WaveSplitter WST-POT002 Manuale utente
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Model No. WST-POT002
HDMI 9x9 Seamless Matrix with Video Wall ＆Multiviewer
Safety Instruction
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Introduction
This model connects 9 HDMI video sources to any of 9 HDMI displays. It supports Matrix, Video wall and Multiview mode,
including seamless switching and has various control methods. It is a perfect solution for projects that requires multiple HDMI
sources and multiple HDMI displays such as control centers, home theater or conference room, etc.
Key Feature
9 x HDMI inputs, 9 x HDMI outputs.
Supports resolutions up to 4K@30Hz.
Supports HDCP1.4 / 2.2.
Supports seamless switching.
Supports Matrix mode, Video wall mode, Multiview mode.
Multiple Control Methods –via pushbuttons, remote control, RS232, TCP/IP.
Supports 1U rackmount.
Package Content
9x9 Matrix x 1 | Remote Control x 1 | 24V/4A Multi-Country Power adapter x 1 | Table mount brackets with screws x 2
Panel Description
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Remote Control Description
1. Power on/off.
2. Mute button.
3. previous source and next source.
4. Enter the seamless matrix mode(red).
5. Enter the video wall mode(green).
6. Enter the multi-viewer mode(blue).
7. Enter the mirror viewer mode(yellow).
8. MENU button: To enter the main menu interface or return to the previous menu interface.
9. All button: choose all Output port.
10. ▲▼◄►：Moves the highlight to select a displayed.
OK：Enters the selected item.
11. Display and mask the OSD menu.
12. Same as the menu button.
13. Select the input sources under video matrix mode.
14. Preset setting.
15. Output 1 display input 1, Output 2 display input 2.
Output 3 display input 3, Output 4 display input 4.
Output 5 display input 5, Output 6 display input 6.
Output 7 display input 7, Output 8 display input 8.
Output 9 display input 9.
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Specification
Interface
Inputs
HDMI Type-A Female x 9
USB Micro-B Female x 1 (For firmware update only)
Outputs
HDMI Type-A Female x 9
Control
RS-232 Female x 1
RJ-45 Female x 1
IR x 1
Transmission
Output Resolutions
3840x2160@30Hz / 2560x1440@60Hz / 1920x1200@60Hz / 1920x1080P@60Hz / 1920x1080i@60Hz /
1360x768@60Hz / 1280x720@60Hz
Supported Audio format
PCM / Dolby5.1 / Dolby 7.1 / DTS5.1 Digital Audio / DTS7.1 Digital Audio
Communication and Control
Seamless Switching
Supported
HDCP
HDCP 1.4 & HDCP 2.2
IR
38KHz
Power
Power Supply
24V/4A
Power Consumption
50W
Environment
Operating Temperature
0˚C～40˚C
Storage Temperature
-10˚C～60˚C
Product Structure
Housing Material
Metal
W x H X D
273.7 x 482.6 x 44mm
Weight
4 KG
Country of Origin
China
Certification
Safety & Emission
CE / FCC / RoHS / REACH
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Panel control
Video switch operation
The signal switch includes 9 switching channels, which can be configured as input/output according to the requirements, forming
a matrix of 1x9 - 9x1, which can switch to any input signal to 1 output or all output.
The specific operation is as follow:
❶Switch Output 1 to Input 7
Operation: Press the Output area’s number “1”+ Press the Input area’s number “7” to complete the switch.
❷Switch Output 1,6,8 to Input 9
Operation: Press the Output area’s number:“1”,“6”,“8”+ Press the Input area’s number “9” to complete the switch.
❸Switch All Outputs to Input 5
Operation: Long press any number at Output area + Press the Input area’s number “5” to complete the switch.
❹Process Input 3 as video wall mode
Operation: Long press the Input area’s number “3” to complete the switch.
Video Setting
The video interface has ten sub-menus: Output 1-9 and ALL.
After selecting the “Output X”, there will have 7 sub-menus.
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Video Switch:
Switch any output to any input or switch all output to the same input.
❶Choose “Video” in the menu and press “OK”.
❷Press “UP” and “DOWN” to select Output 1 to 10, then press “OK”.
❸Choose the Input signal by using “UP” and “ DOWN” under “Source” section, then press “OK” to complete the
switching.
Video On/Off control:
Output resolution Selecting:
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
The output resolutions are 4K, 1080P, 720P, 2560x1440, 1920x1200, 1360x768, and AUTO (AUTO is the resolution supported by the
automatic identification of the back-end TV).
Default setting is AUTO.
Offset:
Selecting offset for any or all output’s video (Offset is applicable to the video wall mode only)
The specific operation is as follows:
❶Under Video wall mode, choose “Video” and press “OK” button in MENU.
❷Select the output that you want to adjust, then press “OK”.
❸Select “Offset” section, press “OK”.
❹Select “X” or “Y” to adjust the Video wall.
Note: “X”,“Y” have 301 sub-terms, MIN:0, MAX:6000.
Stretch setting
Adjust one or All output’s video screen size.
Start from ( 0,0 ) End for ( 6000, 6000). Adjusting and cropping requires to set Start and End.
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Start（0,0）
END（6000,6000）
For example, Output 1 image size set to 1/4 at the TOP LEFT corner.
❶Choose “Video” in the menu and press “OK”.
❷Press “UP” and “DOWN” to select Output1, then press “OK”.
❸Select “X”or “Y”, press “OK”.
❹Select “Stretch” to set Start X:0; Start Y: 0; End X: 3000; End Y: 3000. Then press “OK”
Note: There are 61 sub-items in each coordinate, minimum is 0 and maximum is 6000. The interval of each value is 100. When
selected, the bottom color will turn white. When selected, the default is upper left Start (0,0), lower right End (6000,6000), midpoint
(3000,3000).
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Rotate:
You can choose one or all the outputs for 180-degrees rotation.
Mode Setting:
Seamless Matrix
Seamless switching all the video.
Video Wall Mode
There are 20 preset layout in the Mode.
2x3 U means 2x3 Video wall on the Upper side.
2x2 LD means 2x2 Video wall is on the Left Down side.
Copyright © 2020 Wavesplitter AV Technology |Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com
OPERATION MANUAL
Video Wall Layout
Multi-Viewer Mode
There are 8 presets layout in the Mode.
Indice
Altri manuali WaveSplitter Commutatore a matrice
