Weber Igrill2 Manuale utente

User Manual

Table of Contents

In the Box 3

Quick Start Instructions 3

Getting Started 4

Weber iGrill App 4

Battery Replacement 5

Powering On & Off 5

Connecting 6

Disconnecting 7

Mounting 7

Probe Use 8

Probe Wrap Use 9

Using the iGrill 2 9

Display 9

Probe Toggle Buttons 10

Proximity Sensor 11

Custom & Preset Alarms 11

Setting Up A Cook 12

Preset Alarms for Different Types of Meats 12

Creating a Custom Preset 12

Pre-Alarm Notication 13

Renaming Probes 14

Timer Tool 14

Globe Tool 14

Graph Tool 14

Problem Solving 15

Disclaimer 19

Regulations 19

In the Box

Inside your iGrill 2 box, you will nd:

• 1 iGrill 2

• 2 AA Batteries

• 2 Pro Meat Probes

• 2 Probe Wraps

• 2 Colored Probe Indicators (Yellow and Red)

• 1 Optional Magnetic Disc

• Quick Start Guide

Quick Start Instructions

1. Download the Weber iGrill App from the App Store®or Google

PlayTM Store on one of the following compatible devices:

• iPhone®(4S and later)

• iPad®(3rd generation and later)

• iPad mini™ (all generations)

• iPod touch®(5th generation and later)

• Many Android™ devices equipped with Bluetooth®4.0 and

running Android™ software version 4.3 or later

2. Enable Bluetooth®on your smart device under ‘Settings.’

3. Separate the iGrill 2 from its base by rmly holding the base with

one hand and gently pulling the iGrill 2 top upwards with the other

hand.

4. On the underside of the iGrill 2, press down and remove the battery

door. The two AA batteries that are supplied with your iGrill 2

should be inserted with their negative terminals compressing the

springs. Replace the battery door.

5. Clip the iGrill 2 top back onto its base.

6. Plug one or more probes into the probe ports of the iGrill 2.

7. Press the power button located at the bottom of the faceplate

between the < and > buttons for two seconds. The unit will display

“On”, animate and a single beep will sound, indicating that the

iGrill 2 has powered on.

8. Open the Weber iGrill App to connect to your iGrill 2. Tap on the

white iGrill logo in the black toolbar at the top of the app. Select

your iGrill 2 from the ‘Available Devices’ drop-down.

9. You are now ready to use your iGrill 2!

Getting Started

Weber iGrill App

The Weber iGrill App provides all of the functionality and customization

you will need to get the most out of your iGrill 2. The Weber iGrill App is

compatible with the following devices:

• iPhone®(4S and later)

• iPad®(3rd generation and later)

• iPad mini™ (All generations)

• iPod touch®(5th generation and later)

• Many Android™ devices equipped with Bluetooth®4.0 and running

Android™ software version 4.3 or later

You must be running iOS 7+ or Android™ version 4.3 or later on your

device to use the Weber iGrill App. Please visit the App Store®or Google

Play™ Store and search “Weber iGrill 2” to download the free Weber iGrill

App.

Once you have downloaded the app, you will have access to links

for instructional videos, step-by-step instructions and FAQs for

troubleshooting.

Battery Replacement

To replace your iGrill 2 batteries, follow these steps:

• Separate the iGrill 2 from its base by rmly holding the base with

one hand and gently pulling the iGrill 2 top upwards with the other

hand.

• On the underside of the iGrill 2, press down on the tab and remove

the battery door.

• Replace the two AA batteries with their negative terminals

compressing the springs and replace the battery door.

Battery Precautions:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon zinc) or rechargeable (ni-cad,

ni-mh, etc.) batteries.

• Dispose of spent or damaged batteries according to manufacturer

instructions and local laws.

Powering On & Off

To turn the iGrill 2 on, follow these steps:

• Press the power button located at the bottom of the faceplate

between the < and > buttons.

• The display will animate, and a single beep will be heard, indicating

that the iGrill 2 has powered on.

To turn the iGrill 2 off, follow these steps:

• Press and hold down the power button located at the bottom of the

faceplate between the < and > buttons for several seconds. The

display will show “OFF”.

• Upon releasing the power button, the iGrill 2 will turn off.

Auto Shut-Off:

• The iGrill 2 will stay powered on for ve minutes before

automatically turning off if there are no probes installed and if it is

not paired to a smart device.

• The iGrill 2 will stay powered on for eight hours before automatically

turning off if not paired to a smart device and if probes are installed.

• The iGrill 2 will stay powered on indenitely if at least one probe is

installed and if it is paired with a smart device.

Connecting

To connect your iGrill 2 to your iPhone®, iPad®, iPod touch®or Android™

device follow these steps:

• Open Settings.

• Tap Bluetooth®.

• Set Bluetooth®to On.

• While turned on, place your iGrill 2 next to your smart device and

open the Weber iGrill App. Your smart device will automatically

recognize any available iGrill products and display them in the

‘Available Devices’ drop-down. You can view the ‘Available Devices’

by tapping the white iGrill logo at the top, right-hand corner of the

app.

• Select your iGrill 2 from the ‘Available Devices.’ You will then be

prompted to accept a pairing request. Once you accept, your smart

device will pair with the iGrill 2 and you are ready to congure your

settings and start cooking!

To connect an additional iGrill 2 or other iGrill product to your iPhone®,

iPad®, iPod touch® or Android™ device, follow these steps:

• While turned on, place your iGrill 2 (or other iGrill product) next to

your smart device and open the Weber iGrill App.

• Tap on the white iGrill logo located at the top of the app to expose

the ‘Available Devices’ drop-down. Select the product you would

like to pair with from the ‘Available Devices.’ Your smart device will

display a pairing request. Once accepted, your smart device will

pair with the additional product you choose. Now you are ready to

congure your settings and start grilling!

Disconnecting

While turned on, place your iGrill 2 next to your smart device and open

the Weber iGrill App. Your smart device will automatically recognize any

available and previously connected iGrill products. You can display them

in the ‘Available Products’ drop-down by tapping the 3 lines or dots at the

top right-hand corner of the screen.

If your iGrill 2 is connected, it will be listed under ‘Connected Devices.’

If you would like to disconnect your iGrill 2, you can swipe to the left on

the product name (i.e. iGrill 2) to expose the ‘Disconnect’ option.

Tap ‘Disconnect.’

Mounting

• The base of the iGrill 2 is magnetic for convenient positioning on a

cool portion of your grill, smoker or other magnetic surfaces.

• The iGrill 2 can be taken out of its base, rotated 180° and set back

into its base for two different viewing angles.

• The iGrill 2 comes with an optional magnetic disc which has an

adhesive on one side. This allows the iGrill 2 to magnetically mount

to a non-magnetic surface. The magnetic disc has a protective cover

on its face to protect it from being scratched.

To mount your magnetic disc, please follow these below steps:

• Clean the surface thoroughly where the magnetic disc will be

adhered to ensure proper bonding.

• Remove the lm covering the adhesive on the magnetic disc.

• Adhere the magnetic disc to your desired surface.

• Let the magnetic disc bond to the surface for 6-12 hours before

mounting your iGrill 2 to the disc.

• Place your iGrill 2 on the magnetic disc.

The magnetic base is not designed to withstand

high heat and it must be placed on a cool surface.

If the surface is too hot to touch, it’s too hot for

the iGrill 2 base!

Probe Use

• Pro Meat Probes should always be inserted into the thickest, center

part of the item being cooked for an accurate temperature reading.

• When using the included Pro Meat Probes that are included with the

iGrill 2, be sure to route the probe wire where it will not be exposed

to ames or temperatures exceeding 716°F (380°C). Probes should

avoid temperatures below -58°F (-50°C).

• When using Standard Meat Probes, which are sold separately, be

sure to route the probe wire where it will not be exposed to ames

or temperatures exceeding 572°F (300°C). Probes should avoid

temperatures below -22°F (-30°C).

• The Pro Ambient Probe, also sold separately, should be clipped

between two grates inside your grill, smoker or oven. Ensure the tip

of the probe does not touch the grates. Also, be sure to route the

probe wire where it will not be exposed to ames or temperatures

exceeding 620°F (326°C), and avoid temperatures below -22°F

(-30°C).

• The included Probe Wraps included with your iGrill 2 allow for

convenient storage of your probes and are magnetic so that they

can be stored under your iGrill 2 when not in use.

The colored probe indicators are for visual identication of

the probe(s) within the app and cosmetic purposes only.

They are not designed for heat safety.

The probes should be cleaned by wiping them down with a

damp towel or sanitary wipe. The probes are not dishwasher

safe. Take precaution, making sure to not get the wiring of

the probes wet as well as the area where the probes’ wiring

meets the probe.

The probes are not waterproof and damage may result from

water exposure. Never submerge your probes in water.

Temperatures below -22°F or above 572°F (-30ºC or above

300ºC) will not display in the Weber iGrill App and will cause

the probe to disappear from connection.

Probe Wrap Use

To wrap your probe(s):

• Hold the probe wrap so that the clip segment is on the bottom left

and the logo is legible in the center of the probe wrap.

• Snap the probe into the probe wrap’s clip, ensuring that the probe’s

body follows the contour of the probe wrap and leaves a ½ inch gap

between the probe and the wire channel of the probe wrap. The tip

of the probe should be pointed downward.

• Wrap your probe’s wire clockwise around the probe wrap.

• When you reach the adapter end of the probe wire, it can be

inserted into the probe wrap’s wire channel to secure the wrapping.

Using the iGrill 2

Display

The display of the iGrill 2 contains the following:

Display

• Displays temperature of currently active probe.

• Displays “DC” for temperatures below -22°F (-30ºC).

• Displays “DH” for temperatures above 572°F (300ºC).

• Displays “OFF” during power off sequence.

• Animates during power on sequence and during reset.

Bluetooth®LED

• Blinks blue when discoverable and awaiting pairing.

• Illuminates solid blue when paired.

Probe Indicator LEDs

• Far left side LED illuminates to indicate Probe 1 temperature is

being displayed.

• Middle left side LED illuminates to indicate Probe 2 temperature is

being displayed.

• Middle right side LED illuminates to indicate Probe 3 temperature is

being displayed.

• Far right side LED illuminates to indicate Probe 4 temperature is

being displayed.

Probe Toggle Buttons

The iGrill 2 has two buttons adjacent to the power button to toggle

between probes when there is more than one probe connected.

• Pressing the < or > button will switch from the currently displayed

probe temperature (as indicated by the illuminated probe indicator

LED) to the next probe.

• Holding either the < or > button down for one second will activate

a cycle that will continuously cycle through displaying each probe’s

temperature.

Altri manuali per igrill2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Weber Griglia

Weber

Weber Summit E 470 Manuale utente

Weber

Weber SPIRIT EX 3 Series Manuale utente

Weber

Weber Platinum I 3400 LP Manuale utente

Weber

Weber 98583 Manuale utente

Weber

Weber Summit 460-LPG Manuale utente

Weber

Weber one-touch premium Manuale utente

Weber

Weber ONE-TOUCH GOLD 30792 Manuale utente

Weber

Weber Summit 38026 Manuale utente

Weber

Weber SmokeFire EPX4 Manuale utente

Weber

Weber ORIGINAL GOURMET BBQ SYSTEM Summit 400... Manuale utente

Weber

Weber Genesis E-330 Manuale utente

Weber

Weber ORIGINAL KETTLE Manuale utente

Weber

Weber Genesis Jr NG Manuale utente

Weber

Weber Summit E 470 Manuale utente

Weber

Weber 210 CLASSIC Manuale utente

Weber

Weber Skyline 3200 Manuale utente

Weber

Weber E/S-310/320 Manuale utente

Weber

Weber performer deluxe Manuale utente

Weber

Weber 55260 Manuale utente

Weber

Weber Summit 56216 Manuale utente

Weber

Weber 55556 Manuale utente

Weber

Weber SMOKEFIRE EX4 Manuale utente

Weber

Weber SUMMIT 600 Manuale utente

Weber

Weber Genesis Platinum C Manuale utente

Manuali Griglia popolari di altre marche

Orbegozo

Orbegozo GR 2300 Manuale utente

bora

bora PT11 Manuale utente

Klarstein

Klarstein 10031664 Manuale utente

Garland

Garland MWE3W Manuale utente

Char-Broil

Char-Broil 463722714 Manuale utente

Nexgrill

Nexgrill 720-0830HK Manuale utente

Kenmore

Kenmore 415.16123800 Manuale utente

Camp Chef

Camp Chef PG24CLAU Manuale utente

Tucker Barbecues

Tucker Barbecues GTR Series Istruzioni per il montaggio

Monogram

Monogram ZGG540NCP1SS Manuale utente

Equipex

Equipex Sodir Savoy Manuale utente

Gaggenau

Gaggenau VR 414 610 Manuale utente

Miele

Miele KM 408-1 Manuale utente

George Foreman

George Foreman GGR50B Manuale utente

AOG

AOG T series Manuale utente

Gorenje

Gorenje TG2000CB Manuale di istruzioni

Glen

Glen SA 3037 Manuale utente

Stalgast

Stalgast 9730100 Manuale utente

Weber igrill2 Manuale utente

Manuali Griglia popolari di altre marche