West Ocean WS-604 Manuale utente
West Ocean WS-604 Digital LED Clock User Guide
1/ 21
Installation and User Guide
WS-604 V2.00
DIGITAL LED CLOCK
West Ocean WS-604 Digital LED Clock User Guide
2/ 21
Contents:
1. What’s in the box
2. Get to know your LED Clock
3. Getting started
4. Using the Remote Controller
5. Wireless control via your smart phone or PC
6. Connect the Clock with Internet
7. Calibrating your Clock
8. Multiple Mounting options
9. Customer Support
10. Specifications
11. Using Tips
12. Update your Clock
West Ocean WS-604 Digital LED Clock User Guide
3/ 21
1. What’s in the box
Digital
LED Clock
User
Guide
Remote
Controller
Power Adapter
(2m cord)
2 Screws
2 wall plugs
Electrical wire
for concealed
installation
West Ocean WS-604 Digital LED Clock User Guide
4/ 21
2. Get to know your LED Clock
The Front:
Yellow light on: Buzzer on Blue light on: Alarm set
Yellow light off: Mute Blue light off: No Alarm set
Green light on: Wi-Fi connected
Green light off: Wi-Fi connect lost
The Side:
West Ocean WS-604 Digital LED Clock User Guide
5/ 21
The Back:
3. Getting Started
Power up your LED Clock using included
power adapter.
The clock will show current time of Pacific
Time Zone immediately.
Note: To calibrate the clock or change default time
zone, please refer to section 5 of “Wireless Control”
or section 7 Calibrating your clock”.
West Ocean WS-604 Digital LED Clock User Guide
6/ 21
4. Using the Remote Controller
1. Press M1 to display current Time.
2. Press M2 for 1-99 SECONDS Countdown
•Using numeric keypad until your desired Countdown
SECONDS is displayed in SS:MS.
•Press to start or pause Countdown.
•Upon completion, it will beep one time.
3. Press M3 for MINUTES Countdown
•Using numeric keypad until your desired Countdown
MINUTES is displayed in MM:SS.
•Press to start or pause Countdown.
•Upon completion, it will beep one time.
4. Press M4 for HOURS Countdown
•Using numeric keypad until your desired Countdown
HOURS is displayed in HH:MM.
•Press to start or pause Countdown.
•Upon completion, it will beep one time.
5. Set up 0-99 SECONDS Timer
•Press until number 5 is displayed.
•Press to confirm selected mode. Display format
is 00:00 (SS:MS).
West Ocean WS-604 Digital LED Clock User Guide
7/ 21
•Press to start timer or pause.
•It will beep one time when the timer reaches 99
Seconds and stop.
6. Set up 0-99 MINUTES Timer
•Press until number 6 is displayed.
•Press to confirm selected mode. Display format
is 00:00 (MM:SS).
•Press to start timer or pause.
•It will beep one time when the timer reaches 99 Min.
and 59 Sec and stop.
7. Set up 0-99 HOURS Timer
•Press until number 7 is displayed.
•Press to confirm selected mode. 00:00 (HH:MM)
will be displayed. Under this mode, the colon ‘:’ will
flash at timing and stop at pause.
•Press to start timer or pause.
•It will beep one time when the timer reaches 99 Hours
and 59 Minutes and stop.
8. Set up desired number display
•Press until number 8 is displayed.
West Ocean WS-604 Digital LED Clock User Guide
8/ 21
•Press to confirm selected mode. The LED
screen will be dark. Using numeric keypad to show
your desired number or time or score to display.
•Press to choose to show colon ‘:’ or not
•Press to change.
9. ON/OFF
To turn on or off the screen when you are using it as clock.
10. 12/24
Press this button to switch between 24/12-Hour Time.
Note: You don’t need Wi-Fi to use Remote Controller.
However, if you want to calibrate the clock, set up alarms or change
default setting of Countdowns, you will need to connect your Clock with
Wi-Fi.
West Ocean WS-604 Digital LED Clock User Guide
9/ 21
5. Wireless control via your smart phone or PC
Important: To calibrate the clock, control the clock via web
browser, set up alarm and change default settings of
Countdowns, please make sure your LED clock is connected
with your device.
ONE STEP to connect your device with your LED Clock:
Go to the Wi-Fi settings of your
smart phone or computer and
connect to the Wi-Fi network
name started with “WS-XXXX”
Enter Password
“12345678” to connect.
.
Note: This network provides access to the LED Clock setup page only. If
you see an “Unsecured Network” or “No Internet Connection” Message,
please ignore it and connect anyway.
West Ocean WS-604 Digital LED Clock User Guide
10 / 21
Once your device is connected
to your LED Clock, open your
web browser and in the url
address bar enter 192.168.4.1
and press Enter or Go.
Tap on the loaded Menu to
manage your LED clock.
To calibrate the Clock: (Recommended)
Note: there are 2 other options to calibrate the Clock, please refer to
section 7 “Calibrating your Clock”
Tap on “Clock Calibration”.
On the loaded screen tap on
“Sync time” to calibrate your
LED clock.
Upon completion, you will see a
message “Successfully
Calibrated”
Altri manuali per WS-604
1
Indice
