WeiderPro Pro 4300 Manuale utente

• Assembly

• Adjustment

• Troubleshooting

• Part List and Drawing

Model o. 831.14622.1

Serial o.

Write the serial number in the

space above for future reference.

Serial umber Decal (under seat)

WEIGHT SYSTEM EXERCISER

Userʼs Manual

CAUTIO

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

Sears, Roebuck and Co.

Hoffman Estates, IL 60179

WAR I GDECALPLACEME T ..............................................................2

IMPORTA TPRECAUTIO S ................................................................3

BEFOREYOUBEGI ......................................................................4

PARTIDE TIFICATIO CHART ..............................................................5

ASSEMBLY ..............................................................................8

ADJUSTME T ...........................................................................25

WEIGHTRESISTA CECHART..............................................................27

CABLEDIAGRAM.........................................................................28

MAI TE A CE ..........................................................................29

EXERCISEGUIDELI ES ...................................................................30

PARTLIST ..............................................................................33

EXPLODEDDRAWI G ....................................................................34

ORDERI GREPLACEME TPARTS ..................................................BackCover

90DAYFULLWARRA TY ..........................................................BackCover

TABLE OF CO TE TS

The decal shown here has been applied to

the weight system. If the decal is missing

or illegible, call 1-877-992-5999 and

request a free replacement decal. Apply

the decal in the location shown. ote: The

decal may not be shown at actual size.

WAR I G DECAL PLACEME T

Before beginning any exercise program,

consult your physician. This is especially

important for persons over age 35 or per-

sons with pre-existing health problems.

2. Use the weight system only as described in

this manual.

3. It is the responsibility of the owner to ensure

that all users of the weight system are ade-

quately informed of all precautions.

4. The weight system is intended for home use

only. Do not use the weight system in any

commercial, rental, or institutional setting.

5. Keep the weight system indoors, away from

moisture and dust. Place the weight system

on a level surface, with a mat beneath it to

protect the floor or carpet. Make sure that

there is enough clearance around the weight

system to mount, dismount, and use the

weight system.

6. Inspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

7. Keep hands and feet away from moving

parts.

8. Keep children under age 12 and pets away

from the weight system at all times.

9. Always wear athletic shoes for foot protec-

tion while exercising.

10. Make sure that the cable remains on the pul-

leys at all times. If the cable binds as you

are exercising, stop immediately and make

sure that the cable is on the pulleys. Replace

all cables at least every two years.

11. The weight system is designed to be used

only with the included weight. Do not use

the weight system with dumbbells or any

other type of weight to increase the resist-

ance.

12. The weight system is designed to support a

maximum user weight of 300 lbs. (136 kg).

13. Always make sure that the weight pin is

inserted fully into the weight stack before

exercising.

14. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

WAR I G: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your weight system before using your weight sys-

tem. Sears assumes no responsibility for personal injury or property damage sustained by or

through the use of the weight system.

IMPORTA T PRECAUTIO S

Backrest

Curl Pad

Shroud

Weight

Backrest

Adjustment Knob

Seat Adjustment Knob

Ankle Strap

Handle

Curl Adjustment Knob

Frame

Butterfly Arm

Seat

Right Side Left Side

ote: The terms “right

side” and “left side”

are determined relative

to a person facing

away from the weight

system; they do not

correspond to right

and left on the draw-

ings in the manual.

Leg Lever

Foam Pad

Chain

Press Arm

Lat Bar

BEFORE YOU BEGI

Thank you for selecting the versatile WEIDER®PRO

4300 weight system. The weight system offers a selec-

tion of weight stations designed to develop every

major muscle group of the body. Whether your goal is

to tone your body, build dramatic muscle size and

strength, or improve your cardiovascular system, the

weight system will help you to achieve the specific

results you want.

For your benefit, read this manual carefully before

using the weight system. If you have questions after

reading this manual, please see the back cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

ASSEMBLED DIME SIO S:

Height: 6 ft. 11 in. (210 cm)

Width: 3 ft. 7 in. (109 cm)

Depth: 3 ft. 5 in. (196 cm)

M10 Locknut (77)

M8 Washer (103)

M8 Locknut

(78) M6 Washer

(114)

OM4 Washer

(104)

M4 x 12mm

Self-tapping

Screw (102)

M4 x 16mm

Self-tapping

Screw (110)

M6 x 16mm

Screw (88) M8 x 22mm

Shoulder Bolt (90)

M10 x 75mm Button Screw (118)

M10 x 20mm

Button Screw (96)

19mm

Spacer (67)

21mm Steel

Spacer (108)

56.5mm Spacer (69) 89.5mm Spacer (59)

M10 Washer (80) M10 Large Washer (105) M12 Large Washer (98)

M10 x 70mm Bolt (113)

11mm

Spacer (99)

13mm Steel

Spacer (109)

7mm

Spacer (111)

M12 Nut (112)

M6 Locknut

(107)

PART IDE TIFICATIO CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-

ing is the key number of the part, from the PART LIST in the center of this manual. ote: Some small parts

may have been preattached. If a part is missing, call 1-877-992-5999.

M6 x 32mm Screw (89)

M6 x 28mm

Bolt (94)

M6 x 60mm Button Screw (91)

M8 x 75mm Carriage Bolt (83)

M8 x 80mm Bolt (100)

M8 x 65mm Bolt (101)

M10 x 120mm Bolt (115)

M10 x 82mm Button Screw (92)

M10 x 61mm Bolt Set (116)

M8 x 69mm Shoulder Bolt (87)

M10 x 60mm Bolt (79)

M10 x 85mm Bolt (81)

M10 x 75mm Bolt (82)

M10 x 80mm Bolt (84)

M10 x 65mm Bolt (85)

M10 x 45mm Bolt (86)

M10 x 50mm Bolt (97)

M10 x 110mm Bolt (93)

M10 x 65mm Button Bolt (106)

Backrest Adjustment Knob (53)

Curl Adjustment Knob (58)

Seat Adjustment Knob (52)

The Four Stages of the Assembly Process

Frame Assembly—You will begin by assembling

the base and the uprights that form the skeleton

of the weight system.

Arm Assembly—During this stage you will

assemble the arms and the leg lever.

Cable Assembly—During this stage you will

attach the cables and pulleys that connect the

arms to the weights.

Seat Assembly—During the final stage you will

assemble the seats and the backrests.

ASSEMBLY

To make assembly easier, carefully read the

following information and instructions:

•Assembly requires two persons.

• Because of its size, the weight system should be

assembled in the location where it will be used.

Make sure that there is enough clearance to walk

around the weight system as you assemble it.

• To make assembly as easy as possible, we have

divided the assembly process into four stages.

The parts needed for each stage are found in

individual hardware kits. Place all parts of the

weight system in a cleared area and remove the

packing materials. Do not dispose of the packing.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

• For help identifying small parts, use the PART

IDE TIFICATIO CHART on pages 5 and 6.

• As you assemble the weight system, make sure

all parts are oriented as shown in the drawings.

•Tighten all parts as you assemble them, unless

instructed to do otherwise.

• Assembly requires the included hex key and

grease and the following tools (not included):

two adjustable wrenches

one rubber mallet

one standard screwdriver

one Phillips screwdriver

Assembly may be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

2. Orient the two Weight Guides (18) so that the

indicated holes are closer to the floor, and

insert the Weight Guides into the Stabilizer (3).

Attach the Stabilizer (3) and the Weight Guides

(18) to the Base (1) with two M10 x 85mm Bolts

(81), two M10 Washers (80), two 21mm Steel

Spacers (108), and two M10 Locknuts (77). Do

not tighten the Locknuts yet.

ext, attach the Weight Guides (18) to the

Stabilizer (3) with two M10 x 20mm Button

Screws (96). Then, attach the Stabilizer to the

Base (1) with an M8 x 75mm Carriage Bolt (83)

and an M8 Locknut (78). Do not tighten the

Locknut yet.

Attach the Upright (2) to the Base (1) with the two

indicated M8 x 75mm Carriage Bolts (83) and two

M8 Locknuts (78). Do not tighten the Locknuts

yet.

104

110

108

Holes

3. Attach the Front Leg (10) to the Base (1) with the

two M8 x 75mm Carriage Bolts (83) and two M8

Locknuts (78). Do not tighten the Locknuts yet.

Attach the Leg Lever Bumper (75) to the Front

Leg (10) with an M4 x 16mm Self-tapping Screw

(110) and an M4 Washer (104). Make sure that

the end of the Leg Lever Bumper is pointing

up.

Insert four M8 x 75mm Carriage Bolts (83) up

through the Base (1). ote: It may be helpful to

place a piece of tape over each Bolt head to

hold it in place.

Before beginning assembly, make sure

that you understand the information in the

box on page 8.

Frame Assembly

4. Attach the Frame (9) to the Upright (2) with two

M8 x 80mm Bolts (100), two M8 Washers (103),

and two M8 Locknuts (78). Do not tighten the

Locknuts yet.

Attach the Frame (9) to the Front Leg (10) with

two M8 x 65mm Bolts (101), two M8 Washers

(103), and two M8 Locknuts (78). Do not tighten

the Locknuts yet.

100

103

101

103 10

102

5. Attach the bottom of the Left Shroud (21) to the

Base (1) with two M4 x 12mm Self-tapping

Screws (102).

Repeat this step for the Right Shroud (not

shown).

6. ote: Some parts have been removed to show

this step clearly.

Slide the two Weight Bumpers (71) onto the

Weight Guides (18). Orient nine Weights (19) with

the pin holes on the bottom as shown. Slide the

Weights onto the Weight Guides.

Insert the Weight Tube into the nine Weights (19).

Make sure that the pin on the Weight Tube is

oriented as shown.

Lubricate the indicated holes in a Weight (19)

with the included grease packet. Slide the Weight

onto the Weight Guides (18).

Hole

Grease

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali WeiderPro Palestra domestica

WeiderPro

WeiderPro 335 Manuale utente

WeiderPro

WeiderPro 831.15791.2 Manuale utente

WeiderPro

WeiderPro Pro 4000 Manuale utente

WeiderPro

WeiderPro Pro 4500 Guida rapida

WeiderPro

WeiderPro 831.15925.2 Manuale utente

WeiderPro

WeiderPro Pro 4000 Manuale operativo e di manutenzione

WeiderPro

WeiderPro Pro 420 Bench Guida utente

WeiderPro

WeiderPro Pro 420 Bench Manuale utente

WeiderPro

WeiderPro Pro 4000 Manuale utente

WeiderPro

WeiderPro 831.15911.0 Manuale utente

WeiderPro

WeiderPro Pro 4500 Manuale utente

WeiderPro

WeiderPro Pro 420 Bench Manuale del sistema

WeiderPro

WeiderPro Pro 435 Bench Manuale operativo e di manutenzione

WeiderPro

WeiderPro 831.15906.0 Manuale utente

WeiderPro

WeiderPro Pro 435 Bench Guida utente

WeiderPro

WeiderPro 831.14933.0 Manuale utente

WeiderPro

WeiderPro Pro 440 Dc Ybt Bench Guida all'installazione

WeiderPro

WeiderPro 8000 Manuale utente

WeiderPro

WeiderPro 831.15925.0 Manuale utente

WeiderPro

WeiderPro Pro 440 Dc Ybt Bench Guida utente

WeiderPro

WeiderPro Weight bench exerciser Manuale utente

WeiderPro

WeiderPro Pro 4500 Manuale utente

WeiderPro

WeiderPro 380 Zlx Bike Manuale del sistema

WeiderPro

WeiderPro 831.15891.0 Manuale utente

Manuali Palestra domestica popolari di altre marche

Horizon Fitness

Horizon Fitness OXFORD 6 Manuale utente

Energetics

Energetics Multi Trainer 5.1 Manuale utente

Matrix

Matrix MG-PL Series Manuale utente

Reebok

Reebok Tbr2i Manuale operativo e di manutenzione

Weider

Weider 8300 Hard Drive Manuale utente

Pure Fitness

Pure Fitness 8526HE Manuale utente

Weider

Weider 8700 I Guida rapida

Bowflex

Bowflex Sport 001-6961 Manuale utente

NordicTrack

NordicTrack E8200 Competition Bench Guida rapida

Weider

Weider WEMC10161 Manuale utente

Body Solid

Body Solid GHYP-345 Manuale utente

Evo

Evo TAHOE 5105 Manuale utente

cardiobull

cardiobull RA17 Manuale utente

ParaBody

ParaBody 40 Manuale utente

JLL

JLL Ventus Pro Air Power Manuale utente

Trojan

Trojan Colorado 370 Manuale utente

Octane Fitness

Octane Fitness xRide xR650 Manuale utente

Precor

Precor Discovery Series Manuale utente