Weldex WDS-3510CT Manuale del proprietario
Installation and Operation
Joystick System Controller
■ WDS-3510CT
2
CONTENTS
Contents
General Information
Function Description ...……………………………..…………………………3
Scope of Delivery ………………………………..……………………………3
Safety Precautions ………..……………..……..…………………….………4
Connection and Configuration
System Overview ……………………………………………….……….…..5
Connecting the Keyboard …..………………………………………….……7
▪ Power Supply ……………………………………..……………………….8
▪ RS485 Interface …………………………………..……………………….8
Operation
Key Assignment …………………………………..……………………………9
General Operation ………….…………….……………………………….....11
Protocol/Baud Selection ...……….…………….………………………….....11
Joystick Control ………….…………….……………………………….....10
Exhibit
Troubleshooting ……………………………….….…………………………12
Technical Specifications ………………….……………….………………..13
Dimension ……………………………………..……………..………………14
3
GENERAL INFORMATION
General Information
Function Description
T
his external keypad controller is used for the controlling, monitoring
and programming of RS485 system products.
Due to its compact size, it can be integrated everywhere
harmoniously. With this keypad controller, you can control single
components as well as complexCCTV systems. Clients within the
RS485 BUS are selected via the numeric keypad. Contact with the
corresponding client is confirmed by an acoustic signal and
additionally in the keypad’s info display. Messages such as target
address, type of receiver and e.g. camera movements are also shown in
the display.
I
f you are using a matrix switcher, this is selected as central unit.
Connected pan/tilt heads or high speed dome cameras are
automatically enabled for control by the offset function integrated into
the matrix switcher. It is not necessary to additionally address them
directly.
T
his keypad controller comes with a robust joystick with integrated
zoom function (effected by turning the joystick). This makes it be
possible to control connected pan/tilt head camera stations
respectively high speed dome cameras reliablyand easily. Just one
hand is required for tracking an object with the connected camera unit.
A
potential separation with an optic-coupler (potential separator)
allows trouble-free data communication on the RS485 control line.
Scope of Delivery
▪ Remote control unit
▪ 3 m connection cable
▪ Power adapter 230/110 VAC to 12 VDC
▪Junction box
▪Operation manual
4
GENERAL INFORMATION
Safety Precautions
1. Read these instructions carefully before connecting the
components in order to avoid malfunctions and damages caused
by improper installation or use.
2. Installation may only be carried out by authorized personnel
according to the local safety regulations.
3. Only operate the device with the included power supply adapter
and the stated operating voltage.
4. Never use the camera for other purposes except that designated.
5. Repairs and adjustments at the device may only be carried out by
authorized personnel.
6. Remove the device from power supply if you do not use it for an
extended period of time.
7. Immediately disconnect the device from power supply if any liquid
or solid matter should get into the housing and have it checked by
your authorized dealer before re-using.
8. Follow the warning notes attached to the device.
9. Only use the device in dry, dust-free and non hazardous locations.
10. Only use the device indoors.
11. In order to avoid internal heat accumulation in the device:
- do not expose the device to direct sunlight.
- keep sufficient distance to direct heat sources.
5
CONNECTION AND CONFIGURATION
Connection and Configuration
System Overview
A. Standard Connect
RS-485 SIGNAL FLOW VIDEO SIGNAL FLOW
The following devices can be controlled with this keypad controller:
- Telemetry receiver for pan/tilt head
- Telemetry receiver for pan/tilt head with pre-set positions
- High speed pan/tilt head
- High speed dome for indoor use
- High speed dome for outdoor use
- Video matrix switcher (operation via RS485/232C)
- Digital video recorder for High speed domes (operation via RS485)
- The Controller manages directness the High speed domes
Controller Pan/Tilt Head
Dome
(Indoor)
Dome
(Outdoor) DVR
Matrix Switcher
Junction
Box CCD
Monitor
DVR
6
CONNECTION AND CONFIGURATION
B. Control via DVR Connect
RS-485 SIGNAL FLOW VIDEO SIGNAL FLOW
The following devices can be controlled with this keypad controller:
- Telemetry receiver for pan/tilt head
- Telemetry receiver for pan/tilt head with pre-set positions
- High speed pan/tilt head
- High speed dome for indoor use
- High speed dome for outdoor use
- Video matrix switcher (operation via RS485/232C)
- Digital video recorder for High speed domes (operation via
RS485/232C)
- The Controller uses DVR and indirectness it manages the High speed
domes
Controller
Dome
(Indoor)
Dome
(Outdoor)
DVR
Matrix Switcher
Junction
Box CCD
Monitor
DVR
7
CONNECTION AND CONFIGURATION
Connecting the Keyboard
The clients are connected in a parallel way to the RS485 line
(conductors A and B). Up to 32 clients with a max. connection length
of 6 m can be connected to the main line.
The RS485 line can have a length of up to 1200 m. A transmission line
with 120 Ohm has to be connected to the start and to the end of it in
order to avoid signal reflections. The terminating resistor for the RS485
can be connected to each client with a jumper.
A
A
B
B
CL 1 CL 2 CL(n-l) CL n
CL = Client
120Ω120Ω
Start 1200m End
8
CONNECTION AND CONFIGURATION
PACKING DETAIL
Only operate the device with the power supply adapter (12VDC)
included in the scope of delivery. Connect the power supply adapter to
the keyboard’s junction plug into the connector box.
The correct power supply is signaled by the LCD display.
- RS485 Interface
- Power supply
Connect the RS485 interface with correct polarity (TRX+ and TRX-) to
the junction box.
1. CONTROLLER
2. JUNCTION BOX 3. MANUAL 4. AC ADAPTOR
& POWER CORD
5. RJ45 CABLE (3m, 50cm)
DVR
DVR
G
OPERATION
Operation
This keypad controller can control all of RS485 devices. The
corresponding key commands for controlling the individual devices are
described in this chapter.
Key Assignment
ྙ
ྜ
ྜྷ
ྚ
ZT ZT ZT
_T _T _T _T
ྞ
ྟ
ྡ
ྡྷྣྤྥ
ྦ
ྦྷ
X]
X^
Number
GGGGGGGX
GGGGGGGY
GGGGGZT
GGGGGZT
GGGGGZT
GGGGGG[
GGGGGG\
GGGGGG]
GGGGGG^
_TSG_T
_TSG_T
GGGGGG`
GGGGGXW
GGGGGXX
GGGGGXY
GGGGGXZ
GGGGGX[
GGGGGX\
GGGGGX]
GGGGGX^
Description
slkGkUGwSGtG{VySGzG{Vy
tVzGyqT[\GwU
jhtGUGjGGkGG
k}yGUGk}yGG
tvuGUGtOtGPGG
uGU
sSGySG|GVGkGGGzopm{G
lzjVjslhyGUGlGGzGGG
lj{lyVzlslj{GUGzGGlGG
zGG
wylzl{V{v|yVwh{{lyuVzjhuG
zGvGGGGGG
mGUGoGG
jvu{yvsGUG}GGGj{ysGG
zopm{GUG}GGGzopm{GG
zl{|wGUGlGjGzG
tlt|GUGlGjVkGzG
mvj|zGulhyVmhyG
pypzGvwluVjsvzlG
lu{VlzjGGGG
vvtG{lslV~pklG
qvz{pjrGwV{VGv
`
10
OPERATION
Joystick Control
Joystick
Control Operation State Description
①ZOOM WIDE PTZ PTZ Zoom TELE
②ZOOM TELE PTZ PTZ Zoom WIDE
③▲ ▲ Menu setup Upper direction
④▼ ▼ Menu setup Lower direction
⑤◀ ◀ Menu setup Left direction
⑥▶ ▶ Menu setup Right direction
Indice
