WeBoost SIGNAL 3G Manuale utente

ENGLISH FRANÇAIS

Need help? http://cellphonesignalbooster.us

Signal 3G™

ENGLISH

Need help? http://cellphonesignalbooster.us

IT IS VERY IMPORTANT

TO POWER YOUR SIGNAL

BOOSTER USING A SURGE

PROTECTED AC POWER

STRIP WITH AT LEAST A 1000

JOULE RATING.

FAILURE TO DO THIS WILL VOID YOUR WARRANTY

IN THE EVENT OF A POWER SURGE OR LIGHTNING

STRIKE.

! ! THE SIGNAL BOOSTER UNIT IS DESIGNED

FOR USE IN AN INDOOR, TEMPERATURE-

CONTROLLED ENVIRONMENT (LESS

THAN 150 DEGREES FAHRENHEIT). IT IS

NOT INTENDED FOR USE IN ATTICS OR SIMILAR

LOCATIONS SUBJECT TO TEMPERATURES IN

EXCESS OF 150°F.

Contents

Package Contents ...............................................................3

Optional Accessories ............................................................3

Before Getting Started ...........................................................3

Quick Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installing the Mounting Plate (sold seperately) .......................................4

Installation Diagram .............................................................5

Additional FAQ..................................................................5

Warnings and Recommendations ..................................................6

Signal Booster Specifications .....................................................7

Guarantee and Warranty..........................................................8

Installation Instructions for the Following weBoost Signal Booster:

Signal 3G™800/1900MHz SmarTech ®Signal Booster

Model #470009 FCC #PWO460009 IC 4726A-460009

The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.

ENGLISH

Need help? http://cellphonesignalbooster.us

Before Getting Started

Before you install your Signal 3G booster

and start enjoying improved cellular

reception, please do the following:

1. Read through all the installation

steps. This will help you know what

to expect from start to nish.

2. Watch the YouTube video

3. Familiarize yourself with all materials

in your product package. This will

allow you to know which pieces are

referenced in the instructions.

Quick Installation

You can install your Signal 3G booster

using the following steps.

NOTE: Before completing your

installation, create a “soft” installation by

putting the components of your Signal 3G

booster in place and testing the operation

before mounting equipment.

Signal 3G™Optional Kits

Optional Accessories

1. Install the Outside Antenna. Select a

location on top of the structure that

is:

• At least 12 inches from any other

antennas.

• Free of obstructions.

• At least 8 inches from any people.

The Outside Antenna must be

installed vertically on a metallic

surface.

470009

470109

Cable Ext.

951151

Power Suppy

859969

12’ Mag Antenna

311125

470209

Cable Ext.

951151

Power Suppy

859969

Mini Mag

301126

470309

Cable Ext.

951151

Power Suppy

859989

Mini Mag

301126

Mounting Plate

901138

DC Power Suppy

859910

ENGLISH

Need help? http://cellphonesignalbooster.us

Installing the (Optional)

Mounting Plate

To purchase a mounting plate

contact weBoost Sales Team

800-501-3153.

1. Remove two screws from back of

Signal Booster that correspond with

the mounting plate.

(PN #

901138)

2. Place Signal Booster on mounting

plate and reinstall the two screws

previously removed from back of

Signal Booster.

Caution: Do not remove “Void

Sticker.”

MOUNT

TO WALL

SURFACE

2. Select a location to install the Signal

Booster that is away from excessive

heat, direct sunlight, moisture and

that has proper ventilation. Do not

place the Signal Booster in an

air-tight enclosure.

3. Run the Outside Antenna cable to

the Signal Booster and attach it

to the connector labeled “Outside

Antenna.”

From Cellular

Device

Power

Adapter

From Outside

Antenna

4. An external adapter may be needed

to connect the cellular device to

the Signal Booster. The external

adapter plugs into the included

antenna extension cable and directly

into a socket on the cellular device.

Run the extension cable from the

external adapter and attach it to the

connector labeled “cell phone or

data card” on the Signal Booster.

Note: Be careful when plugging

the connector in so as not to bend

the center pins on the connectors.

Ensure all cables have a tight

connection.

5. Before powering up the Signal

Booster verify that connections

are tight. An AC surge protector is

recommended for all installations

(not included).

From Cellular

Device

Power Adapter

From Outside

Antenna

ENGLISH

Need help? http://cellphonesignalbooster.us

Power Strip Surge Protector

Power Supply

Signal 3G

Signal Booster

Cellular Modem

12” Magnet

Mount Antenna

Installation Diagram

(Figure 1)

Additional FAQ:

What hours can I contact customer support?

Customer Support can be reached from 7:00am to 6:00pm MST, by calling (800-501-3153)

How does weather affect the performance of my Outside Antenna?

Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective lter to cellular

signal. In times of heavy precipitation, you may see less performance.

What’s the difference between the 800 MHz and the 1900 MHz bands? How do I know

which MHz band my cell phone uses?

The Signal 3G booster works with all major North American cellular providers. Traditionally,

800/1900MHz are associated with voice and 3G data; while 700MHz and 1700/2100MHz are

associated with 4G data.

Carrier Frequency Use

ENGLISH

Need help? http://cellphonesignalbooster.us

Warnings and Recommendations

WARNING: Verify that both the Outside Antenna and the adapter extension cable are connected to the Signal

Booster before powering up the Signal Booster.

WARNING: Use only the power supply provided in this package. Use of a non-Wilson Electronics products may

damage your equipment.

RF SAFETY WARNING: Any antenna used with this device must be located at least 8 inches from all persons.

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have

your provider’s consent. Most wireless providers consent to the use of signal boosters. Some

providers may not consent to the use of this device on their network. If you are unsure, contact

your provider.

You MUST operate this device with approved antennas and cables as specified by the

manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.

You MUST cease operating this device immediately if requested by the FCC or a licensed

wireless service provider.

WARNING. E911 location information may not be provided or may be inaccurate for calls served

by using this device.

This is a CONSUMER device.

This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Wilson Electronics could void the authority to operate this equipment.

Mobile Antennas

Mini-Mag

• 301126 w/ 12.5 RG174

cable- SMA

12” Mag Mount w/ 12.5’ RG174

• 311125

• 311128

• 314202

• 311703

Trucker antenna w/10.5’ RG58

• 311101

• 311701

Trucker antenna w/13.5’ RG58

• 311119

• 311133

NMO Antenna’s w/ RG174

Kit 311104-17410

• 800/1900 NMO antenna

• 10’ RG174 cable

Kit 311112-17410

• 800/1900 NMO antenna

• 10’ RG174 cable

Kit 314203-17410

• 800/900/1900 NMO antenna

• 10’ RG174 cable

Marine antenna w/ 10’ RG58

Kit 311130-5810

• Marine Antenna

• 10’ RG58 cable

Glass Mount w/14’ RG58 cable

• 311102

• 311114 ( Mini Glass Mount)

NMO Antenna’s w/ RG58

Kit 311104-5810

• 800/1900 NMO antenna

• 10’ RG58 cable

Kit 311112-5810

• 800/1900 NMO antenna

• 10’ RG58 cable

Kit 314203-5810

• 800/900/1900 NMO antenna

• 10’ RG58 cable

301152 Slim Low Profile w/ 10’ RG174

311106 Low Profile w/ 10’ RG58

Outside Fixed Antennas

50 Ohm Outside Antenna Kits

Kit 314453-5825

• 50 Ohm Pole Mount Panel Antenna

• 25’ RG58 Cable

Kit 314411-5825

• 50 Ohm Wide Band Directional

• 25’ RG58 Cable

Kit 301111-5850

• Yagi Directional Antenna

• 50’ RG58 Cable

Kit 311129-5840

• 800 MHz Yagi Directional

• 40’ RG58 Cable

Kit 311203-5820

• Omni-Directional antenna

• 20’ RG58 Cable

Kit 311124-5830

• 1900 MHz Yagi Antenna

• 30’ RG58 Cable

Kit 314411-40075

• 50 Ohm Wide Band Directional

• 75’ LMR400 Cable

Kit 311203-40020

• Omni-Directional antenna

• 20’ LMR400 Cable

Kit 301111-400170

• Yagi Directional w/ N-Female

• 170’ LMR400

Kit 311124-400100

• 1900 MHz Yagi Directional

• 100’ LMR400 Cable

Kit 311129-400100

• 800 MHz Yagi Antenna

• 100’ LMR400 Cable

Kit 314453-40075

• 50 Ohm Pole Mount Panel Antenna

• 75’ LMR400 Cable

75 Ohm Outside Antenna Kits

Kit 301111-0675

• Yagi Directional Antenna

• 75’ RG6 Cable

• N-Male to F-Female adapter

Kit 311201-0620

• Omni Directional w/ F-Female

• 20’ RG6 Cable

Kit 311129-0660

• 800 MHz Yagi Directional

• 60’ RG6 Cable

• N-Male to F-Female adapter

Kit 311124-0650

• 1900 MHz Yagi Directional

• 50’ RG6 Cable

• N-Male to F-Female adapter

Kit 314473-0640

• 75 Ohm Pole Mount Panel Antenna

• 40’ RG6 Cable

Kit 314475-0630

• 75 Ohm Wide Band Directional

• 30’ RG6 Cable

Kit 311141-0620

• 75 Ohm Grey Brick Antenna

• 20’ RG6 Cable

Kit 301111-11140

• Yagi Directional Antenna

• 140’ RG11 Cable

• N-Male to F-Female adapter

Kit 311201-1120

• Omni Directional w/ F-Female

• 20’ RG11 Cable

Kit 311129-11110

• 800 MHz Yagi Directional

• 110’ RG11 Cable

• N-Male to F-Female adapter

Kit 311124-1180

• 1900 MHz Yagi Directional

• 80’ RG11 Cable

• N-Male to F-Female adapter

Kit 314473-1175

• 75 Ohm Pole Mount Panel Antenna

• 75’ RG11 Cable

Kit 314475-1175

• 75 Ohm Wide Band Directional

• 75’ RG11 Cable

Kit 311141-1120

• 75 Ohm Grey Brick Antenna

• 20’ RG11 Cable

ENGLISH

Need help? http://cellphonesignalbooster.us

Signal Booster Specifications

Signal 3G™

Model Number 460009

Connectors SMA-Female

Antenna Impedance 50 Ohms

Frequency 824-894 MHz & 1850-1995 MHz

Passband Gain (nominal) 800 MHz

13.4

1900 MHz

12.3

20 dB Bandwidth (MHz)

800 MHz 1900 MHz

Typical

Maximum

41.7

43.3

84.1

88.9

Power output for single cell phone (dBm)

800 MHz 1900 MHz

Uplink

Downlink

23.8

-6.05

22.3

-6.3

Power output for multiple received channels

(Uplink) dBm

No. Tones

800 MHz 1900 MHz

224.1 23.2

320.5 19.6

418.0 17.1

516.1 15.2

614.5 13.6

Power output for multiple received channels

(Downlink) dBm

No. Tones

800 MHz 1900 MHz

2-3.2 -4.7

3-6.7 -8.2

4-9.2 -10.7

5-11.1 -12.7

6-12.7 -14.2

Noise Figure (typical downlink/uplink) 4 dB (nominal)

Isolation > 60 dB

Power Requirements 5V DC, 1A

The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating

would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power

reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory

reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of

authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is

too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a

detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts,

any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal

Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.

ENGLISH

2-Year Warranty

weBoost Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty

cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.

Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of

purchase and a Returned Material Authorization (RMA) number supplied by weBoost. weBoost shall, at its option,

either repair or replace the product. weBoost will pay for delivery of the repaired or replaced product back to the original

consumer if located within the continental U.S.

This warranty does not apply to any Signal Boosters determined by weBoost to have been subjected to misuse, abuse,

neglect, or mishandling that alters or damages physical or electronic properties.

Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty.

RMA numbers may be obtained by contacting Customer Support at 800-501-3153.

Disclaimer:The information provided by weBoost is believed to be complete and accurate. However, no responsibility

is assumed by weBoost for any business or personal losses arising from its use, or for any infringements of

patents or other rights of third parties that may result from its use.

Vous avez

besoin d’aide? http://cellphonesignalbooster.us

FRANÇAIS

Signal 3G™

FRANÇAIS

Vous avez

besoin d’aide? http://cellphonesignalbooster.us

Table des matières

Contenu de l’emballage ..........................................................3

Accessoires optionnels ..........................................................3

Avant de commencer ............................................................3

Installation rapide ...............................................................3

Installation de la plaque de montage (vendue séparément) .............................4

Diagramme d’installation .........................................................5

Faits supplémentaires (FAQ) ......................................................5

Avertissements et recommandations ...............................................6

Caractéristiques de l’amplificateur de signal .........................................7

Garanties ..................................................................Verso

Instructions d’installation pour l’amplificateur de signal weBoost suivant:

Amplificateur de Signal 3G™800/1900MHz SmarTech ®

Modèle n° 470009 N° de la FCC PWO460009 IC 4726A-460009

Le terme «IC» placé avant le numéro de certification radio signifie uniquement que les spécifications techniques

d’Industrie Canada ont été respectées.

IL EST TRÈS IMPORTANT

DE BRANCHER VOTRE

AMPLIFICATEUR À L’AIDE

D’UNE MULTIPRISE C.A.

PROTÉGÉE CONTRE

LES SURTENSIONS D’AU

MOINS 1000 JOULES.

SI VOUS NE RESPECTEZ PAS CETTE INSTRUCTION,

VOTRE GARANTIE EST ANNULÉE DANS LE CAS D’UNE

SURTENSION OU D’UN COUP DE FOUDRE.

L’AMPLIFICATEUR DE SIGNAL EST CONÇU

POUR UN ENVIRONNEMENT INTÉRIEUR

ÀTEMPÉRATURE CONTROLÉE (MOINS DE 150

DEGRÉS FAHRENHEIT). IL N’EST PAS CONÇU

POUR UNE UTLISATION DANS UN GRENIER OU TOUT AUTRE

EMPLACEMENT SIMILAIRE SUJET À DES TEMPÉRATURES DE

PLUS DE 150°F.

! !

Altri manuali per SIGNAL 3G

Indice

Lingue:

Altri manuali weBoost Ripetitore

weBoost

weBoost Home 4G Manuale utente

Manuali Ripetitore popolari di altre marche

Gigaset

Gigaset 108 Manuale utente

Ace TECHNOLOGY

Ace TECHNOLOGY USR-1900A Manuale utente

Kenwood

Kenwood TKR-750-850 Manuale elenco delle parti

Asus

Asus RP-AC51 Manuale utente

Exibel

Exibel HRP0101 Manuale utente

Kidde

Kidde Vega Manuale utente

Telcosat

Telcosat RBB 850 Guida all'installazione

York

York Universal LINC485 Manuale utente

MIKOM

MIKOM MRx01B Power Series Manuale utente

Simrad

Simrad RD 301 Manuale utente

Tait

Tait TB7304 Manuale utente

R-tron

R-tron RSN-CDMA-37-C Manuale utente

Inventronics

Inventronics DALI REPEATER SO Manuale utente

XFP

XFP 16 Manuale utente

Andrew

Andrew MRx18 Manuale utente

COMBA

COMBA RXA3748 Manuale utente

ADRF

ADRF SDR-ICS-43 Manuale utente

Teltonika

Teltonika WRP100 Manuale utente

weBoost SIGNAL 3G Manuale utente

Manuali Ripetitore popolari di altre marche