WEG ENC-02 Guida rapida
ENC1 and ENC2 Board
Tarjeta ENC1 y ENC2
Cartão ENC1 e ENC2
Installation, Conguration Guía de Instalación, Guia de Instalação,
and Operation Guide Conguración y Operación Conguração e Operação
EXPANSION BOARD ENC-01/ENC-02
Table of Contents English
l. Safety Instructions............................................................ 1
ll. General Information ....................................................... 1
lll. Package Contents.......................................................... 1
1. Module CFW11-ENC-01/CFW11-ENC-02 Installation .... 1
2. Configurations............................................................... 3
3. Encoder Incremental....................................................... 4
3.1. Encoder Assembly ................................................... 4
3.2. Encoder Technical Specifications............................... 5
4. Operation ..................................................................... 6
TARJETA DE EXPANSIÓN ENC-01/ENC-02
Índice Español
l. Instrucciones de Seguridad............................................... 7
ll. Informaciones Generales ................................................ 7
lll. Contenido del Embalaje................................................. 7
1. Instalación del Módulo CFW11-ENC-01/CFW11-ENC-02 7
2. Configuraciones ............................................................ 9
3. Encoder Incremental..................................................... 10
3.1. Montaje del Encoder ............................................. 10
3.2. Especificaciones Técnicas para el Encoder .............. 11
4. Puesta en Marcha ........................................................ 12
CARTÃO DE EXPANSÃO ENC-01/ENC-02
Índice Português
l. Instruções de Segurança ................................................ 13
ll. Informações Gerais ...................................................... 13
lll. Conteúdo da Embalagem ............................................ 13
1. Instalação do Módulo CFW11-ENC-01/CFW11-ENC-0213
2. Configurações ............................................................. 15
3. Encoder Incremental..................................................... 16
3.1. Montagem do Encoder.......................................... 16
3.2. Especificações Técnicas para o Encoder.................. 17
4. Colocação em Funcionamento .....................................18
1
English
Installation, Configuration and Operation Guide
EXPANSION BOARD ENC-01/ENC-02
l. SAFETY INSTRUCTIONS
All the safety procedures described in the CFW11 Inverter Manual must be
followed.
ll. GENERAL INFORMATION
This guide gives instructions for installing, configuration and operation of the
optional ENC-01 and ENC-02 modules. These modules are targeted to the reading
of the CFW11 encoder signals.
The ENC-01 module has an additional output for repeating the encoder sig-
nals.
lll. PACKAGE CONTENTS
- Accessory module in anti-static package.
- Installation, configuration and operation guide.
- Grounding screw.
1. MODULE CFW11-ENC-01/ CFW11-ENC-02 INSTALLATION
The optional board modules are installed directly into slots on the CFW11 control
module.
Figure 1: Identification of slots of the optional modules
- slot 1: white
- slot 2: yellow
- slot 3: green
2
English
To fix the encoder and prepare the connection cable of the electric signals, follow
the instructions of item 3.
For the correct installation of modules ENC-01 and ENC-02, follow the steps
below:
Step 1: With the inverter de-energized, remove the front cover of the CFW11
(figure 2);
Step 2: Carefully plug-in the module into slot 2 (figure 3(a));
Step 3: Place and tighten the grounding screw and fixture of the module
(figure 3(b));
Step 4: Set the module switches as shown in table 1;
Step 5: Connect the encoder cables to connector XC4 of modules ENC-01 and
ENC-02.
Figure 2: Removal of front cover
Figure 3: Installation of optional module into slot
bc
a
ab
3
English
Figure 4 : Characteristics and signals of cables and connectors
2. CONFIGURATIONS
Table 1: Module ENC-01 and ENC-02 configuration switches
Switches Function Position Operation Observations
S1:1
External source voltage for
the encoder repeater circuit
(ENC-01-only)
ON 5V (By-pass internal
voltage regulator) -
OFF (*) 7V to 24V (internal vol-
tage regulator active) -
S1:2 Not connected internally - - -
S2:1 Failure detection on signals
Z, Z (F079)
ON (*) Failure detection
enable -
OFF Failure detection
disabled
Turn OFF when
the encoder does
not have signals Z
and Z
S2:2
Failure detection on
encoder signals A, A, B, B,
Z, Z (F079)
ON Failure detection
disabled
Does not depend
on the S2:1 status
OFF (*) Failure detection
enable -
S3:1 Encoder voltage supply ON 5Vdc Set according to
the voltage of the
encoder used
OFF (*) 12Vdc
S3:2 Not connected internally - - -
S1:1 and
S1:2
S2:1 and
S2:2
S3:1 and
S3:2
(*) Factory standard.
4
English
3. ENCODER INCREMENTAL
The signal specifications for the inputs of the encoder incremental of modules
ENC-01 and ENC-02, are effective for Dynapar encoder model HS35B. To use
another type of encoder check if the pins and signal sequence are equivalent to the
shown model.
3.1. Encoder Assembly
It is important to follow some recommendations during assembly of the encoder
on the motor:
1) The encoder must be coupled directly to the shaft of the motor without torsional
flexibility;
2) Both the shaft and metal frame of the encoder must be electrically isolated
from the motor (minimum distance 3mm);
3) Flexible and high quality coupling must be used to avoid mechanic oscillation
or backlash.
Figures 5 and 6 show encoder assembly of self-ventilated and forced ventilated
motors.
Encoder protection cover:
Figure 5: Dynapar HS35B encoder assembly on
self-ventilated motor
Figure 6: Dynapar HS35B encoder assembly on
forced ventilated motor
Encoder protection cover Flexible steel suporte/rack and encoder
fixture components
Encoder HS35B
Encoder protection cover
fixture on the motor deflector
Encoder HS35B
5
English
3.2 Encoder Technical Specifications
Table 2: Encoder technical specifications
Characteristics Specifications
Power supply 5V or 12V
Channels 2 channels in quadrature (90º) + zero pulses with complementary outputs
(differentials)
Signals A, A, B, B, Z and Z
Available for 2 channels: A, A, B, B (figure 8)
Output circuit Linedrive or Push-pull type = maximum 12V level
Isolation Electronic circuit isolated from the encoder frame
Pulses Recommended number of pulses per rotation =1024ppr
Frequency Maximum allowed = 100kHz
Table 3: Technical specifications of the encoder cable
Characteristics Specifications
Type of cable Balanced cable shield (for differential signals operation)
Connection The cable shield must be connected to ground through devices on control shield plate
(see figure 7)
Distance ≥ 25cm of other wiring
Isolation Use metal conduit
Length Maximum = 100m
XC4
1
2 Input
Input
Input
Input
Input
Input
3
4
5
6
7 Ground -
8
Output
Output
Output
Output
Output
Output
9
10
11
12
13
14
15
16
17
ENC-01
only
18
Directional Inputs:
Common mode
maximum
voltage: 7V
Maximum differential
voltage: 24V
Vectorial input power
supply of encoder
repeater circuit
5V or 7V to 15V,
(S1:1) current
capacity 150mA
Repeated encoder
signals
10mA Maximum
control
Encoder power
supply
5V or 12V (S3:1)
Protected by short
circuit
Maximum current
500mA
1
2
3
4
5
6
7
8
9
11
Connector Encoder
A A
H
B B
I
C Z
J
D +VE
F COM
E NC
G Ground
A
B
Z
Power
Supply 7 or 24V -
5V or +
Z
B
A
Red
Blue
Yellow
Green
Gray
Pink
White
Brown
Cable
A
B
Z
Shield
I/O
Output
Input
A
B
Z
+V
COM
A
B
Z
+V1
COM1
A
B
Z
A
B
Z
NC NC
Figure 7: Cable and connector characteristics and signals
6
English
Diagram to signals
Figure 8: Standard phase of the encoder signals
4. OPERATION
Step 1: After installing the module, energize the inverter;
Step 2: Check if the module has been correctly identified by the control:
P0027=xxC2;
Step 3: Program parameter P0202 (Type of control) = 4 (Vectorial with encoder).
This way, the inverter will operate with speed feedback for the encoder in-
cremental. The number of pulses per encoder rotation must be programmed
in P0405.
NOTE!
See the CFW11 Manual for more details on the Vectorial Control.
Signal
A
A
B
B
Time
7
Español
Guía de Instalación, Configuración y Operación
TARJETA DE EXPANSIÓN ENC-01/ENC-02
l. INSTRUCCIONES DE SEGURIDAD
Todos los procedimientos de seguridad descriptos en el manual del convertidor
CFW11 deben ser seguidos.
ll. INFORMACIONES GENERALES
Este guía orienta la instalación, la configuración y la puesta en marcha de los
módulos opcionales ENC-01 y ENC-02. Estos módulos son dedicados a la lectura
de la señales de encoder para el CFW11.
El módulo ENC-01 posee adicionalmente una salida para repetición de las
señales de encoder.
lll. CONTENIDO DEL EMBALAJE
- Módulo de accesorio en embalaje antiestático.
- Guía de instalación, de configuración y de operación.
- Tornillo de puesta a la tierra.
1. INSTALACIÓN DEL MÓDULO CFW11-ENC-01/ CFW11-ENC-02
Los módulos de tarjeta opcionales son instalados directamente en los “slots”
ubicados sobre el módulo de control del CFW11.
Figura 1: Identificación de los “slots” de los módulos opcionales
- slot 1: blanco
- slot 2: amarillo
- slot 3: verde
8
Español
Para la fijación del encoder y preparación del cable de conexión de las señales
eléctricas sigue las instrucciones del ítem 3.
Para la correcta instalación de los módulos ENC-01 y ENC-02, ejecute los pasos
que sigue:
Paso 1: Con el convertidor sin corriente, retire la tapa frontal del CFW11
(figura 2);
Paso 2: Enclave cuidadosamente el módulo en el “slot 2” (figura 3 (a));
Paso 3: Coloque y apriete el tornillo de puesta a la tierra y de fijación del módulo
(figura 3 (b));
Paso 4: Configure las llaves de los módulos, de acuerdo con la tabla 1.
Paso 5: Conecte los cables del encoder en el conector XC4 de los módulos
ENC-01 y ENC-02.
Figura 2: Remoción de la tapa frontal
Figura 3: Instalación del módulo opcional en el “slot”
bc
a
ab
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali WEG Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
