Webasto SmarTemp Control fx Manuale utente
SmarTemp Control fx
(Timer Programming Functionality)
SmarTemp fx Overview
29.08.2018 Webasto Presentation 2
Instant heat button
Select button
Rotary knob
Status indicator light(s)
Heater on
Run time
Manual Operation
29.08.2018 3
Webasto Presentation
This is the main screen of the
SmarTemp Control fx. If it shows
“Manual” on the screen no timers
are set to run. The heater can be
started by pressing the “Webasto”
button
Press to start heater
Menu Operation
29.08.2018 4
Webasto Presentation
Menu feature:
Pressing the “Select” button
will get you into the menu
area of the SmarTemp fx. This
is where you can set the
different timer settings and the
run time duration just as an
example.
Select button
Rotate knob to move
through the menu
Mode Selection
29.08.2018 5
Webasto Presentation
Mode:
There are two different modes,
Manual andAuto.
Manual: the heater will only start
when the “Webasto” button is
pressed.
Auto: All set timers will run as
programmed throughout the
week.
Timer Programming
29.08.2018 6
Webasto Presentation
Timer Programming:
The SmarTemp fx allows you to have up
to 4 preset programs per day for the 7
days of the week.
Rotate knob until the “timer” feature is
highlighted and then press the select
button the screen shown on this slide will
appear.
selection
Once you are in the timer feature there will be a
selection square that appear. When you rotate
the knob it will scroll through the days of the week
first and then into the timer for each day. While
scrolling through the days you can press the
select button to get down to the timer for that day
that you want. T1 –T4
29.08.2018 7
Webasto Presentation
Setting a timer:
When you pick the day and timer number
that you want press the select button and
the time and duration screen will appear.
The time can be set for any timer during
that day.
The duration can be between 10 –120
minutes in 10 minute increments only.
Repeat these steps for all timers to be
set. T1-T4, Sunday thru Saturday
Time and duration screen
Timer Programming
29.08.2018 8
Webasto Presentation
Timer Programming
Turning a timer off:
Rotate the knob and use the select
button to pick the timer you want to turn
off.
Once you have the time and duration
screen open for the timer, by pressing the
select button, rotate the knob on the
duration until “OFF” is displayed for the
duration. Press the select button and the
check that was in that timer position will
go away.
Time and duration screen
29.08.2018 Webasto Presentation 9
Timer Skip Function
Skip feature:
To use the skip feature rotate the knob
until you get to the timer selection that
you want to skip. Once on that timer,
press the select button and an “S” will
appear in place of the check mark.
The skip feature will only skip the
selected time once.After that time has
passed the “S” will return to a check
mark.
Altri manuali per SmarTemp Control fx
1
Indice
Altri manuali Webasto Timer
Webasto
Webasto 1531 Manuale utente
Webasto
Webasto BlueHeat 1533 Manuale utente
Webasto
Webasto BlueHeat 1533 Manuale utente
Webasto
Webasto Thermo Series Manuale utente
Webasto
Webasto SmartControl Manuale utente
Webasto
Webasto 1531 Guida di riferimento
Webasto
Webasto 1529 Manuale utente
Webasto
Webasto 533 Manuale utente
