Well SEC WL1014 Manuale utente
GSM LCD Alarm System
WL1014
User Manual
Date Issued: 2011-01-08
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page １of 35 Ver 2.1
Thank you for purchasing this alarm system. For proper use and your
safety, please read these instructions thoroughly and carefully before you
put the system in use. Keep this manual carefully for your reference in the
future.
Warning
Do not remove the front or back cover of the unit and keep it intact.
There is no part that can be repaired by user. If repair is needed,
please send it to seller or authorized service point.
The information contained in this manual is prepared for the alarm
system only. It adopts a sustainable development strategy.
Therefore, the company retains the right to modify or make
improvement to any product described herein without giving prior
notice. All rights reserved. The name of other companies or
products referred to herein may be the brand or product name of
their respective owners.
Precautions
Please read and follow the brief instructions below, otherwise physical
danger or system damage may be incurred. This manual contains more
detailed information about safety issues concerning the system in other
parts hereof.
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ２of 35 Ver 2.1
Proper use Read this manual carefully before you
put he system in use.
Operate in accordance with the
instructions herein.
Water-proofness The alarm system is not
waterproof. Please keep it dry.
Qualified maintenance Only those qualified maintenance
service professionals may repair the
alarm system.
Backup Be sure to back up all important
information stored in the system.
Original parts and Only original parts and batteries
batteries approved by manufacturer may be
used, otherwise the warranty
term may be breached and
danger may occur.
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ３of 35 Ver 2.1
Addition of other Before adding other equipment, please
equipment read the user manual for detailed safety
instructions. Be sure not to connect
incompatible products to the system.
Switch on safety Do not switch the Device on when
wireless phone use is prohibited or when
it may cause interference or danger.
Interference All wireless devices may be susceptible
to interference, which could affect
performance.
Switch off in Follow any restrictions. Switch the device
restricted areas off in aircraft, near medical equipment,
fuel, chemicals, or blasting areas.
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ４of 35 Ver 2.1
Table of contents
1. Brief introduction ----------------------------------------------------6
2. Standard Packing list ----------------------------------------------6
3. Function Introduction ----------------------------------------------6
4. Alarm Host Diagram -----------------------------------------------7
5. Installation ------------------------------------------------------------9
5.1 Insert SIM into Control Unit----------------------------------9
5.2 Install the Magnetic door/window sensors---------------10
5.3 Install the wireless PIR Motion Sensor-------------------11
5.4 Install other sensors------------------------------------------12
5.5 Install the Control Unit----------------------------------------12
5.6 Siren and wireless outdoor siren--------------------------12
6. Setting-----------------------------------------------------------------13
6.1 Enter Settings-------------------------------------------------13
6.2 Exit Settings---------------------------------------------------14
6.3 Factory Reset-------------------------------------------------14
6.4 Remote controller--------------------------------------------14
6.5 Defense zone-------------------------------------------------15
6.6 Change pass ward-------------------------------------------16
6.7 Clock Setting--------------------------------------------------17
6.8 Timing Settings-----------------------------------------------18
6.9 Call alert target phone number---------------------------19
6.10 SMS Alert Target cell phone number-----------------20
6.11 Defense Zone Programming----------------------------21
6.12 Home Arm Defense Zone Setting----------------------22
6.13 Voice Recording--------------------------------------------22
6.14 Siren Setting-------------------------------------------------23
6.15 Siren Setting in “Emergency Help” mode------------23
7. Operation Instructions --------------------------------------------23
7.1 Remote Controller Operation-------------------------------24
7.2 Answer Alarm Call--------------------------------------------26
7.3 Remote Control------------------------------------------------26
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ５of 35 Ver 2.1
7.4 System Dialing Function-------------------------------------27
8. Technical Parameters---------------------------------------------28
9. Care--------------------------------------------------------------------30
10. Add/Cancel wireless sensors to the Control Unit-----------31
11. Technical specifications of Control Unit-----------------------32
12. Important information----------------------------------------------32
13. Maintenance --------------------------------------------------------33
14. Warranty--------------------------------------------------------------33
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ６of 35 Ver 2.1
1. Brief introduction
The WL1014 is an innovative safety solution for home, office and industry.
It integrates GSM network, SMS Control, voice, wireless communication
and proprietary technologies. It is suitable for a wide range of applications.
2. Contents
Standard Packing List:
Control Unit
Magnetic Door Sensor
Two Wireless Remote Controls
PIR Motion Sensor
Mini Siren
Regulated 12vDC Power Supply
User Manual
Optional Accessories:
Combined Light and Siren
PIR Motion Sensor
Glass Break Sensor
Magnetic Window Sensor
Magnetic Steel Scrolling Door Sensor
Temperature Sensor
Oil Pressure electronic Sensor
Infrared Beam Fence
3. Function Instruction
1) 7 wired and 99 wireless defense zones;
2) LCD screen with time clock display;
3) Voice prompt for all operations;
4) 3 groups of timely arm and disarm;
5) Can store 6 phone numbers: when alarming, system will make alarm
call to these numbers automatically;
6) Can store 3 SMS numbers: when alarming, system will send alarming
SMS automatically;
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ７of 35 Ver 2.1
7) 10-second automatic message recording;
8) Built-in artificial intelligent digital voice announcer;
9) Built-in artificial intelligent English message;
10) Users can make calls by using keypad on alarm panel, just ike a
telephone;
11) One-key-control function: Out Arm, Home Arm, Remote Arm;
12) SOS, fire, gas, door, hall, window, balcony, and boundary places alarm;
13) Real-time, delay, 24 hours, bypass defense zones programming
function;
14) Wireless coding: easy to add additional wireless accessories;
15) Remote control Arm, Disarm, Monitor, and Intercom by hone;
16) SMS alert for power failure or recovery;
17) Built-in AAA NI-HI rechargeable battery: make alarm when power off.
4. Alarm Host Diagram
In order to make the main unit get the wireless signal well for all wireless
accessories, please put the alarm host at the central place of your defense
area. Make sure it’s away from large metal objects and household
appliances which may cause high frequency interference, as well as
barriers such as reinforced concrete wall or fire door, etc.
Alarm Panel front schematic diagram:
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ８of 35 Ver 2.1
Alarm Panel back schematic diagram:
Wired terminal block:
LCD display:
Well SEC Electronic Co., Ltd Http://www.wellsecurityalarm.com
Page ９of 35 Ver 2.1
5. Installation
5.1 Insert SIM into Control Unit
Please see the below photos:
Please insert SIM card and plug in power adaptor, and then power on the
system, all the LED lights will be on for 2 seconds and you will hear a long
Indice
