Weinmann prismaAQUA Manuale utente
LINE
Welcome Guide · English
Patient compass
Your guide to the therapy device
2
Touchscreen
Voltage input
SD card slot
HandleFilter compartment
On/off button
Name of device
Unlocking button
3
This document does not replace the instructions for use.
Complete information can be found in the instructions for use.
Welcome to Weinmann...
...and congratulations on your new therapy device! Equipped with state-of-the-art medical technology
tailored to your requirements, it will help you to sleep peacefully again and in doing so considerably
improve your quality of life.
To allow you to feel at ease with your new therapy partner from the word go, and start your therapy
immediately, we have compiled the most important information concerning the therapy device for
you in this patient compass.
Here's to your health!
Your Weinmann team
4
1. Preparing the therapy device....................................................................... 5
1.1 Connecting the therapy device up to the power supply.......................... 5
1.2 Connecting the respiration hose and mask............................................ 5
1.3 Setting the therapy device .................................................................... 6
2. Using the SD card....................................................................................... 7
3. Explanation of the symbols and displays on the screen ................................ 8
4. Starting/ending the therapy ...................................................................... 10
5. Conguring settings in the menu.............................................................. 12
5.1 Setting the time ................................................................................. 13
5.2 Setting the time zone ......................................................................... 13
5.3 Setting the wake-up time ................................................................... 13
5.4 autoSTART-STOP................................................................................. 14
5.5 softSTART .......................................................................................... 15
5.6 Energy saving mode........................................................................... 15
6. Cleaning the therapy device...................................................................... 16
7. Accessories: prismaAQUA respiratory air humidier ................................... 18
7.1 Preparation prior to rst use............................................................... 18
7.2 Filling with water ............................................................................... 18
7.3 Alternative lling................................................................................ 19
7.4 Connecting to the therapy device ....................................................... 20
7.5 Setting the respiratory air humidier................................................... 21
7.6 Cleaning............................................................................................ 22
Table of contents
5
1. Preparing the therapy device
The therapy device must be connected to the power supply for use.The hose and mask must also be connected.
If you want to disconnect the therapy device from the power supply, press the clip on the
connector and pull the connector out. Do not pull on the power supply cable.
1.1 Connecting the therapy device up to the power supply
a. Insert the power supply cable of the power supply unit in the
power supply port on the rear of the therapy device (voltage
input). When doing so, please pay attention to the alignment of
the connector!
b. Now plug the other end of the power supply cable into the power
socket.
1.2 Connecting the respiration hose and mask
a. Attach the respiration hose to the device outlet on your therapy
device as shown below.
b. Now connect the respiration hose to the ventilation mask, e.g.,
the JOYCEone nasal mask, our comfortable ventilation mask,
which adjusts to suit almost every patient automatically.
6
1.3 Setting the therapy device
Your therapy device needs to be set (congured) before you can use it for the rst time. The authorized dealer will often do this for you. If your authorized dealer has not
set the device, you can also do it easily yourself.
Setting the device using an SD card
With the help of a prepared SD card from your authorized dealer setting the device is child's play. You simply need to insert the SD card in the therapy device...and you're
done! The settings are now automatically transferred to the therapy device. Please note that your therapy device must not be disconnected from the power supply during
this procedure.
Do not disconnect the device from the power supply
when performing conguration.
7
2. Using the SD card
The SD card is included in the scope of supply of your therapy device.The device saves the settings automatically as soon as the SD card is inserted.
In addition, you can also save your therapy data on the SD card and make them easily available to your physician or authorized dealer.
Inserting the SD card
a. Open the SD card slot cover.
b. Slide the SD card into the SD card slot until it clicks into place.
When doing so, note: The beveled corner of
the SD card must be at the top and facing
the device during insertion.
When the device is switched on, the
symbol appears in the status line
on the screen.
Removing the SD card
Requirement: The symbol is no longer ashing.
a. Open the SD card slot cover.
b. Briey press in the SD card.
The SD card is ejected slightly.
c. Remove the SD card.
d. Label the SD card with your name and date of birth in order to
avoid confusion when it reaches the physician or authorized dealer.
e. Insert the SD card in
the protective wallet
included in the scope
of supply and send it.
The device saves the therapy data automatically when an SD
card is inserted.
To save the therapy data for a specic period manually,
please refer to the "Using the SD card" section of the
instructions for use.
8
Patient-related operating hours display
Displays the patient-related operating hours of the device for 30 seconds.
Start screen
3. Explanation of the symbols and displays on the screen
When you switch on your therapy device, a display appears on the screen for 30 seconds informing you of the patient-related operating hours of your device. If your
authorized dealer asks about the patient-related operating hours of your device, you can read these off conveniently during the rst 30 seconds after switching on the
device.
The screen then shows that the device is in "Standby" mode.
9
Info menu button
Provides access to the
info menu.
Wake-up time
Alarm is set.
Displays the set
wake-up time.
Menu button
Provides access to the settings.
Dimmer button
Makes the display dark.
Time with wake-up time
Set by pressing the time.
Screen in "Standby" mode
Go forward a screen
Go back a screen
Conrm
Reject
Back to start screen
Access to the main menu
Button functions
10
Screen in "Therapy" mode
Info button
Displays detailed
information about the
therapy in progress.
Respiration status symbol
Displays the current respiration status
(inhalation/exhalation).
Mask symbol
Displays how well
the respiratory mask
is positioned.
means: no leak;
means the
mask is not well
positioned.
softSTART button
· Switches the softSTART function on or off.
· Displays the remaining runtime of the softSTART in
minutes.
To allow you to sleep undisturbed, the
screen turns dark automatically after
30seconds. The therapy continues
normally. As soon as you press the
screen, the start screen is shown again.
The autoSTART-STOP function is activated via the
"Comfort" button in the main menu, see page 14.
4. Starting/ending the therapy
You have two options for starting the therapy:
Press the on/off button briey
or
If the autoSTART-STOP function is activated: Breathe deeply into the mask and your therapy device will switch on automatically. Ensure that
the respiration hose is placed where it will not be squashed and does not stop you from falling asleep.
Indice
Altri manuali Weinmann Umidificatore
