WENPOD MC Manuale utente
MC
Motion Control User Guide
CONTENTS
Part 1 Product Introduction .............................................1
Item List....................................................................................1
Product parameters.............................................................2
Part 2 Preparation before Usage ........................................ 3
Charge ......................................................................................3
Mount and Dismount Battery .........................................4
How to Mount Smart Phones .........................................5
Part 3 Usage Introduction.................................................... 5
Power on..................................................................................5
Matching..................................................................................6
Joystick Mode........................................................................7
Kinetic Mode..........................................................................8
Part 4 Repair Service ............................................................10
Part 1 Product Introduction
Thank you for choosing WenPod MC Motion Control. MC
is a next generation kinetic remote for MD2 DSLR stabilizer.
This is the world first kinetic remote which integrated the
gesture control function with the joystick control. With
high-tech and light weight design concept, MC empowers
cameramen to control MD2 by simply moving the hands in
the direction they want.
A highly intelligent kinetic mode is applied to MC on the
basis of joystick mode. This helps cameramen find new view
in different modes and experience brand new sensation.
Item List
Please check if the following items are included before
usage. Please contact your seller in case that anything is
missing.
MC Motion Control LB-1 Battery X 2
BC-02 Charger Adapter Set
User Guide Warranty Card
Product Parameters
Model：WenPod MC
Size： 260 X 180 X 70 mm
Weigh：0.6kg
Payload：0.3kg
Battery Type：Wenpod LB-1 Li Ion Battery
Operating Time：50-100 minutes in normal temperature
Charging Time：about 60 minutes in normal temperature
Output Specification：USB 5V 2.1A；DC3.5 12V 2A
Operating Temp：-10℃ —40℃
Operating Humidity：<90%
Max. range of control : 50 meters
1.Left Joystick 2.Phone clip 3.Charging Port 4.Multi-function Button
5.USB Port
6.Update Port 7.Right Joystick 8.Power Switch 9.Indicator Light
10.Speed Control Dial Switch
Part 2 Preparation before Usage
Here is the preparation before using MC and instruction
about BC-02 charger.
Charging Instruction
1．Connect adapter to DC3.5 Charging hole of BC-02, then
plug the adapter in the socket. （See Figure 1）
2．Put the battery into BC-02 charging slots, charging begins.
（See Figure 2）
（Figure 1） （Figure 2）
Light Indication
Charging Full No battery
Red Green Switch
3．The following two modes are OK for charging (Max
current 2.4A):
No battery With LB-1
4．The following modes can charge other electrical
equipment simultaneously. (Max current 2.4A)
With LB-1
Tips to use MC and battery:
※ Full charge the battery before usage for new MC.
※ Please take out the batteries and put them in a dry cool
place if you do not use the charger for a long time.
Assemble and Disassemble battery
（Figure 1） （Figure 2）
Put the battery to MC battery compartment（See Figure
1）, then slide it forward according to the direction of
triangular mark on the battery until a click is heard, which
means the battery is secured（See Figure 2）. To dismount the
battery, press the button next to the battery（See Figure 3）,
slide toward the opposite direction and take it out（See Figure
4）.
（Figure 3） （Figure 4）
How to mount smartphones
Put the smartphone onto the phone clip and tighten it
with the belt（See Figure 5）. Adjust the smartphone to a
proper position, press the fastener to lock it in place. A USB
port and a DC3.5 port is at the back of MC for charging from
different equipment（See Figure 6）.
（See Figure 5） （See Figure 6）
Part3 How to use
Power on
Power on and the indicator light on the left flash green.
That means MC is turned on.
Pairing the remote
1、Operation on MD2:
2、Operation on MC：
3、Pairing will be finished in about 2 seconds. Indicator
lights on both MD2 and MC turn constant blue if pairing
successfully. Restart MD2 and MC to use.
※ Once MD2 and MC are paired successfully, the pairing
data will be stored. There is no need to pair again.
Joystick Mode
1、Power on MD2 and MC. Both indicator lights flash green.
2、Enter joystick mode
3、Joystick operation
1) Left joystick: Move the joystick left and right to control
the pan axis of MD2.
2) Right joystick: Move the joystick up and down to
control the tilt axis of MD2.
3) Speed control wheel: Use this wheel to control the
Indice
