Weldex wdl-1500m Manuale utente
Table of Contents
1. Table of Contents
2. Precautions
3. Warnings
4. Function
A. Front side of monitor
B. Back side of monitor
C. Explanation on remote control
5. System Wiring
6. Operation
A. Picture
B. Source
C. OSD
D. Setup
E. Screen
F. Terms
G. Check before asking warranty service
8. Packing List
9. Specifications
2
3
4
6
7
8
9
10
10
11
11
11
12
13
14
15
2. Table of Contents
WDL-1500M/1700M/1900M
Before operating the set, please read this manual carefully
Precautions. 3
Precautions
Do not remove the cover.
To reduce the risk of electric shock and maintain the quality of the product,
please do not remove the cover.
Please follow the instructions of the wiring diagram in the Installation Guide.
Keep small articles out of the reach of children.
Store small articles (screws, etc.) in places not accessible to children.
If swallowed, consult physician immediately.
Stop using immediately if a problem appears.
When problems appear, stop using the system immediately and contact the
dealer from whom you purchased the equipment. Some problems which may
warrant immediate attention include a lack of sound, noxious smoke being
emitted from the unit, or foreign objects dropped inside the unit.
Do not use this equipment outside the vehicle.
Do not use this equipment for purposes other than those listed for the vehicle.
Failure to do so may result in an electric shock or an injury.
Stop the vehicle before carrying out any operation that could interfere
with your driving.
If the operation of the unit(such as turning on or turning off the monitor, etc.)
interferes with your driving, stop the vehicle in a safe location before
attempting operation.
Temperature
Before turning your unit on, be sure the temperature inside the vehicle is
between -15 (+5 )and +60 (+140 )
Maintenance
If you have problems, do not attempt to repair the unit by yourself. Return it to
your purchasing dealer.
WDL-1500M/1700M/1900M
Warnings
4. Warnings
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To reduce the risk of electric shock do not remove cover(or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of "dangerous voltage" within a
product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING
To prevent fire of shock hazard, do not expose the set to rain or moisture. Do not rub or
strike the Active Matrix LCD with anything hard, as this may scratch, mar, or damage the
Active Matrix LCD permanently.
REGULATORY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try or correct the interference by one or
more of the following measures.
WDL-1500M/1700M/1900M
Warnings. 5
CAUTION
Do not attempt to modify this product in any way without written authorization.
Unauthorized modification could void the user's authority to operate this product.
POWER
This set operates on DC power. The voltage is as indicated on the label on the back
cover. Never apply AC power to the set directly. Do not allow anything to rest upon or
roll over the power cord, and do not place the set where the power cord is subject to
damage.
SERVICE
Never remove the back cover of the monitor, as this can expose you to high voltage and
other hazards. If the monitor does not operate properly, unplug it and call your dealer.
LOCATION
Position your monitor where no bright light or sunlight will shine directly on the screen.
Also ensure that the monitor is placed in a position that allows a free flow of air. Do not
cover the ventilation openings on the back cover.
CLEANING
Unplug the monitor before cleaning the face of the LCD Screen. Dust the monitor by
wiping the screen and cabinet with a soft, clean cloth. If the screen requires additional
cleaning, use a clean, damp cloth. Do not use liquid or aerosol cleaners.
WDL-1500M/1700M/1900M
Function
6. Function
A. Front side of monitor.
It is an explanation of the name and function per each part.
1. LCD PANEL
It supports a resolution 1024x768 [WDL-1500M]/
1280x1024 [WDL-1700M/1900M]mode (optimal condition) 16.2M colors.
2. REMOTE CONTROL SENSOR
IR-SENSOR is built in so that you can use remote control.
3. MENU
Display a main menu on screen.
4. DOWN
Press to use select items in the on-screen menu.
5. DECREASE/INCREASE CHANNEL OR VOLUME
6. SOURCE
TURN DOWN ACHANGE OF SCREEN
Change a mode to TV / VIDEO1 / VIDEO2 / S-VIDEO / PC.
7. POWER BUTTON
Turn ON/OFF power of monitor.
8. LED
Illuminates brightly when the monitor is switched on. (Power standby indicator)
WDL-1500M
WDL-1700M WDL-1900M
WDL-1500M/1700M/1900M
Function. 7
B. Back side of monitor.
It is an explanation of the name and function per each part.
1. Power input port.
It is a connection for power.(Use the adapter supplied)
2. Speaker output port.(PC)
Connect external speaker by audio cable.
3. Speaker input port.(PC)
Connect external sound output by PC audio.
4. S-VHS input port.
Connect with external equipment supporting S-VHS.
5. External BNC video input port.(1)
Connect to external image output port BNC cable.
6. External audio input port.(LEFT)
Connect RCA cable by fitting external sound output port color.(WHITE)
7. External audio input port.(RIGHT)
Connect RCA cable by fitting external sound output port color.(RED)
8. External video input port.(2)
Use to connect with external equipments additionally and connect to external image
output port and car rear view signal.
9. RGB input port.
Connect D-SUB connector of PC and monitor by D-SUB signal cable.
10. BNC LOOP output port.(1)
Connect to extra monitors or other display units.
POWER
SPEAKER OUT
S-VHS VIDEO 1 AUDIO L AUDIO R RGB
VIDEO2
REAR VIEW
SPEAKER IN
WDL-1500M/1700M/1900M
8. Operation
C. Explanation of remote control.
The button and function of remote control.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Power
Mute
VIDEO
S-VIDEO
PC
TV
Scan
Dimmer
Source
Display
Exit
CH
Menu
VOL
OSD
Brightness
Contrast
TINT
System
Auto Power
Rear gear
RESET
Turn on/off power of LCD monitor
Make sound of speaker be mute
Change to VIDEO mode (VIDEO 1,2)
Change to S-VIDEO mode
Change to PC mode
Change to TV mode
Scan channel automatically (TV only) to select
Dimmer control button
Press to display all of the available
video source
Present display mode
MENU becomes off
UP/DOWN channel of TV screen or menu
Display screen adjusting menu on screen
UP/DOWN mute or turn up/down sound
Set operating OSD display
Adjust the brightness of screen
Adjust the contrast of screen
Adjust the TINT of screen
Video system control (NTSC/PAL/SECAM)
The power of LCD stays ON or OFF
Rear gear function ON or OFF
Return to initial set mode
WDL-1500M/1700M/1900M
System Wiring. 9
System Wiring
POWER
SPEAKER OUT
S-VHS VIDEO 1 AUDIO L AUDIO R RGB BNC LOOP
VIDEO2
REAR VIEW
SPEAKER IN
It is an explanation how to connect to monitor.
- Caution: Turn off power before connecting PC and other
equipments and connect to monitor.
- Input Power consumption should be 220V or 110V
for AC/DC Adapter
- Use after plugging in outlet. (Connect to POWER)
AUDIO OUT
SPEAKER
DVD Player
Adapter
Left Signal Right Signal DC12V
Rear Gear
Signal GND REAR VIEW MOTORIZED CAMERA
WDRV-7063C
BNC LOOP
To Wall Outlet
Computer
RGB Out
Option
SIDE VIEW CAMERA
[LEFT]
WDRV-3478C
SIDE VIEW CAMERA
[RIGHT]
WDRV-3478C
WDL-1500M/1700M/1900M
10. Operation
Operation
: CONTENTS MOVE
: ADJUST
MENU KEY : ICON MOVE
SOURCE KEY : OSD EXIT
SOURCE
OFF ON
VIDEO 2
S VIDEO
PC
TV
VIDEO 1
OSD screen configuration and adjustment buttons
- Press "MENU" button to activate OSD menu screen.
- OSD is changed consequently as below when press menu continuously.
PICTURE SOURCE OSD SETUP SCREEN
Screen menu can be selected only when PC mode
- Press menu key 1~2 second to exit menu or press source button. (EXIT on remote control)
A. PICTURE
B. SOURCE
: CONTENTS MOVE
: ADJUST
MENU KEY : ICON MOVE
SOURCE KEY : OSD EXIT
PICTURE
CONTRAST
SATURATION
TINT
SHARPNESS
BRIGHTNESS
S
58%
- +
Select "BRIGHTNESS" fuction from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired brightness from the display.
Select "CONTRAST" fuction from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired contrast from the display.
Select "SATURATION" fuction from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired saturation from the display.
Select "TINT" fuction from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired tint from the display.
Select "SHARPNESS" fuction from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired sharpness from the display.
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
VIDEO 2
S VIDEO
PC
TV
VIDEO 1
Select desired source from the source menu.
Ex)
Source is changed as below when you select desired
source button on the set or remote controller.
VIDEO S-VIDEO TV
WDL-1500M/1700M/1900M
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Weldex Monitor
