Waver WAC52N Manuale utente
1
WAC52N | WAC52N+
WAC52G | WAC52G+
QUICK START GUIDE
READ CAREFULLY BEFORE USING THE DEVICE
2
Your satisfaction is our top priority.
Propose a feature that will be useful to be
added on Waver SmartOne in the upcoming
software updates at features@wavertech.eu
Thank you
for choosing our product!
Package Contents
1. Waver®SmartOne Router
2. Ethernet Cable Cat5e
3. AC-DC 24 Volt Power Adapter
4. Quick Start Guide
Requirements
• OS: Windows Vista, Windows 7 or newer, Linux, Mac OS X
or Android
• Web Browser: Chrome (Recommended), Mozilla Firefox
or Apple Safari
• Broadband Internet Connection (Ethernet)
CONTENTS
- Safety Information 4
- Hardware Overview 4
- Hardware Installation 5
- Device Management 7
- Firmware Update & Reset 23
- Multilingual Instructions 24
- Warranty and Returns 27
- Declaration of Conformity 29
- Technical Specications 32
• Read this manual thoroughly before using
Waver SmartOne
• To ensure proper use of the device, make sure
to read “Safety Information” page
• After reading, keep it in a readily accessible
place for future reference
4
Safety Information
- Use only the supplied Power Adapter. Connection to a different
power source may result in improper operation, damage or pose to
re hazard.
- Do not cover ventilation holes at the bottom. This product must be
operated on a at surface far from any heater or heating vent.
- Avoid direct irradiation of any strong light (such as sunlight)
- Keep at least 5 cm of clear space around the device
- Operating Temperature: - 20 - 60°C
- Operating Humidity: 10-90 % RH, Non-condensing
- Do not disassemble the product, or make repairs yourself. You run
the risk of electric shock and voiding the warranty.
- Avoid water, moisture and wet locations.
- (N - Series Only) When using Power over Ethernet 24V Port to pow-
er another device, use properly wired CAT5e or upper category and
make sure the equipment connected at this port does not exceed the
500mA rating of power consumption (!)
WARNING! Any users with implantable cardiac pace-
makers should have this product apart the pacemaker
by 30cm or longer. The pacemakers may be inuenced
by radio waves radiated from this product.
Hardware Overview
1
2
3
4
5
7
6
5
1. Power Led
2. Internet Port Led
3. 2.4GHz Wireless Interface Led
4. 5GHz Wireless Interface Led
5. Guest Ethernet Port Led
6. RGB Side Led
7. Logo Led
8. DC Power Jack
9. ON/OFF Switch
10. Reset to Factory Button
11. 2.4GHz Interface Button
12. 5GHz Interface Button
13. Internet Ethernet Port
14. LAN Ethernet Ports
15. Guest Ethernet Port
(N Series only - with PoE Out 24V)
8 9 10 11 12 13 14 15
Hardware Installation
To install the Waver SmartOne router, perform the following
steps:
1. Connect Ethernet cable from you DSL/Cable modem to
the INTERNET Port of Waver SmartOne Router.
2. Connect the DC Power Adapter to the router and to a
power outlet.
3. Turn on router by pressing the ON/OFF switch to ON position.
6
a. During the boot process (it takes about 1 minute
and 30 seconds to boot up)
b. During Reboot process
c. During Factory Reset process
d. During Firmware update process
NEVER DISCONNECT POWER OR TURN OFF THE DEVICE
IMPORTANT
- Turning off the device or disconnecting power source during
the above processes, can corrupt ash image and can make
the device unbootable!
132
The boot process will start. After a while the power LED
will light up.
7
Device can be managed via any web browser. Access to the
web interface is available from LAN Ports, Local WiFi Inter-
faces (local network) and Internet Port.
Web Management tools
1. Administration Interface
Default access:
http://192.168.10.1
Username: admin
Password: waver
Device Management
- To turn off the device, make sure boot process has nished
(Power, Logo and side RGB Leds are ON).
- Always push the ON/OFF switch to OFF position before
unplugging the DC Adapter.
8
2. User manager Interface
3. Discount Coupon Code manager
User Manager “admin” password: waver
Default access: http://192.168.10.1/userman/
(same account with administration interface)
User Manager “manager” password: password
Default access: http://192.168.10.1/userman/
(limited access account for accessing User Manager)
Discount Code Manager password: password
Default access: http://192.168.10.1/coupons/
To access this panel, you are going to need a unique
customization key. This key is being generated separately
for each device.
4. Customization Panel (Whitelabeling)
The main administration interface. Networking, guest ses-
sion, captive portal settings, customization and management
for the local device. General system settings and statistics
are also available here.
1. Administration Interface
1. To login to the the Administration interface connect with
an Ethernet cable to a LAN port or wirelessly to a Local WiFi
interface.
2. Launch your Web browser and type http://192.168.10.1 in
the address eld.
Press enter (PC) or return (Mac).
Note: Your computer needs to be on the 192.168.10.x
subnet. If you have DHCP Client enabled on your network
adapter, it will receive an IP Address automatically. If not,
you will need to set a static IP address in the 192.168.10.2 -
192.168.10.254 range.
10
3. Enter“admin” as username and “waver” as password,
select the proper region and time zone (correct time zone
is very important for database synchronization and other
critical device functions). Read carefully the end user license
agreement. If you agree with all the terms you can check the
“I agree the terms and conditions” checkbox and click on the
“Login button”.
4. The MAIN page of conguration interface will appear.
You are logged in and you can congure your Waver
SmartOne router.
An overview on the administration interface
MAIN: Shows general guest user data statistics,
device information, interface throughput and con-
nectivity status.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Waver Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza