Welch Allyn IMAGETEAM 3800 Manuale utente

Hand Held Linear Imager

Disclaimer

Welch AllynData Collection, Inc. reserves the right to make

changes in specifications and other information contained in this

document without prior notice, and the reader should in all cases

consult Welch Allyn Data Collection, Inc. to determine whether any

such changes have been made. The information in this publication

does not represent a commitment on the part of Welch Allyn Data

Collection, Inc.

Welch Allyn Data Collection, Inc. shall not be liable for technical or

editorial errors or omissions contained herein; nor for incidental or

consequential damages resulting from the furnishing, performance,

or use of this material.

This document contains proprietary information which is protected

by copyright. All rights are reserved. No part of this document may

be photocopied, reproduced, or translated into another language

without the prior written consent of Welch Allyn Data Collection,

Incorporated.

Welch Allyn Data Collection, Inc Web Address:

http://dcd.welchallyn.com

Table of Contents

IMAGETEAM 3800 User’s Guide

Section 1 Getting Started

Section Page

About This Manual 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting the Scanner When Powered by Host

(Keyboard Wedge) 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Plug and Play 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

USB 1–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Serial Wedge 1–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 2 Terminal Interfaces

Section Page

Keyboard Wedge Connection 2–1. . . . . . . . . . . . . . . . . . . .

Terminal ID 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Supported Terminals Chart 2–3. . . . . . . . . . . . . . . . . . . . . .

Keyboard Country 2–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Keyboard Style 2–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Keyboard Modifiers 2–6. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Serial Port Connection 2–8. . . . . . . . . . . . . . . . . . . . . . . . . .

Baud Rate 2–9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RS-232 Word Length: Data Bits,

Stop Bits, and Parity 2–10. . . . . . . . . . . . . . . . . . . . . . . . .

RS-232 Handshaking 2–12. . . . . . . . . . . . . . . . . . . . . . . . . . .

Wand Emulation Connection 2–13. . . . . . . . . . . . . . . . . . . .

Wand Emulation Transmission Rate 2–14. . . . . . . . . . . . . .

Wand Emulation Polarity 2–15. . . . . . . . . . . . . . . . . . . . . . . .

Wand Emulation Idle 2–15. . . . . . . . . . . . . . . . . . . . . . . . . . .

PDF417 Wand Emulation 2–16. . . . . . . . . . . . . . . . . . . . . . .

Data Block Size 2–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delay Between Blocks 2–17. . . . . . . . . . . . . . . . . . . . . . . . . .

Overall Checksum 2–17. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wake Up Pulse 2–18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

IMAGETEAM 3800 User’s Guide

Section 3 Output

Section Page

Scan Rate 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Beeper Volume 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Beeper Tone 3–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scan Voting 3–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reduce Quiet Zone 3–2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reread Delay 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Good Read Delay 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Trigger Mode 3–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 4 Data Editing

Section Page

Points to Keep In Mind 4–1. . . . . . . . . . . . . . . . . . . . . . . . . .

To Add a Prefix or Suffix 4–2. . . . . . . . . . . . . . . . . . . . . . . .

To Clear One or All Prefixes or Suffixes 4–2. . . . . . . . . . .

To Add a Carriage Return Suffix to all Symbologies 4–3.

Prefix Selections 4–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Suffix Selections 4–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Function Code Transmit 4–6. . . . . . . . . . . . . . . . . . . . . . . .

Intercharacter Delay 4–7. . . . . . . . . . . . . . . . . . . . . . . . . . . .

User Specified Intercharacter Delay 4–8. . . . . . . . . . . . . .

Interfunction Delay 4–9. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Intermessage Delay 4–9. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 5 Data Formatting

Section Page

Data Format Editor Introduction 5–1. . . . . . . . . . . . . . . . . .

Data Format Editor Commands 5–2. . . . . . . . . . . . . . . . . .

Data Format Editor 5–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Data Formatter 5–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Alternate Data Formats 5–6. . . . . . . . . . . . . . . . . . . . . . . . .

IMAGETEAM 3800 User’s Guide

Section 6 Secondary Interface

Section Page

Secondary Interface 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Secondary Code 39 Wand Emulation 6–1. . . . . . . . . . . . .

Secondary RS-232 Connection 6–1. . . . . . . . . . . . . . . . . .

Secondary Non Decoded Output Laser Emulation 6–2. .

Non Decoded Output Laser Emulation

Transmission Rate 6–2. . . . . . . . . . . . . . . . . . . . . . . . . .

Non Decoded Output Laser Emulation Polarity 6–2. . . . .

Non Decoded Laser Emulation Idle 6–3. . . . . . . . . . . . . . .

Disabling the Secondary Interface 6–3. . . . . . . . . . . . . . . .

Secondary Trigger Mode 6–4. . . . . . . . . . . . . . . . . . . . . . . .

Section 7 Symbologies

Section Page

Introduction 7–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Industrial Symbology Selections

Codabar 7–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Code 39 7–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Interleaved 2 of 5 7–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Code 93 7–13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Code 2 of 5 7–14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

IATA Code 2 of 5 7–15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Matrix 2 of 5 7–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Code 11 7–17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Code 128 7–19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Telepen 7–21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Retail Symbology Selections

UPC A 7–23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

UPC E 7–26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

EAN/JAN 13 7–29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

EAN/JAN 8 7–31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MSI 7–33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Plessey 7–35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

China Post Code 7–36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PDF417 Symbology Selections

Show GLI Blocks 7–38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scan Diagnostics 7–38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

IMAGETEAM 3800 User’s Guide

Section 8 Cloning

Cloning Procedure 8–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 9 Visual Menu

Section Page

Visual Menu Operations 9–1. . . . . . . . . . . . . . . . . . . . . . . .

Temporary Visual Menu Configuration 9–1. . . . . . . . . . . .

Installing Visual Menu from the Web 9–2. . . . . . . . . . . . . .

Section 10 Interface Keys

Section Page

Keyboard Function Relationships 10–1. . . . . . . . . . . . . . . .

Supported Interface Keys 10–3. . . . . . . . . . . . . . . . . . . . . . .

Section 11 –Utility Codes

Section Page

To Add Test Code I.D. Prefix to All Symbologies 11–1. . . .

Show Software Revision 11–1. . . . . . . . . . . . . . . . . . . . . . . .

Show Data Format 11–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 12 Defaults

Section Page

Resetting the Factory Settings 12–1. . . . . . . . . . . . . . . . . . .

Section 13 Specifications

Section Page

Product Specifications 13–1. . . . . . . . . . . . . . . . . . . . . . . . . .

Standard Cable Pinouts 13–5. . . . . . . . . . . . . . . . . . . . . . . . .

Section 14 Specifications

Scan Maps 14–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 15 Customer Support

Section Page

Obtaining Factory Service in the United States 15–1. . . . .

Obtaining Factory Service in Europe 15–1. . . . . . . . . . . . .

Obtaining Factory Service in Asia 15–2. . . . . . . . . . . . . . . .

Technical Support 15–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Limited Warranty 15–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Agency Compliance Statements

Programming Chart

Sample Bar Codes

Section 1 Getting Started

1–1

IMAGETEAM 3800 User’s Guide

The IMAGETEAMTM 3800 is a high performance linear imaging scanner from

Welch Allyn Data Collection, Inc. The IT3800 marks a new performance level

for hand held scanners. Linear imaging technology is defined by a bright and

sharply focused aiming line, high resolution imaging, and fast reading speed.

The IT3800 is comfortable to hold, easy to use, rugged, and excellent for all

general scanning applications.

About This Manual

This User’s Guide provides installation and programming instructions for the

IMAGETEAM 3800. Product specifications, dimensions, warranty, and

customer support information are also included.

Welch Allyn bar code scanners are factory programmed for the most common

terminal and communications settings. If you need to change these settings,

programming is accomplished by scanning the bar codes in this Guide.

An asterisk (*) next to an option indicates the default.

IMAGETEAM 3800 User’s Guide

1–2

Connecting the Scanner When Powered by Host

(Keyboard Wedge)

A scanner can be connected between the keyboard and PC as a “keyboard

wedge,”plugged into the serial port, or connected to a portable data terminal in

wand emulation or non decoded output mode. The following is an example of a

keyboard wedge connection:

1. Turn off power to the terminal/computer.

2. Disconnect the keyboard cable from the back of the terminal/computer,

as shown below.

Disconnect

3. Connect the appropriate interface cable to the scanner and to the

terminal/computer.

4. Turn the terminal/computer power back on. The scanner will beep

twice.

5. Verify the scanner operation by scanning a bar code from the back

cover of this manual. The scanner will beep once.

The scanner is now connected and ready to communicate with your

terminal/PC. You must program the scanner for your interface before bar code

data can be transmitted to your terminal/PC. If you are using the scanner as a

keyboard wedge, turn to page 2–1. If the scanner is connected via a serial

port, turn to page 2–8. If this is a wand emulation application, turn to page

2–13, and for a non decoded output connection, turn to page 6–2.

1–

IMAGETEAM 3800 User’s Guide

Plug and Play

Plug and Play bar codes provide instant scanner set up for commonly used

interfaces.

Note: After you scan one of the codes, power cycle the host terminal to have

the interface in effect

The most common interface is Keyboard Wedge. The following Keyboard

Wedge bar code also programs a carriage return (CR) and line feed (LF) suffix.

Keyboard Wedge Interface for IBM PC

AT and Compatibles

(Default)

The following Plug and Play bar code for IBM XT and Compatibles also

programs a carriage return (CR) and line feed (LF) suffix.

IBM XT and Compatibles

The following Plug and Play bar code for IBM PS–2 and Compatibles also

programs a carriage return (CR) and line feed (LF) suffix.

IBM PS–2 and Compatibles

Use Non Decoded Output Laser Emulation when connecting to a secondary

terminal with integral decoding. This also sets the transmission rate to 36

scans per second and the polarity to white high.

Non Decoded Output

Laser Emulation

For most laptops, scanning the Laptop Direct Connect bar code allows

operation of the integral keyboard. The following Laptop Direct Connect bar

code also programs a carriage return (CR) and line feed (LF) suffix.

Laptop Direct Connect

IMAGETEAM 3800 User’s Guide

1–4

The RS-232 Interface bar code is used when connecting to the serial port of a

PC or terminal. The following RS-232 Interface bar code also programs the

parameters:

Option Setting

Baud Rate 9600 bps

Parity Even

Data Format 7 data bits, parity bit, 1 stop bit (8 bit data)

RS-232 Interface

In Wand Emulation mode, the scanner decodes the bar code then sends data

in the same format as a wand scanner. The Same Code format transmits

UPC, EAN, Code 128 and Interleaved 2 of 5 bar codes without any changes,

but converts all other symbologies to Code 39.

Wand Emulation Same Code

The following Wand Emulation bar code sets the interface to Wand Emulation

mode and translates bar code data as Code 39 symbology. It also programs

the Transmission Rate to 25 inches per second, and Output Polarity to black

high.

Wand Emulation (Code 39 Format)

Note for the 3800PDF model: When the 3800PDF interface is set to wand

emulation, all PDF417 bar code data is transmitted as Code 128. Data from

other symbologies follow the rules described above.

Altri manuali per IMAGETEAM 3800

Indice

Altri manuali Welch Allyn Lettore di codici a barre

Welch Allyn

Welch Allyn SCANTEAM 2380 WAND Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 8300 Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 3210 Series Manuale utente

Welch Allyn

Welch Allyn Hand Held Products Quick Check 600 Series Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 8300 Manuale utente

Welch Allyn

Welch Allyn Scanteam PDF417 Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 3700 Wedge Manuale utente

Welch Allyn

Welch Allyn scanteam 3400 series Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 2070 BASE Manuale utente

Welch Allyn

Welch Allyn Scansteam 3400PDF Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 3470 CCD Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 3400PDF Manuale utente

Welch Allyn

Welch Allyn Scanteam 6180 Manuale utente

Welch Allyn

Welch Allyn Valueteam 3060 Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 3000PDF Manuale utente

Welch Allyn

Welch Allyn Scanteam 3700PDF Manuale utente

Welch Allyn

Welch Allyn SCANTEAM 3700 CCD Manuale utente

Welch Allyn

Welch Allyn scanteam 3400 series Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

Atid

Atid AT188N Plus Manuale utente