West Vannik ST11001-1047 Istruzioni di montaggio
10.1” Panel PC - Hardware Manual Version 1.0
10.1” Panel PC
Hardware Instruction Manual
10.1” Panel PC - Hardware Manual Ver1.0
ii
Publication History
Version
Date
Description
1.0
Nov. 24, 2014
Initial Release
10.1” Panel PC - Hardware Manual Ver1.0
iii
Warnings and Safety Precautions
FCC STATEMENT
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
CE
This product is marked with the CE symbol and indicates compliance
with all applicable directives.
WEEE DIRECTIVE & PRODUCT DISPOSAL
At the end of its serviceable life, this product should not be treated as
household or general waste. It should be handed over to the applicable
collection point for the recycling of electrical and electronic equipment, or
returned to the supplier for disposal.
Internal / Supplied Batteries
This symbol on the battery indicates that the battery is to be collected
separately. This battery is designed for separate collection at an
appropriate collection point. Do not dispose of as household waste. For
more information, contact the retailer or local authorities in charge of
waste management.
10.1” Panel PC - Hardware Manual Ver1.0
iv
IMPORTANT GUIDELINES
•User Manual – After unpacking this product, read the owner’s manual carefully,
and follow all the operating procedures and other instructions.
•Power Source – This product should be operated only from the type of power
source indicated on the label. If unsure of the type of power supply available in
your home, office, or the area where you intend to use the product, consult
product dealer or local power company.
•Ventilation – Slots and openings in the cabinet are provided for ventilation.
They ensure reliable operation of the product and protect it from overheating.
These openings must not be blocked or covered. The product should not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the instructions have been adhered to.
•Heat – The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products that produce heat. The
general operating temperature should be 5ºC ~45ºC.
•Water and Moisture – Do not use this product near water. Do not exceed the
humidity specifications for the product as detailed in this manual.
•Cleaning – Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth.
•Power Cord Protection – Power-supply cords should not be routed so that
they are likely to be walked on or pinched by items placed against them, paying
particular attention to cords at plugs, receptacles, and the point where they exit
the product.
•Overloading – Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electrical shock.
•Lightning – For added protection for this product during storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet.
This will prevent damage to the product due to lightning and power line surges.
•Accessories – Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may be irreparably damaged if it falls off and
may cause serious personal injury.
•Burden – Do not place a heavy object on top of or step on the product. The
object may be irreparably damaged if it falls off and may cause serious
personal injury.
•Damage Requiring Service – Unplug the unit from the outlet and refer
servicing to qualified service personnel under the following conditions:
»When the power-supply cord or plug is damaged.
»If liquid has been spilled, or objects have fallen into the unit.
10.1” Panel PC - Hardware Manual Ver1.0
v
»If the unit has been exposed to rain or water.
»If the unit does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the unit to its normal
operation.
»If the unit has been dropped or the enclosure has been damaged.
»When the unit exhibits a distinct change in performance - this indicates a need
for service.
•Servicing – Do not attempt to service this product. Opening or removing
covers may expose the user to dangerous voltage or other hazards. Refer all
servicing to qualified personnel.
•Safety Check – Upon completion of any service or repairs to this unit, ask the
service technician to perform safety checks to determine that the unit is in
proper operating condition.
ABOUT THE USE OF THIS PRODUCT
Users of the system are responsible for checking and complying with all federal,
state, and local laws and statutes concerning the monitoring and recording of video
and audio signals. The Company shall not be held responsible for the use of this
system in violation of current laws and statutes.
ABOUT THIS DOCUMENT
This user manual has been compiled with great attention and care. The information
it contains has been thoroughly verified. The text was complete and correct at the
time of printing. Due to further product development, however, the contents of this
document may change without prior notice. The Company accepts no liability for
damages resulting directly or indirectly from errors, omissions, or discrepancies
between this guide and the product described.
All trademarks mentioned belong to their owners, third party brands, product
names, trade names, corporate names and company names mentioned may be
trademarks of their respective owners or registered trademarks of other companies
and are used for purposes of explanation and to the owner's benefit, without
implying a violation of copyright law.
RELATED DOCUMENTS
This document may be referenced by or may refer to the following relevant
manuals:
•10.1” Panel PC User Manual
10.1” Panel PC - Hardware Manual Ver1.0
vi
CAUTION
Explanation of Graphical Symbols
This symbol is intended to alert the user to the
presence of insinuated "dangerous voltage" within
the products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instruction in the literature accompanying
the product.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
10.1” Panel PC - Hardware Manual Ver1.0
vii
Table of Contents
Publication History................................................................................................ ii!
Warnings and Safety Precautions ....................................................................... iii!
Table of Contents .................................................................................................. vii!
1 Overview ............................................................................................................. 1!
1.1 Package Contents.................................................................................................... 2
1.2 Mechanical Drawing................................................................................................. 2
1.3 Rear Panel ............................................................................................................... 3!
1.4 Exploded View Drawing ........................................................................................... 4!
2 Device Installation.............................................................................................. 5!
2.1 Hard Disk Installation ............................................................................................... 6!
2.2 PCIe Mini Card Installation....................................................................................... 9
2.3 DDR3 SO DIMM Installation .................................................................................... 10!
2.3.1 Install DDR3 SO DIMM .................................................................................... 10!
2.3.2 Remove DDR3 SO DIMM ................................................................................ 11!
1
Chapter
1
1 Overview
10.1” Panel PC - Hardware Manual Ver1.1
2
1.1 Package Contents
This Panel PC includes:
•Panel PC x 1
•Power Adaptor & Power Cord x 1
•HDD Accessory Pack x 1
oHDD bracket
oThermal Pad
oSATA Cable Set
oScrews package
1.2 Mechanical Drawing
The mechanical drawing incl. Panel PC drawing and wall mount cutting size.
10.1” Panel PC - Hardware Manual Ver1.0
3
1.3 Rear Panel
Panel PC Rear Panel
No
Function
1&2
COM port x 5
3
Power Switch
4
USB 3.0 x 2
5
USB 2.0 x 2
6
Ethernet x 2
7
Audio (Mic In / Line Out)
8
DVI
9
HDMI
10
DC IN
11
Antenna (option)
Questo manuale è adatto per i seguenti modelli
2
Indice
