Weber Rescue Systems S 50 Manuale utente
E
S 50, S 220-54, S 270, C 100-31, S 33-14, S 140-26 LIGHT,
SPS 270 MK2, SPS 360 MK2, SPS 370 MK2, SPS 400 MK2, SPS480 MK2, SPS 270 H,
HANDVARIO RIT, RSX 105, RSX 160, RSX 165-65, RSX 180-80, RSX 175, RSX 185 ALL NINE,
RSX 200-107, RSU 180 PLUS, RSU 210 PLUS,
RSC 170, RSC 170 PLUS, RSC 190, RSC 190 PLUS, RSC 200, RSC F7
Operang instrucons
Hydraulic rescue equipment
CUTTERS
COMBI TOOLS
8142610
www.weber-rescue.com
Content
1. General 4
1.1 Informaon on the operang instrucons 4
1.2 Explanaon of symbols 5
1.3 Limitaon of liability 6
1.4 Copyright 6
1.5 Warranty provisions 7
1.6 Customer Service 7
2. Safety 8
2.1 Intended use 8
2.2 Operator responsibility 10
2.3 Operang personnel 11
2.4 Personal protecve equipment 12
2.5 Parcular hazards 13
2.6 Safety devices 15
2.7 How to respond in the event of danger or accidents 16
2.8 Signage 17
3 Technical data 18
3.1 Cuers 18
3.2 Combi tools 22
3.3 Operang condions 25
3.4 Type plate 25
4 Structure and funcon 26
4.1 Overview 26
4.2 Brief descripon 26
4.3 Hydraulic supply 27
4.4 Equipment connecons 29
4.5 Use of the control handle 31
4.6 Replacing the spreader ps 32
4.7 Replacing blade inserts (PLUS) 33
CONTENT | 3
5. Possible applicaons 35
5.1 Safety informaon 35
5.2 Cung 35
5.3 Spreading (combi tools) 37
5.4 Pulling (combi tools) 37
5.5 Crushing (combi tools) 39
5.6 Liing (combi tools) 39
5.7 Connuous Cuts (C 100-31) 40
5.8 Liing (combi tools) 40
6. Transport, packaging and storage 41
6.1 Safety instrucons 41
6.2 Transport inspecon 41
6.3 Symbols on the packaging 42
6.4 Disposal of packaging 42
6.5 Storage 42
7. Installaon and commissioning 43
7.1 Safety informaon 43
7.2 Checking 44
7.3 Installaon 44
7.4 Shung down (end of work) 45
8. Maintenance 46
8.1 Safety instrucons 46
8.2 Upkeep and maintenance 46
8.3 Maintenance aer operaon in humidity 47
8.4 Maintenance schedule 47
9. Malfuncons 48
10. Decommissioning / Recycling 49
11. EC Declaraon of Conformity 50
12. Notes 51
1. General
1.1 Informaon on the operang instrucons
These operang instrucons provide important informaon on using SMART-FORCE appliances.
To assure safety at the workplace, always observe all safety and handling instrucons contained
in this document.
Furthermore, the local accident prevenon regulaons and general safety determinaons
applicable to the operaon site of the equipment must also be observed.
Before starng any work you must read these operang instrucons thoroughly! They are
a component of the product and must be stored in a known locaon that is accessible to
personnel at all mes.
This documentaon contains informaon about the operaon of your appliance, regardless of
which type of appliance it is. For this reason, you will also nd explanaons that do not relate
directly to your appliance.
All informaon, technical specicaons, graphics and illustraons contained in these Operang
Instrucons are based on the most up-to-date data available at the me these instrucons
were created.
In addion to thoroughly reading the operang instrucons, we also recommend that you
undergo training and instrucon in handling (possible uses, operaonal taccs, etc.) the rescue
equipment from one of our qualied trainers.
GENERAL | 5
1.2 Explanaon of symbols
Warnings
In these operang instrucons, warnings are idened by symbols.
The individual warnings are introduced by signal words expressing the degree of danger.
These warnings must be heeded to prevent accidents, injury and property damage.
DANGER!
… points out an immediately dangerous situaon which can cause death or
severe injury if it is not avoided.
WARNING!
…points out a potenally dangerous situaon which can cause death or
severe injury if it is not avoided.
CAUTION!
…points out a potenally dangerous situaon which can cause minor or
slight injury if it is not avoided.
ATTENTION!
…points out a potenally dangerous situaon which can cause property
damage if it is not avoided.
Tips and recommendaons
NOTE!
…emphasises useful ps and informaon for ecient, trouble-free
operaon.
1.3 Limitaon of liability
All informaon and instrucons in these operang instrucons were compiled under
consideraon of the applicable standards and regulaons, the current state of technology and
our long-standing knowledge and experience.
The manufacturer assumes no liability for damages due to:
• Non-observance of the operang instrucons
• Improper use
• Assigning untrained personnel
• Unauthorised modicaons
• Technical changes
• Use of impermissible replacement parts
• Use of non-original accessories
For special designs or due to technical changes, the actual scope of supply for may dier from
the explanaons and representaons described.
1.4 Copyright
All texts, illustraons, drawings and images in these operang instrucons may be used freely
without prior authorisaon.
GENERAL | 7
NOTE!
Addional informaon, images and diagrams are available on our home
page: www.weber-rescue.com.
1.5 Warranty provisions
The warranty provisions are included with the sales documentaon as a separate document.
1.6 Customer Service
Our Customer Service would be happy to provide you with technical informaon.
Germany
Service Center, Güglingen
Phone: +49 7135 71 10112
E-mail: servicecenter@weber-rescue.com
NOTE!
When contacng our Customer Service, please provide the idencaon,
type and year of manufacture of the appliance. This informaon can be
found on the type plate.
For further processing, please complete
the RMA document in full:
Austria
Service Center, Losenstein
Phone: +43 7255 6237-12473
E-mail: ATL.Servicecenter@weber-rescue.com
Internaonal
For quesons regarding spare parts, service and repair, please contact
our cered local service partners. Scan the following QR code for an
overview of our worldwide service and sales network.
2. Safety
This secon of the operang instrucons presents a comprehensive overview of all important
safety aspects for opmal protecon of the operang personnel as well as for safe, trouble-free
operaon.
Non-observance of the handling and safety instrucons presented in these Operang
Instrucons can result in serious dangers.
2.1 Intended use
The hydraulic baery tools are designed and tested exclusively for the intended applicaons
described here. All other acvies are fundamentally prohibited.
All baery tools are designed as one-man appliances and are therefore to be operated by only
one person.
Cuers S 50, S 220-54, S 270, C 100-31, S 33-14, S 140-26 LIGHT, RSX 105, RSX 160, RSX 165-65,
RSX 180-80, RSX 175, RSX 185 ALL NINE, RSX 200-107, RSU 180 PLUS, RSU 210 PLUS,
RSC 170, RSC 170 PLUS, RSC 190, RSC 190 PLUS, RSC 200, RSC F7
• The baery-powered cung appliances are used exclusively for cung doors and
roof beams, pillars and door sills, the ring and the spokes of the steering wheel.
• If possible, for cung solid material, always use the rear part of the cuer unit as it
is equipped with special edges for cung round material.
• In industrial applicaon, the appliances can also be used to cut pipes, structural
steels, proles, sheets and cables.
SAFETY | 9
Combi tools
SPS 270 MK2, SPS 360 MK2, SPS 370 MK2, SPS 400 MK2, SPS 480 MK2, SPS 270 H,
HANDVARIO RIT
• All combi tools are designed as one-man devices and therefore may be
operated by one person only.
• The devices serve exclusively for the cung of doors and roof pillars,
posts and sills, the rims and spokes of steering wheels.
• The rear cuer secon should be used whenever possible for separang
solid material as this is equipped with special round material cuers.
• In industrial applicaons the equipment can also be used for cung pipes,
construcon steel, proles, sheets and cables.
• In addion, the combi tools can be used for opening doors, liing vehicles,
pushing away vehicle parts and squeezing tubes.
• The chain set is to be used exclusively for pulling.
Accessories - chain sets
• Combi tools may only be used with the appropriate chain set and pulling device.
Pulling chains are exclusively for pulling away obstacles and loads and for enlarging
openings to free trapped persons.
WARNING!
Danger caused by improper use!
Any use other than intended use and/or other type of use of these
appliances can cause dangerous situaons!
Therefore, it is absolutely necessary to:
» Only use the appliances for the intended uses described above.
» Observe all other informaon regarding proper use of the appliances in
Chapter 5 (Possible uses).
2.2 Operator responsibility
In addion to the occupaonal safety informaon in these operang instrucons, the safety,
accident prevenon and environmental prevenon regulaons applicable to the operaon site
of the appliance must also be observed. Thereby, the following applies in parcular:
• The operator must inform himself regarding the applicable occupaonal safety
regulaons and carry out a risk assessment to idenfy addional dangers arising
from the special work condions at the operaon site of the appliance.
• The operator must clearly regulate and determine responsibility for installaon,
maintenance and cleaning.
• The operator must ensure that all persons engaged with the appliance have
completely read and understood the operang instrucons.
• Furthermore, he must train the personnel at regular intervals and inform them of
the dangers associated with handling the appliance.
The operator is also responsible for ensuring that the equipment is always in a technically
awless condion. Therefore, the following applies:
• Aer each me the equipment is used, or at least once a year, a visual inspecon of
the appliance by an instructed person is required (per DGUV guideline 305-002 or
country-specic rules).
• Every three years, or whenever a doubt is raised about the safety or reliability of the
appliance, a funcon and load test must also be carried out (per DGUV guideline
305-002 or country-specic regulaons).
NOTE!
Maintenance work can be carried out by instructed persons. Maintenance
measures and repairs may only be carried out by the appliance manufacturer,
or by specialist personnel trained by the appliance manufacturer and the
authorised service partners. Connuous training and instrucon by the
appliance manufacturer is mandatory for a valid training cercate.
Altri manuali per S 50
1
Questo manuale è adatto per i seguenti modelli
55
Indice
Altri manuali Weber Rescue Systems Taglierina
Weber Rescue Systems
Weber Rescue Systems S 50-14 Manuale utente
Weber Rescue Systems
Weber Rescue Systems S 50 Manuale utente
Weber Rescue Systems
Weber Rescue Systems SPS 270 MK2 E-FORCE3 Manuale utente
Weber Rescue Systems
Weber Rescue Systems S 270-71 Manuale utente
Weber Rescue Systems
Weber Rescue Systems SPS 270 MK2 E-FORCE 2 Manuale utente
