9SHB MPE850 Rev 1.2 | 404753 |
Handling of fuel, engine oil and
coolant
Operating materials pose a health risk.
►Always read the manufacturer's instructions.
►Always wash your hands prior to eating, smoking and using the
toilet as well as at the end of the working shift when working with
operating materials.
Operating materials are hazardous to the environment.
►Never allow operating materials to escape into the groundwater,
water courses or sewage system. Always dispose of operating
materials according to applicable national regulations.
Danger of slipping on spilled fluids.
►Always use a filler neck or funnel when filling components with
operating materials.
►Always clean up any spilled operating materials immediately.
Engine exhaust gases contain carbon monoxide (CO). Inhalation of
carbon monoxide can deprive the body of oxygen and result in organ
damage or even death by asphyxiation.
►When operating the engine in enclosed spaces, use exhaust hoses
to direct the engine exhaust gases into the open.
Engine exhaust gases
Some service tasks require disconnection of the engine from the power
supply. Starting the engine inadvertently may endanger the safety of
personnel.
Read the vehicle manufacturer‘s documentation for more information.
►Disconnect the engine from the power supply when requested.
Engine power supply
Fuel is highly flammable. Vapors may ignite and cause an explosion.
►Do not smoke in the vicinity of the engine and do not allow naked
flames or sparks near the engine or the fuel system.
►Never fill with fuel while the engine is running.
►Do not start the engine if there is a smell of fuel or you suspect that
fuel is leaking. Have a workshop authorized by Weber Motor or the
portable fire pump manufacturer inspect the engine immediately.
►Fuel on hot surfaces can cause fires.
►Do not extinguish with water. In the event of a fire, use foam, dry
chemical or carbon dioxide extinguishers.
Fuel
2Safety
2.2 Important safety messages
