Welotec TK600 Manuale utente
TK600
Version:
v1.0.0
Date:
16.05.2023
Contents
1 Preface 2
1.1 Panel................................................... 2
1.2 StructureandDimensions........................................ 3
2 Installation 4
2.1 Precautions: ............................................... 4
2.2 Installing and Uninstalling the Device on a DIN‑Rail . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3 InstallingaSIMCard........................................... 5
2.4 InstallinganAntenna .......................................... 5
2.5 InstallingthePowerSupply....................................... 6
2.6 Installing the Ground Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.7 ConnectingtheNetworkCable ..................................... 7
2.8 ConnectingTerminals.......................................... 8
3 Configuring Network Connection 9
3.1 Connectingtotherouter ........................................ 9
3.2 Loggingintotherouter ......................................... 10
3.3 NavigationBarOperations ....................................... 10
3.4 Overview................................................. 11
3.5 Network ................................................. 11
3.6 EdgeComputing............................................. 24
3.7 System.................................................. 27
3.8 Advanced................................................. 32
4 FAQ 37
4.1 How Do I Restore Factory Settings Through Hardware? . . . . . . . . . . . . . . . . . . . . . . . . 37
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 1
1 Preface
This document describes how to install and operate the TK600 series router. Before using these products, confirm
the product model and the number of accessories inside the package, and purchase a SIM card from the local
network operator.
1.1 Panel
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 2
1.2 Structure and Dimensions
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 3
2 Installation
2.1 Precautions:
•Power supply requirements: 24V DC (12 ‑ 48 V DC).
•Environment requirements: operating temperature ‑20°C to 70°C; storage temperature ‑40°C to 85°C; relative
humidity 5% to 95% (non‑condensing). The temperature on the device surface may be high. Install the device
in a restricted area and assess the surrounding environment.
•Avoid direct sunlight and keep away from thermal sources or areas with strong electromagnetic interferences.
•Install the router on an industrial DIN‑rail.
•Check whether the required cables and connectors are installed.
1.
2.2 Installing and Uninstalling the Device on a
DIN‑Rail
1.
2.2.1 Installing with a DIN‑Rail
Procedure:
Step 1: Select an installation place and reserve enough space for installation.
Step 2: Insert the upper part of the DIN rail seat onto the DIN rail. Grab the lower end of the device and revolve it
upward in the direction indicated by arrow 2 with gentle force, to insert the DIN rail seat onto the DIN rail.
Check that the device is installed reliably on the DIN rail, as shown in following figure on the right.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 4
2.2.2 Uninstalling with a DIN‑Rail
Procedure:
Step 1: Press the device downward in the direction indicated by arrow 1 to create a gap near the lower end of the
device so that the device isolates from the DIN rail.
Step 2: Revolve the device in the direction indicated by arrow 2 and grab the lower end of the device and move the
device outward. Li the device when its lower end isolates from the DIN rail. Then, take o the device from the DIN
rail.
2.3 Installing a SIM Card
TK600 supports Dual SIM card.
2.4 Installing an Antenna
Revolve the movable part of the metal SMA interface with gentle force until it cannot be revolved, in which state
the outer thread of the antenna connection cable is invisible. Do not wring the antenna with force by grabbing the
black plastic cover.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 5
2.5 Installing the Power Supply
2.5.1 Procedure:
Step 1: Remove the terminal from the router.
Step 2: Unfasten the locking screw on the terminal.
Step 3: Connect the power cable to the terminal and fasten the locking screw.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 6
2.6 Installing the Ground Protection
2.6.1 Procedure:
Step 1: Unfasten the ground screw cap.
Step 2: Put the ground loop of the cabinet ground cable onto the ground post.
Step 3: Fasten the ground screw cap.
Ground the router to improve its interference resistance. Connect the ground cable to the ground post of the router
based on the operation environment.
2.7 Connecting the Network Cable
Connect the router to a PC directly by using the Ethernet cable.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 7
2.8 Connecting Terminals
2.8.1 Power / Serial Terminals
Terminals provide the RS232 and RS485 interface modes. Connect cables to the corresponding terminals before
using the interfaces. During installation, remove the terminals from the device, unfasten the locking screws on the
terminals, connect cables to the corresponding terminals, and fasten the screws. Sort the cables in order.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 8
3 Configuring Network Connection
3.1 Connecting to the router
Step 1: By default, the IP address of WAN/LAN on TK600 is 192.168.1.1; the IP address of LAN on TK600 is 192.168.2.1.
This document uses the LAN port to access the TK600 as an example. Set the PCs IP address to be on the same
subnet with LAN.
Method 1: Obtain an IP address automatically (recommended)
Method 2: Set a fixed IP address
Select Use the following IP address, enter an IP address (By default, any from 192.168.2.2 to 192.168.2.254), subnet
mask (By default,255.255.255.0), default gateway (By default,192.168.2.1), and DNS server address, and click OK.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00 Page 9
Indice
Altri manuali Welotec Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza