermostat is in master configuration

when logo mode is with frame .

Thermostat is in slave configuration

when logo is without the frame .

Boost/timer mode

Comfort mode in heating mode

Reduced / ECO mode

Frost protection mode

Off mode when “reversible” mode is

activated

2. Open window funct ion

3. Displaying of reduced clock and heat-

ing & cooling order:

-order is applied to heating system

-order of reduced set point mode

-order of cooling configuration

-order of stop

2 3 5

4. Product description

4. Measured temperature/tempera-

ture set point/remaining time for boost

mode

5. Locked keyboard:

6. Parameter menu number:

7. Parameter menu:

8. Indication of heating & cooling

demand

9. Type of measured data & sensor used

for system regulation:

-Humidity measurement & control

-External temperture sensor

-Internal temperature sensor

-Ambient temperature sensor

-Floor temperature sensor

10. Temperature units or or

measurement of humidity rate

Minus button or

down/left button for

menu navigation.

Plus button or up/

right button for

menu navigation.

Validation of temperature set point setting or accessing

to parameter menu or displaying measured

temperature/ temperature set point.

5. Mode selection

Press any key to wake-up the thermostat and activates the back- light.

Hold key for 2 second to access to menu for selection of mode.

Press or permits to change navigate in different mode.

If “basic navigation” is activated, navigation

menu will be:

If “reversible mode” is activated (see para-

graph 5.6 “Reversible mode” for more

details), navigation menu will be:

Menu for mode selection

Boost, comfort, reduced, antifreeze,

or stand-by menus

Automatic selection

of current mode,

(no applicable for

Boost/timer mode and

reversible mode)

Selection of mode Parameter menu

No user action

after 5 s

2 seconds

5 seconds

5.1 Change temperature setting

Wake-up the thermostat by pressing any key.

Press or , to change the temperature set point (digits starts to blink).

By pressing validation key , temperature set point value is validated.

5.1.1 Boost/Timer mode

In mode boost, set point temperature is applied during a selected time.

After this time, thermostat will return to former mode.

You can first adjust, the desired setting temperature with or , press validation key

, to validate, default value 24°C.

In a second time, you can adjust the du- ration in hours “H” if below 24H, then in day “d”.

With automatic H&C switching configuration, boost/timer mode can’t be selected.

If configuration system is changed by H&C signal, boost/timer mode will be stopped.

Thermostat will return to the previous selected mode.

Default value: “no” (0 minute)

Value range: 1h to 23 hours (step of 1 hour) and 1 day to 44 days (step 1 day).

5.1.2 Comfort mode

In this mode, comfort temperature set point will be followed all the time.

This mode can’t be selected if thermostat is a “slave” product and H&C signal sends

reduced information.

5.1.3 Reduced / ECO mode

In this mode, reduced temperature set point will be followed all the time.

This set point corresponds to comfort set point reduced by an offset (see paragraph 7.2

“User parameter description”).

Reduced/ECO mode is available if if thermostat is in master configuration;

If H&C signal is in ECO mode and the thermostat is configured in slave, the thermostat is

set automaticaly in ECO configuration

Note: In cooling mode, reduced mode acts like the OFF mode (system is stopped, NC

actuators are closed).

Thermostat is in master configuration when logo mode is .

Thermostat is in slave configuration when logo is without the frame .

Important notes:

- With “Floor Limit” regulation, Reduced/ ECO mode couldn’t work properly if “Low limit”

value is too high;

- If system configuration is automatic H&C switching and thermostat is system master,

user can’t set derogation.

- If configuration system is changed by H&C signal, setpoint derogation will be stopped.

5.1.4 Anti-freeze mode

Use this mode if you want to protect your installation against freezing. (default value 7°C).

Remark: in cooling mode, Anti-freeze mode acts like the OFF mode (system is stopped).

If “floor limit” regulation is set by user/ installer, selecting anti-freeze mode stops “floor

limit regulation”.

Antifreeze temperature setpoint is applied when opened window is detected.

5.1.5 OFF mode

Use this mode if you need to switch off your installation.

Be Careful: In this mode your installation can freeze.

- With off mode, “floor limit” regulation is stopped.

5.1.6 Reversible mode

This mode allow to switch between the heating and cooling system, the changeover can

be managed by the thermostat in Master mode (manual or automatic) displayed in Slave

mode (H&C signal at the thermostat input).

6. Functions Highlights

6.1 Reversible mode

Reversible menu access

Enter user parameter 07, use keys and , to select operating mode of the ther-

mostat:

Pressing key confirms the selection and switches to comfort mode.

A user inactivity of some seconds confirms cur- rent selection and returns to old

selected mode.

By pressing key, temperature set point value is validated.

Once the reversible mode has been selected, the change of mode is made as follows:

Press 2s on to access the menu mode selection menu. Then go down below the

OFF mode until the 4 blank icons are displayed:

Select with then select the «Hot» heating mode or «Cld cooling mode using

and keys.

Pressing the key for 1s confirms the mode selection.

User inactivity of a few seconds keeps the thermostat in the previous mode.

Back to previous mode Navigation menu Comfort or Eco mode

automatic

return

Reversible menu

Heating mode Cooling mode Auto H&C mode

1 second Short push

- Hot : Heating regulation mode

- CLd : Cooling regulation mode

- rEv: activation of reversible mode in menu

- Aut : automatic Heat/Cool mode.

Indice

Lingue:

Altri manuali Watts Termostato

Watts

Watts SunStat Dial Manuale utente

Watts

Watts Vision Wireless BT-A03 RF Manuale utente

Watts

Watts FloorStat 500650-120CS Manuale utente

Watts

Watts WS-C321 Series Manuale utente

Watts

Watts Tekmar WiFi Thermostat 561 Manuale utente

Watts

Watts BT-A RF Manuale utente

Watts

Watts Tekmar 563 Manuale utente

Watts

Watts RCL-HC Manuale utente

Watts

Watts Radiant 519 Manuale utente

Watts

Watts Tekmar 563 Manuale utente

Watts

Watts BT DPRF-01 Manuale utente

Watts

Watts WTC-ES Manuale utente

Watts

Watts MILUX RF Manuale utente

Watts

Watts Tekmar WiFi Thermostat 561 Manuale utente

Watts

Watts BT-DPRF-02 Manuale utente

Watts

Watts SunTouch Sunstat ConnectPlus Manuale utente

Watts

Watts Wattstemp 740 Manuale utente

Watts

Watts MILUX Manuale utente

Watts

Watts tekmar 518 Manuale utente

Watts

Watts Tekmar WiFi Thermostat 561 Manuale utente

Watts

Watts BT-TH02 RF Manuale utente

Watts

Watts BT-DRF-02 Manuale utente

Watts

Watts Vision BT-D03 RF Manuale utente

Watts

Watts Vision BT-D03 RF Manuale utente

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Honeywell

Honeywell CM721 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

Honeywell

Honeywell RLV4305 Manuale utente

Honeywell

Honeywell Prestige 2.0 THX9421 Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente