Wellav CMP310HC Manuale utente
CMP310HC
Media Platform
User Guide
CMP310HC
V1.0-W
CMP310HC User Guide
i
Revision History
Date Version Description Author
2019-09-02 1.0 First Draft MC
This guide contains some symbols to call your attention.
DANGER
The DANGER symbol calls your attention to a situation that, if ignored, may cause
physical harm to the user.
CAUTION
The CAUTION symbol calls your attention to a situation that, if ignored, may cause
damage to Our product.
NOTE
The NOTE symbol calls your attention to important information.
TIP
The TIP symbol calls your attention to additional information that, if followed, can
make procedures more efficient.
Red Arrow
The Red Arrow symbols point to import details mention the context above or below
an image.
This guide also contains the following text conventions.
Bold Italic The bold Italic text indicates a button to click, an item in the drop-down menu to
select, or a certain item in the UI.
CMP310HC User Guide
ii
Safety Instructions
Read these instructions
Keep these instructions
Follow all instructions
Heed all warnings
Do not use this unit near water.
Only use a damp cloth to clean chassis
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
This unit is grounded through the power cord grounding conductor. To avoid electrocution, do
not remove the power cord before the outlet is switched off or unplugged. If the plug does not fit
into your outlet, consult an electrician for replacement of the outlet.
Route power cords and other cables so that they are not likely to be damaged.
Only use attachments/accessories specified by the manufacturer.
Do not wear hand jewelry or watch when troubleshooting high current circuits.
Do not work on the system during periods of lightning.
Refer all servicing to qualified service personnel. Servicing is required when this unit has been
damaged in any way.
Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions. As an improper
adjustment of the controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
If the product has been damaged in any way.
Replacement Parts: When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer. Unauthorized part substitutions may result in
fire, electric shock or other hazards.
CMP310HC User Guide
ii
Content
1 Chassis Overview .......................................................................................................................... 6
1.1 Front Panel .......................................................................................................................... 6
1.2 Back Panel .......................................................................................................................... 6
2 Installation ..................................................................................................................................... 7
2.1 Rack Installation .................................................................................................................. 7
2.2 AC Power Connection .......................................................................................................... 8
3 Web GUI ........................................................................................................................................ 8
3.1 Web GUI Overview .............................................................................................................. 8
3.1.1 Connect the Management Port .................................................................................. 8
3.1.2 Log into the Web GUI ................................................................................................ 9
3.2 Status ................................................................................................................................ 10
3.2.1 Device Status........................................................................................................... 10
3.2.2 Device Information ................................................................................................... 11
3.3 System Settings ................................................................................................................. 11
3.3.1 Network ................................................................................................................... 11
3.3.2 System..................................................................................................................... 11
3.3.3 Password ................................................................................................................. 13
3.4 Admin ................................................................................................................................ 13
3.5 Module List ........................................................................................................................ 14
3.5.1 Status ...................................................................................................................... 14
3.5.2 Settings.................................................................................................................... 15
3.5.3 OSD Settings ........................................................................................................... 17
3.5.4 IP Output ................................................................................................................. 20
4 Appendices .................................................................................................................................. 21
CMP310HC User Guide
ii
Appendix A - Abbreviations ...................................................................................................... 21
Appendix B- Warranty .............................................................................................................. 22
Appendix C- After-Sales Support ............................................................................................. 23
1 Chassis
1.1 Front Panel
CMP310HC series
is a brand of
television system with its high integration and cost effective.
input
and 8 channels of IP output. I
other IPTV and digital TV systems.
1. Reserve for future use port
2. Management port and
Data Port
3. Status and Power Indicators
4. Reset Button
Long press the reset button on the front panel
address to 192.168.1.10. Second, reset both username and password to admin.
1.2 Back Panel
1. HDMI 1
2. HDMI 2
3. HDMI 3
4. HDMI 4
CMP310HC User Guide
6
1 Chassis
Overview
is a brand of
multi-channel HD encoder which is
specially designed for Hotel
television system with its high integration and cost effective.
It supports
up to 8 channels of HDMI
and 8 channels of IP output. I
t
is very suitable for hotels, clubs, hospitals, baths, schools and
other IPTV and digital TV systems.
Data Port
Long press the reset button on the front panel
would make
two changes: First, reset the IP
address to 192.168.1.10. Second, reset both username and password to admin.
specially designed for Hotel
up to 8 channels of HDMI
is very suitable for hotels, clubs, hospitals, baths, schools and
two changes: First, reset the IP
address to 192.168.1.10. Second, reset both username and password to admin.
CMP310HC User Guide
7
5. Power Outlet
6. Power Switch
2 Installation
2.1 Rack Installation
The CMP310HC is designed to be mounted in a standard 19” rack. It takes 1RU of rack space. To
install it into a rack, please use the following steps:
1. Determine the desired position in the rack for the CMP310HC. Make sure that the air intake
on the top of the unit and the exhausts on the back of the unit will not be blocked.
2. Install the brackets at desired position if there’s no supporting plate in the rack.
3. Insert the rack mount clips into place over the mounting holes in the rack.
4. Slide the CMP310HC into the position in the rack.
5. Secure the chassis to the rack by installing four screws through the front mounting holes
and tightening.
CMP310HC User Guide
8
2.2 AC Power Connection
Please only use the supplied 3-prong power connector or one with equal specifications. NEVER
tamper with or remove the grounding pin. This could cause damage to CMP310HC, personnel, or
property. Make sure the power outlet is switched off before plug or unplug the power cable from the
panel of CMP310HC.
When take the equipment from a cold condition into a much warmer and humid condition, the
equipment should be acclimated to the warm and humidity condition for at least 30 minutes. Powering
up a non-acclimated unit may lead to shortcut or other damage to electronic components.
3 Web GUI
3.1 Web GUI Overview
3.1.1 Connect the Management Port
Factory network settings of the Management Port and Data Port:
IP address 192.168.1.10
Subnet Mask 255.255.255.0
Gateway 192.168.1.254
Take the following steps to access the Web GUI in a browser.
Connect PC to CMP310HC management port directly.
Set the IP address of the laptop/computer to the same network segment with the CMP310HC
baseboard IP address. For exmaple, you can set the the computer’s IP address to
192.168.1.200.
Check the physical connection by ping command.
CMP310HC User Guide
9
3.1.2 Log into the Web GUI
Enter the CMP310HC baseboard IP address into the URL field of any recommended Web browsers
(IE8 or above, Firefox, and Google Chrome) to access the login page. The default user name and
password is admin/admin. Click Login to log into the GUI.
CMP310HC User Guide
10
3.2 Status
3.2.1 Device Status
After a successful login, we will always enter the status overview page, where we can check the
device status of:
a) Module list: shows the embedded encode module.
b) Device host operating status in Device status options and the Device information option.
c) Setting buttons.
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Wellav Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
