Well LEDFSC-MAVERICK30-WL Manuale utente
INSTRUCTION MANUAL
LED SOLAR FLOODLIGHT
Thank you for choosing WELL. Please read carefully the following instructions and keep them within reach.
Reorder No: LEDFSC-MAVERICK30-WL, LEDFSC-MAVERICK100-WL
Diagram:
Remote control
Important Safety Information
* Do not dispose of battery in fire. This may result in an explosion.
* Do not expose the light to fire or intense heat as the battery may explode.
* Do not immerse in water.
* Never look directly into the light.
Fixing instructions
* The light fixture should be installed on a flat and stable surface.
* Avoid installing the light near an air conditioner, a central heater, or high voltage system.
* The solar charger board should be set in a sunny area where maximum sunlight can be collected. Typically, the solar
board should face a direction (south) where sunlight can charge the board for at least 3 hours per day (5 hours per day
if behind glass).
It is suggested to charge the light for 24 hours before first use.
* Use a soft wet cloth to periodically (at least once a year) clean the charger board to avoid the reduction of power
output due to accumulated dust.
Quick Setup Procedure
Warning!
1. Please keep it away from the children.
2. This product can installed for outdoor, but we suggest that against for the rain/storm & High lights.
Note: Please bring the following tools
Installation:
3- Fix the lamp body to the
bracket.
Specifications:
LEDFSC-MAVERICK30-WL
Voltage: DC 3.2V
Luminous flux: 450lm
Power: 30W
Color temperature: 6500K
Viewing angle: 120°
Battery capacity: 3.2V 5Ah
Battery type: LiFePO4
Solar panel power: 5V, 6W
Solar panel size (mm): 180x270x17
Charging time: 5-6h
Protection: IP65
Housing: Diecast Aluminum
Cable length: 2m
Working temperature: -20℃ - +45℃
Lifetime: 30,000h
Package content: floodlight, solar panel, remote
control, connection cable
LEDFSC-MAVERICK100-WL
Voltage: DC 3.2V
Luminous flux: 1200lm
Power: 100W
Color temperature: 6500K
Viewing angle: 120°
Battery capacity: 3.2V 10Ah
Battery type: LiFePO4
Solar panel power: 5V, 15W
Solar panel size (mm): 350x350x17
Charging time: 5-6h
Protection: IP65
Housing: Diecast Aluminum
Cable length: 2m
Working temperature: -20℃ - +45℃
Lifetime: 30,000h
Package content: floodlight, solar panel, remote
control, connection cable
* Charging time with solar irradiation is 5-8 hours, but there are many factors due to the processes of usage and
region with customers.
* Discharge time, our mode is 100% brightness in the first 3 hours, and 60% in the next 3 hours, while the last 4
hours will be 30-40% brightness.
* Timing function: 3H, 5H , 8H
* Another mode is brightness adjustment mode, which is indicated on remote control.
* Best effect, recommended use of "AUTO" automatic mode.
Usually power on (installed) is defaulted to automatic mode.
* Automatic mode: The brightness of the whole lamp can be adaptively controlled according to the battery's own
power.
Waste electrical and electronic equipment are a special waste category, collection,
storage, transport, treatment and recycling are important because they can avoid
environmental pollution and are harmful to health. Submitting waste electrical and
electronic equipment to special collection centers makes the waste to be recycled
properly and protecting the environment. Do not forget! Each electric appliance that
arrives at the landfill, the field, pollutes the environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. 0264-438401*
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Well Proiettore
