weintek iR-ETN Manuale utente
User Manual
iR-ETN/iR-ETN40R - EtherNet/IP Connection Guide
This guide walks through the steps to connect iR-ETN/iR-ETN40R with PLC.
UM020006E_20221109
Table of Contents
Overview.............................................................................................................................................................. 1
How to Generate EDS File using EasyRemoteIO............................................................................ 1
CODESYS ........................................................................................................................................ 3
Rockwell CompactLogix/ControlLogix ........................................................................................... 9
3.1. Adding a Single iR-ETN ....................................................................................................................... 9
3.2. Adding Multiple iR-ETN.................................................................................................................... 15
Panasonic FP7 .............................................................................................................................. 18
KEYENCE KV Series....................................................................................................................... 22
iR-ETN EtherNetIP Connection Guide
1
Overview
iR-ETN/iR-ETN40R firmware supports EtherNet/IP protocol. In EasyRemote IO software, the
description file (EDS) for EtherNet/IP devices can be generated. By scanning the iR-ETN/iR-ETN40R
devices in EasyRemote IO software, the EDS file can be generated according to the current I/O
configuration. The EDS file can then be imported by PLC or EtherNet/IP Scanner devices to complete
configuration with minimal effort.
Applicable firmware version:
iR-ETN: V1.0.3.0
iR-ETN40R: V1.0.0.1
Applicable EasyRemoteIO version:
iR-ETN: V1.3.2.0 or later
iR-ETN40R: V1.4.3.0 or later
For more information on updating iR-ETN firmware, please see
UM019005E_iR_Series_Firmware_Update_UserManual_eng.pdf
This user manual explains how to generate iR-ETN’s/iR-ETN40R’s EtherNet/IP EDS File, and how to
connect PLC to iR-ETN/iR-ETN40R via EtherNet/IP.
How to Generate EDS File using EasyRemoteIO
For more information on EasyRemoteIO, please see
UM018004E_EasyRemoteIO_UserManual_eng.pdf
Step 1. Launch EasyRemoteIO, click [Automatic scan] to scan network for iR-ETN/iR-ETN40R. The
information of iR-ETN/iR-ETN40R and the connected modules is shown as below.
Step 2. Click [File] » [Export EtherNet/IP EDS] and select the file to export tags.
iR-ETN EtherNetIP Connection Guide
2
Step 3. Select the iR-ETN and click OK.
EDS file is successfully exported.
iR-ETN EtherNetIP Connection Guide
3
CODESYS
This chapter explains how to connect two iR-ETN and iR Remote I/O in CODESYS.
Step 1. In EasyRemoteIO scan and export EtherNet/IP EDS.
Step 2. Open a new project in CODESYS and select a device.
Step 3. Click [Tools] » [Device Repository…].
Step 4. Click [Install…].
iR-ETN EtherNetIP Connection Guide
4
Step 5. Select [EDS and DCF files (*.eds, *.dcf)] and then select the first *.eds file.
Step 6. After importing the file, the iR-ETN is added under EtherNetIP Remote Adapter.
iR-ETN EtherNetIP Connection Guide
5
Step 7. Add an Ethernet device.
Step 8. Assign an interface (Ethernet).
iR-ETN EtherNetIP Connection Guide
6
Step 9. Add an EtherNet/IP Scanner.
*Please note that [Auto-reestablish Connections] must be selected.
Step 10. Add the first iR-ETN.
iR-ETN EtherNetIP Connection Guide
7
Start from step 3 again to add the second iR-ETN’s *.eds file. This will overwrite the *.eds file of the
first iR-ETN.
Add the second iR-ETN.
Step 11. The default iR module setting is shown. Add new parameters in User-Defined Parameters
tab.
The initial values can be set after adding new parameters.
iR-ETN EtherNetIP Connection Guide
8
Step 12. In EtherNet/IP I/O Mapping tab find the IO address and start editing the program.
Altri manuali per iR-ETN
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali weintek Sistema di conferenza
Manuali Sistema di conferenza popolari di altre marche
Kramer
Kramer VIA GO Manuale utente
AVT
AVT MAGIC AC1 Go Manuale utente
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manuale utente
Sony
Sony PCS-I150 Manuale utente
Middle Atlantic Products
Middle Atlantic Products VTC Series Manuale utente
Prentke Romich Company
Prentke Romich Company Vanguard Plus Guida
