WENPOD GP1+ Manuale utente
GP1+ USER GUIDE
TM
CONTENTS Technical Background
Introduction
Getting Started Handling Methods
Applications Support & Service
Technical Background
Fig 1-2
Fig 1-1
Fig 1-3
Fig 1-4
01
Technical Background
Fussy A.I. Logic – Combining the application on artificial intelligent algorithm with gyroscope,
it proactively stabilizes the shooting of video in horizontal-axis (shakinesss in horizontal
levelling), in tilt-axis (shakiness in tilt angle), as well as directional-axis (shakiness in left and
right motion). As a result, shakiness during video shoot can be greatly reduced.
Left right rotation 360°
while keeping GoPro
horizontal level stabilized
Front back rotation 360°
while keeping GoPro
vertical plane stabilized
"EWBODFE6TFS.PEF1BO-PDLFE
In "Pan locked mode" (Monitor on
handle facing upward), shooting
direction will be locked, while handle
can still be freely rotated left and right.
"EWBODFE6TFS.PEF'PMMPXNF
In "Follow-me mode" (Monitor on
handle facing downward), GoPro will
follow whatever direction when you
move your handle.
-FHFOE
-FHFOE * A.I. for Artificial Intelligence
Horizontal-axis for roll direction
Tilt-axis for pitch direction
Directional-axis for pan direction
Screen specifications
Screen size
Brightness
Rotatable angle
- 3.5 inch
- 400-800 cd/m2 (auto brightness adaptation)
- manually rotated 3 x 90° =270°
GP1+
产品保修卡
稳拍
02
Introduction
WENPOD GP1+ is the state of the art digital gyroscopic stabilizer. It empowers stability and
horizontal leveling when shooting video footage using GoPro action camera. With GP1 Plus, in
combination with a few simple techniques, it empowers ordinary people to produce extraordinary
video footages on the move. The built-in 3.5 inch rotatable monitor directly streaming recording
image as well as for playback purposes for your convenience.. When GP1+ is turned on, it also acts
as the supplementary battery source, which extends your GoPro power upto 2 hours (Under normal
condition).
Supports GoPro Hero 1/2/3/3+/4 Black/Silver Edition action camera.
Backup power source for your GoPro: Actively supply battery power to your GoPro camera,
when GP1+ is being powered on. It can extend your GoPro operating time upto 2 hours.
Product Specifications
What's in the box
Please check your contents carefully. If any items are missing, please contact your retailer.
Battery Adaptor Adaptor plug User guide Warranty card
Fig. 2-1
Model no.:
Dimension:
Weight:
Battery type:
Battery capacity:
Operating time:
Charging time:
Operating temperature:
Operating humidity:
Operating angle:
W 75mm
H 242mm
405g（including battery）
LiPo battery with protective circuit board
800mAh, 11.1V
about 120min in normal room temperature
about 30min ("Lightning Charg-in" patent pending technology)
-10 to 40 degree celcius
10% - 90%
360°All directions (Horizontal / Veritical axis)
WENPOD GP1+
L 135mm
11
①
②
⑤
④
③
⑥
⑦
⑧
⑨
⑩
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
11
This USB port is for manufacturer
maintenance purpose. Special
USB cable is required.
Connecting any cable or
charging via that port is NOT
permitted, and will cause
damages to your SP1 Plus.
Doing such will void your
warranty.
Fig 2-3
Fig 2-4
03
GoPro REC button
GoPro mounting frame
USB Port
Tilt axis motor
3.5-inch rotatable LCD screen
Tilt angle controller joystick
Manufacturer USB port
Power ON/OFF button
Charging port
Battery compartment
door
Roll axis motor
Features
Horizontal-axis remain stabilized while handle
can be freely rotated in 360 degrees.
1Horizontal-axis remain stabilized while handle
can be freely rotated in 360 degrees.
2
360°
Fig 2-4
360°
Fig 2-5
Follow-me mode
When handle is flipped down as in the following diagram (roll-axis motor is located below the GoPro
camera), the motor that controls the horizontal leveling will seamlessly change to the pan-axis. This
allows the lock on the pan direction, while other axis is still being stabilized.
4
Fig 2-7
360°
Pan Lock Mode
When handle is lifted up as in the following diagram (roll-axis motor is located above the GoPro
camera), the motor that controls the horizontal leveling will seamlessly change to the pan-axis.
This allows the lock on the pan direction, while other axis is still being stabilized.
3
Fig 2-6
360°
04
Fig 2-9 Fig2-10
Fig 2-11
Rotatable LCD Screen
GP1+ comes with a 3.5-inch LCD screen which allows the user to enjoy real-time shooting.
Remarks *
To be manually rotated 180 degrees
maximum from left or right. It will be
hyper-rotated if the rotation angle
exceeds 180 degrees thus it is
considered as man-made damage.
5
Digital tilt angle control joystick
The digital joystick controller allow smooth operation in tilt angle control.
Pull down = tilt up the camera. Push up = Tilt down camera.
Charging Function
When GP1+ is powered on, it serves a charging function via USB connection to prolong the GoPro
camera's battery operating span.
6
7
Fig 2-8
05
Installing battery
As in the following diagrams, open the battery compartment door by sliding the switch to "open". Insert the battery in the
direction of the triangle mark toward the battery compartment. Close the compartment door, and slide the switch to "lock"
position.
This section introduces some basic yet important prepration steps as well as some basic
operations.
Fig 3-1
Fig 3-3
Fig 3-2
Fig 3-4
Getting
Started
06
Charging the battery
◆ Plug in the adaptor into the wall plug outlet. Flip up the protective cover on handle, and insert the charging plug into the
charging port.
◆ When the indicator LED on handle turns RED, the charging process has started。
◆ When the battery is fully charged, the LED indicating light will go off。
◆ After your battery is fully charged, please remove the charging plug as soon as possible, and cover the port with the
protective cover. In addition, please remove the adaptor from
the wall outlet.
◆ If you intend not to use your GP1 for long period of time, please remove the battery, and place it in a clean and cool area.
Remark: In normal room temperature, it requires about 30 minutes for completely discharged battery to be fully charged.
The charging time may vary according to the temperature and power remained in the battery.
Installing the GoPro Camera
As shown in Fig 3-5, the GoPro lens is facing outward, a slight push to slide the camera towards the USB port (Fig 3-6 and Fig
3-7).
Remarks *
Before installation, ensure the GoPro camera functions normally and ensure there is adequate space in the memory card.
Fig 3-5
Fig 3-7
Fig 3-9
Fig图 3-6
Fig 3-8
Camera frame/
mount
facing downward
GoPro lens
facing outward
REC button
Power on
Hold the handle vertically upright with one hand, while the other hand holds the frame vertically upright as well
as leveling it horizontally. Press power button, ensure your hands are stationary. After 2 seconds, the LED
indicator light turns into slow flashing status, you may now release the hand that is holding the camera/frame,
and GP1+ is ready to use in Landscape mode.
Remarks:
As soon as GP1+ is powered on, do not attempt to use the device immediately. Allow it to turn from still LED
light mode to flashing mode. During this process, it automatically records the balancing status of GoPro and
GP1 and sets it as default status.
Horizontal line
Vertical line
Push backward to
attach camera to GP1+
Slide towards
the USB port
07
Your wrist must be locked
and steady in order to record
a stable footage
Landscape Mode
In this mode, your footage will be recorded in landscape position. It is best suited for making a VIDEO
SELFIE.
Hold handle invertedly ① （For advance
users）This position can be reached by holding
your handle in upright position and lower your arm
naturally toward your legs. This position is best
suited for low-angle shots for babies standing or
crawling, pets and simulate shots as used in
studio arm.
Hold handle invertedly ②
Flip the device over and hold it as shown in Fig 4-3.
It allows GP1+ to shoot horizontally in slow skate-
boarding/scootering motion.
Fig 4-2
Fig 4-1
Handling
Method
Fig 4-3
08
Indice
Altri manuali WENPOD Accessori per fotocamere
