WEIBANG WBSC457LC Manuale utente

WBSC457LC

SOD CUTTER

Operator's manual

(Original instruction)

DO NOT operates this equipment until you have read and understood all enclosed Operator’s

Manual.

READ ALL the sections in this manual PRIOR to attempting to service, maintain or operate this

equipment!

775 Glenn Ave, Wheeling, IL 60090

Content

1 Pre-operation note------------------------------------------------------------------------1

2 Safety precautions------------------------------------------------------------------------2

3 Assembly-------------------------------------------------------------------------------------8

3.1 Unpacking instructions----------------------------------------------------------8

3.2 How to set up your sod cutter------------------------------------------------9

4 Features and controls r-----------------------------------------------------------------9

5 Transporting the sod cutter----------------------------------------------------------11

6 Pre-operation procedures------------------------------------------------------------12

7 Operation procedures------------------------------------------------------------------13

7.1 Starting and stopping the engine------------------------------------------13

7.2 Operating the machine to cutting sod------------------------------------14

7.3 Notes during operation--------------------------------------------------------16

8 Service and adjustment---------------------------------------------------------------17

8.1 Engine-------------------------------------------------------------------------------17

8.2 Sod cutter--------------------------------------------------------------------------17

9 Storage -------------------------------------------------------------------------------------18

10 Maintenance procedures------------------------------------------------------------19

10.1 Inspection schedule----------------------------------------------------------19

10.2 Preventative maintenance procedures---------------------------------20

10.3 General service procedures-----------------------------------------------21

10.3.1 General safety procedures-----------------------------------------21

10.3.2 Pre-maintenance-------------------------------------------------------22

10.3.3 Maintenance Contents-----------------------------------------------22

11 Trouble shooting-----------------------------------------------------------------------26

12 Warranty ---------------------------------------------------------------------------------28

DANGER: Do not operate the engine in an enclosed area. Engine exhaust

contains carbon monoxide, a deadly gas that is odorless, colorless and tasteless.

Always run engine outdoors and make sure there is adequate ventilation.

DO NOT operates this equipment until you have read and understood all the enclosed Operator’s

Manual.

READ ALL the sections in this manual PRIOR to attempting to service, maintain or operate this

equipment!

Following security identity is to remind you always pay attention to safety during operation:

Danger:

Show immediate serious results of injury or death.

Warning:

Show unsafe actions or conditions may cause serious injury, death or damage to major

equipment.

Caution:

Show unsafe action or conditions may cause injury or property damage.

Any modification unauthorized by manufacturer is prohibited. These modifications

will change the performance and reliability of this machine or cause safety hazards to

operators, and lead to the failure of warranty.

Thank you for your purchase of the WEIBANG sod cutter. This sod cutter has been designed

and manufactured to our highest quality demands for durability and performance.

WEIBANG Garden Machine Company Limited is committed to offering durable products and

quality after-market service. The WEIBANG sod cutter is warranted to be free from

manufacturer’s defects in material and workmanship for a period of one (1) year from the date of

purchase (except used for commercial purpose or hire and rental applications). This warranty will

be void if the machine has not been operated and maintained in the manner prescribed in this

Operator’s Manual. Any machine malfunctions, and/or warranty claims that arise from the

misinterpretation or the misunderstanding of the instructions and cautions discussed in this

booklet will not be eligible for warranty protection.

In order for the sod cutter to perform at its optimum capabilities, the operator must read this

manual thoroughly before using this unit. This Operator’s Manual contains important product

operation procedures, safety precautions, maintenance and troubleshooting tips as well as other

advisories. Please keep this manual nearby when operating the lift as a reference should any

questions arise.

WBSC457LC

Sod Cutter is a professional garden machine with high efficiency used for sod

transplant, which can separates the entire sod away from the planting soil from the bottom of

roots, and form a sod belt with uniform width and uniform thickness, meanwhile retain a certain

length of roots. The sod belt can be transplanted to landscaping jobsite to form the desired turf

vegetation landscape quickly. The sod thickness can be adjusted by change cutting depth

according to different varieties of sod to reduce the damage to grass roots, and the sod

transplanted is easy to survival.

The machine should not be used for any other purpose than that stated above. The

inappropriate use of any machine can cause serious damage and/or bodily harm to the

environment and operator. It is imperative that the operator of this equipment be responsible for

the operational environment of the sod cutter. Please read, understand and follow all instructions

that are provided in this manual. Please be prepared and well-informed for all specific

requirements precautions and work hazards that may and/or do exist at the jobsite.

hardened high-strength alloy steel blade equipped is very durable and cutting sod easily. Failure

to maintain the sod cutter in a proper manner will lead to decreased productivity of the tool and

hazards to the operator and bystanders. Inspect you jobsite for any debris such as rocks, wiring,

string or and other items that can become hazardous during work. Identify and mark all fixed

objects to be avoided during work, such as sprinkler heads, water valves, buried cables, or

clothes line anchors etc. Do not use the machine if it has been modified or improperly

maintained.

All jobsites are different. Please ensure that when using the WEIBANG sod cutter, all local

bylaws and codes are followed. All operators and mechanics of this machine should be trained in

general machine use and safety.

Every care and effort has been made to ascertain the accuracy and completeness of

procedures described in this document to ensure your enjoyment and satisfaction. If you have

any questions or concerns, please contact the WEIBANG’S local dealer or WEIBANG’s exclusive

national distributor.

Specifications

Model WBSC457LC

Power LONCIN G200F 4.1kW 6hp

Cutting depth(Max.) 1.8 inches 4.5 cm

Cutting width 18 inches 45cm

Cutting speed 0.9-1.1m/s

machine size LxWxH 69x29.5x37.4 inches 175x75x95cm

Net weight 387 Pound 176 Kg

Gross weitht 440 Pound 200 Kg

SAFETY REGULATIONS

1. This machine may only be operated by responsible persons, who are trained and familiar with

the operating instructions. Before starting to use this machine, read, under stand and follow all

instructions that are provided in this manual.

2． Before operating power rake, ensure that it is structurally and mechanically safe by checking

the following:

a. Are all engine controls and the clutch action functioning within acceptable tolerances?

b.Are all nuts and bolts in good working condition? Tight and keep all guards and deflectors

in place and in good working condition.

3. Before using the sod cutter on proposed jobsite, perform the following environmental checks:

a. Inspect the entire work area for unexpected buried hazards, such as boulders,

foundations, and fencing.

b. Clean work area of any litter or debris, such as wire, boards, rocks, or any other potential

hazards.

c. Know and mark the location of any and all buried utility lines or sprinkler systems. If in

doubt, always check with your local utilities provider for survey information and

assistance.

d. Check for ventilation in area. Do not operate the sod cutter or run the engine in

unventilated areas. Engine exhaust contains carbon monoxide, a deadly gas that is

odorless, colorless, and tasteless.

ALWAYS OPERATE CHIPPER/SHREDDER OUTDOORS!!

4 Always wear proper safety clothing and equipment for the job. These can and should include

eye and ear protection, gloves, dust mask and any other items that are appropriate for the job and

jobsite requirements.

●Never wear any jewelry, neck ties, or other loose or hanging items that can be caught on

any part of the machine.

●Tie back or remove any loose hair, clothing and any other potential hazards and

obstructions. Keep all hands, loose clothing, hair, jewelry and all other personal parts and

belongings away from moving parts of the machine.

●Avoid coming in contact with the muffler and other engine parts after the engine is started

and the time immediately after the machine is turned off. Machine and engine

temperatures may exceed 150°F or 66℃. Machine must be allowed to cool before

touching it or attempting to perform any maintenance!

●Do not tamper with the engine governor settings on the machine; the governor controls

the maximum safe operating speed and protects the engine and all moving parts from

damage caused by dangerously high speeds.

●Do not transport or move machine while the engine or machine is running.

5. For the safety of others and that of the operator, observe the following precautions:

●While the machine is in use, keep observers and bystanders at least 35 feet away from

the sod cutter and its immediate working environment.

●Stop operations or if anyone or anything (i.e.: humans, animals, etc.) approaches from the

front or the sides while the machine is in operation.

●If the cutting mechanism strikes any foreign object or if the machine should start making

an unusual noise or vibration, immediately shut off the engine and allow the machine to

stop. Disconnect the spark plug wire from the spark plug and take the following steps:

i. Inspect for damage.

ii. Replace or repair damaged parts.

iii. Check for and tighten any loose parts.

●Stop work and turn off the sod cutter if chipping jams the machine or causes it to labor

unnecessarily. Inspect the machine for any possible causes.

●Before attempting to clear any jams in the unit, inspecting or servicing any part of the

machine, stop the engine and remove the sparkplug wire, and make sure that all moving

parts have come to a complete stop.

●Never leave machine unattended. Shut off the engine whenever you leave the work area.

●This machine only used for cutting sod and should not be used for any other purpose.

The inappropriate use of any machine can cause serious damage and/or bodily harm to

the environment and operator.

●DO NOT, under any circumstances, operate machine if any of the following conditions

are applicable:

i. Any impairment (i.e.: medical conditions, medicinal side-effects, alcohol, drugs etc.) of

the operator.

ii. The operator has not read or understood the operator’s manual for this machine.

iii. The operator does not clearly understand the operations of the machine.

iv. The machine is in need of repair

v. The operator is inappropriately attired to operate the machine.

6. Take care of children. Tragic accidents can occur if the operator is not alert to the presence of

children. Children are often attracted to the chipper/shredder and to the operation activity. Never

assume that children will remain where you last saw them.

a. Keep children out of the working area and under the watchful care of a responsible adult.

b. Be alert and turn machine off if children enter the area.

c. Never allow children to operate the cod cutter.

Warning: Do not carry children or any other persons sitting on the machine.

7. Use extra care in handling fuels. They are flammable and vapours are explosive.

●Use only an approved container.

●Never remove fuel cap or add fuel with the engine running. Allow engine to cool before

refueling.

●Do not smoke.

●Never refuel the machine indoors.

●Never store the machine or fuel container inside where there is an open flame, such as a

water heater.

●If fuel is spilled, do not attempt to start the engine, but move the machine away from the area

of spillage before starting.

●Always replace and securely tighten fuel cap after refueling.

SAVE THESE INSTRUCTIONS!!

Special safety precautions

1. Do not remove any safety guard and other security protection facilities.

2. Do not start the machine until the gear selecting lever is set in neutral.

3. For safety reasons, when the machine is self propelled for transporting, make sure the blade

is disengaged and lift up.

4. Never leave machine unattended. Shut off the engine and shift the ignition switch to “OFF”

whenever you leave the work area.

5. For engaging blade or selecting gears, reduce the throttle and pull the clutch

handle slowly until the transmission is semi-engaged to avoid damaging

gears.

6. Do not engage the blade until the transmission is in neutral, FAILURE TO DO

SO MAY RESULT IN SERIOUS INJURY OR DEATH.

7. The cutting work should be carried in low gear, fail to do so will damage the machine and

affect cutting effect.

● DO NOT cutting sod when the machine is in high speed gear.

● DO NOT use this machine at any other circumstances except lawn.

● THIS MACHINE IS NOT DESIGNED FOR USE ON SLOPES OF MORE THAN 20% GRADE.

IF MACHINE IS USED ON EXTREME SLOPS, THE MACHINE MAY BECOME

UNBALANCED TO THE POINT OF PRESENTING THE DANGER OF ROLLING OVER.

● Keep all hands or feet and all other personal parts away from moving parts of the machine.

● Do not run this machine in unventilated areas.

● Do not manually drive the machine until the gear is disengaged.

● Do not attempt to perform any repairs, service, or diagnostics, or to transport or move the

machine until it comes to a complete stop. Disconnect cable from the sparkplug and place

where it cannot come in contact with plug.

● Do not run this machine until all guards and deflectors in place and in good working condition.

● The sod cutter is a heavy unit. DO NOT ATTEMPT TO MANUALLY LIFT ALONE!

● Do not select gears until the machine stops moving.

● After gear selecting, accelerate the throttle slowly

● Do not put down or lift up the blade until the driving system is disengaged.

Regular maintenance and parts replacement are important steps to extending the life of your

equipment and enjoying its optimum performance. When performing or conducting any

maintenance or repairs, always check that your working surroundings are safe and well-ventilated

and that the technician is familiar and comfortable with all aspects of the machine and required

procedures.

This guide aims to serve as a representational guide to the WBSC409H. Any other uses or

application beyond the scope of this document are strictly prohibited. While every attempt has

been made to maintain its accuracy，WEIBANG reserves the right to update and modify the

equipment without prior notification. Prior to undertaking to perform any maintenance or repair

procedures, please contact our Technical Support Hotline for clarification and to acquire

appropriate parts.

To order spare parts, please provide the following information:

1. Machine Make

2. Model Number

3. Machine Serial Number

4. Quantity Required of Each Part

5. Part Numbers

6. Part Descriptions.

1Contents List

Prior to setting up the WBSC409H Professional sod cutter, check that the following items are

enclosed:

Item

Quantity Check if enclosed

WBSC457LC Sod cutter

1 ____Yes ____No

WBSC457LC Handle bar with clutch handle

1 ____Yes____No

WBSC457LC Sod cutter Operator’s manual

1 ____Yes____No

Engine Operator’s manual 1 ____Yes ____No

If any of these items are missing, please contact local dealer and ask for the Service Department

at once.

DO NOT ATTEMPT ASSEMBLY OR OPERATION WITHOUT ANY OF THESE LISTED PARTS!

All WEIBANG parts are guaranteed by a thirty (30) day warranty against any manufacturer’s

defects in workmanship and material. Consult Warranty page in the Operator’s Manual for further

details on our Warranty Policy.

2 Information on Safety Decals

Below are the decals available for re-ordering to facilitate maintenance. All decals are

available for replacement except that with the serial number of the unit for each number serves as

an unique identifier for warranty and support purposes.

If you have any questions, please do not hesitate to contact your local dealer for further

assistance.

Warning

●Do not shift gears or engage blade when the machine is running with high speed.

●Shift gears or engage blade until the engine is running with idle speed and the power is

semi-engaged to avoid damaging the gearbox.

Caution

The engine exhaust from this production contains chemicals know to the state of California to

cause cancer, birth defects, or other reproductive harm. Engine produces carbon monoxide which

Is an odorless deadly poison. DO NOT OPERATE IN AN ENCLOSED AREA.

READ ALL the sections in this manual PRIOR to attempting to service, maintain or operate this

equipment.

DO NOT operate this equipment until you have read and understood all the enclosed Operator’s

Manual.

Qty Required=1PCS

PART No.XYJLP070

OPERATOR:

Qty Required=1PCS

PARTNo. L0106040Z

FUEL TANK:

Qty Required=2PCS

PARTNo. L0106080Z

SERVICE:

Qty Required=1PCS

PARTNo. L0203000

WARNING:

Carefully read these instructions and this manual in its entirety, before you attempt to operate

your new shredders.

IMPORTANT: THIS SOD CUTTER IS DELIVERED WITHOUT OIL OR PETROL IN THE

ENGINE.

Your new sod cutter has been pre-assembled at the factory, with the exception of those parts left

unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc. necessary to

complete the assembly have been attached on the machine. To assure safe and proper operation

of your sod cutter all parts and hardware you assemble must be tightened securely. Use the

correct tools needed to assure proper tightening.

I UNPACKING INSTRUCTIONS

WARNING

To prevent personal injury or property damage, do not attempt to start the engine until all

assembly steps are complete and you have read and understand the safety controls and

operating instructions in this manual.

INTRODUCTION

Please carefully follow these assembly steps to properly prepare your machine for use. We

recommend that you read this Section in it’s entirely before beginning assembly.

NOTE: All references to left, right, front and rear of the machine are determined by standing

behind the handlebars and facing the direction of forward travel.

INSPECTION AFTER DELIVERY

When unpacking the machine, inspect for shipping damage or missing parts, if you find any

damage, or if parts are missing, notify the WEIBANG Dealer who sold you the machine.

TOOLS/MATERIALS NEEDED:

Active Wrench / Motor Oil / Tire Gauge

1. UNPACKING STEPS

•Cut plastic banding. To open the box, remove top plywood panel firstly,

•Remove the handle bar with belt clutch handle.

•Remove all around wall panel.

•Remove the angle iron securing machine to wood pallet.

•Move the machine from the wood pallet.

•Check the box thoroughly and remove additional loose parts included with sod cutter.

•Remove all packing materials.

● The WBSC409H is a HEAVY machine. The net weight is 387 lbs/176kgs. DO NOT ATTEMPT

TO MANUALLY LIFT ALONE! It is recommended extremely using a crane to lift the unit.

If there is no crane for lifting, make sure that four people lifting the machine

are capable of lifting at least 100 lbs/45.36kgs individually!! NEVER ATTEMPT

TO LIFT THE MACHINE WITH ONLY ONE or TWO PERSON!!

Indice

Altri manuali WEIBANG Taglierina

WEIBANG

WEIBANG WBSC409H Manuale utente

Manuali Taglierina popolari di altre marche

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Manuale utente

Makita

Makita DCS552 Manuale utente

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Manuale utente

Makita

Makita 4112HS Manuale utente

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Manuale utente

Hitachi

Hitachi CM 4SB2 Guida alla risoluzione dei problemi

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Manuale utente

GCC Technologies

GCC Technologies AFJ-24S Manuale utente

DeWalt

DeWalt XR LI-ION DCS350N Manuale utente

Baudat

Baudat ES1 Manuale utente

Mafell

Mafell ZAF 200 Guida

Makita

Makita 4100NH Manuale utente

Formax

Formax FD 574 Manuale utente

EINHELL

EINHELL TE-MA 1500 Manuale utente

Husqvarna

Husqvarna Cut-n-Break K 760 Manuale utente

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Manuale utente

TRI tool

TRI tool 301A Manuale utente

Roller

Roller King 1 1/4 Manuale utente