Westcott 7580 Manuale utente
Flex Cine Wireless DMX Dimmer
User Manual
V1.0001
9/9/2018
Contents
Contents 2
Introduction 4
Choose Between Wireless or Wired DMX 4
Dimmer Control Modes and Presets 4
V-Mount AC and DC Power Options 4
Cutting-Edge Technology 4
Durable Lightweight Enclosure 4
Included Components 5
Overview 5
Warnings 6
Updating Firmware 7
Important Firmware Notes 7
Powering the Wireless DMX Dimmer 8
Connecting Flex Mats 9
Connecting a Flex Cine LED Mat 9
Connecting a Flex LED Legacy Mat 9
Disconnecting a Flex Cine LED Mat 9
Disconnecting a Flex LED Legacy Mat 9
Basic Operation, Switches & Controls 10
Main Menu Screen 11
Selectable Menu Options 11
Main Menu Options Details 11
DMX(001)(Local) 11
Mode 11
Config 11
Stored Preset 11
Mode Menu Screen | Mat Selection 12
Abbreviation Key 12
Selectable Menu Options 12
Mode Menu Options Details 12
Source Matching 12
Gels 13
RGWB+I (5Ch) 13
Bi-Color (2Ch) 14
2
Daylight (1Ch) 14
Source Matching, Gels & User Saved Presets 15
Accessing & Adjusting 15
Source Matching Presets Explained 15
Gel Presets 16
Accessing & Adjusting 16
User Defined Stored Presets 17
Accessing & Adjusting 17
DMX Operation: Addressing and Operation 18
Flex Mat Channel Requirements 18
Important DMX Addressing Information 18
DMX (Hardwired) Connection 18
DMX over ArtNET Connection 18
Example DMX Addressing Scenario: 20
WiFi Host/Client Operation 21
HOST Mode 21
CLIENT Mode 21
WiFi Settings 22
Step-by-Step 22
WiFi Setup Images 25
Image01: WiFi Networks 25
Image02: Mode Selection 26
Image03: AP Interface Setting 27
Image04: STA Interface Setting 28
Image05: Application Setting 29
Image06: Device Management 30
Image07: Restart Module 31
Image08: Rebooting 32
Image09: Apply 33
TE-9 Pin Connector Diagram 34
V-Mount Plate Pin Data 35
V-Mount Plate D-Tap Port 35
Warranty Information 36
Legal Information 37
3
Introduction
Thank you for purchasing a Westcott Flex Cine Wireless DMX Dimmer. The dimmer is able to
operate all Flex Cine LED mats, including RGBW, bi-color, and daylight sizes 1' x 1' up to 2' x 2'. It’s
also backwards compatible with most original Flex mats with an optional TE-9 pin adapter.
Features
Choose Between Wireless or Wired DMX
The dimmer is designed with DMX512 Input/Output 5-Pin Male/Female XLR and WiFi capability
for controlling one or multiple dimmers via WiFi Host/Client Mode. When operating DMX over
Art-Net, the dimmer is compatible with mobile apps including Luminair that offer advanced
lighting effects and controls.
Dimmer Control Modes and Presets
When utilizing the dimmer's on-board controls, users have access to a dynamic range of tools
that control color and intensity, including 120+ pre-loaded color gel presets with daylight or
tungsten backing, source-matching presets, user-defined presets, CCT controls, and more.
V-Mount AC and DC Power Options
The Flex Cine Wireless DMX Dimmer is designed with a built-in V-mount to accept AC or DC
power. Pair with either the AC Adapter or 26V Lithium-Ion Battery to operate Flex LEDs easier
than ever before. User's can also power a 1' x 1' Bi-Color or Daylight LED mat via any compatible
14.4-14.8V V-mount battery.
Cutting-Edge Technology
This dimmer is equipped with Hybrid Pulse Width Modulation that allows Flex LED mats to be
dimmed down to 1% while maintaining a flicker-free output up to 960 frames per second. Mat
Sensing Technology detects which Flex LED mat is connected, specifies the required voltage,
and customizes the available dimmer controls. A built-in USB port allows for future firmware
updates.
Durable Lightweight Enclosure
This dimmer is constructed with a heavy-duty, lightweight aluminum enclosure for secure use and
travel. It can be mounted via the built-in ⅜"-16 and ¼"-20 threads or hung from a stand with the
removable d-ring lanyard. The dimmer also includes a user-replaceable WiFi antenna.
4
Included Components
●Flex Cine DMX Dimmer
●Flex Cine DMX Dimmer Case
●Flex Cine DMX Dimmer Lanyard
Overview
5
Warnings
●Use only with the Westcott Flex Cine AC Adapter and compatible batteries
●Keep away from fire and water
●Do not submerge in water
●Do not attempt to open or modify
●Do not short AC Adapter terminals
●Do not alter or change V-Mount plate or pins
●Do not overtighten connections
●Do not overtighten mounting threads
6
Updating Firmware
The Flex Cine Wireless DMX Dimmer is designed with a USB port (5V 1A) to allow for firmware updates.
Future updates may result in modified menu options and layouts.
1. Visit https://www.fjwestcott.com/7580 and scroll to the Support section. Find and download the
latest firmware ZIP file.
2. Unzip the file. Open the extracted folder.
3. Read the Changelog file.
4. Save the .BIN file to the root directory of a USB flash drive that’s been formatted using MS-DOS
(FAT). This does not have to be the only file on the flash drive, but it cannot be in a folder.
5. Move the dimmer’s power switch to the OFF position.
6. Plug the flash drive into the USB port located on the side of the dimmer.
7. Turn the power switch to the ON position.
8. After Westcott logo and version information appears, the unit will display “Updating” and a status
bar will appear.
9. When status bar completes, the new firmware version number will be displayed on the screen
and the dimmer will return to the main Menu.
Important Firmware Notes
●It’s recommended that the firmware update installation process be completed only when the
dimmer is attached to the Flex Cine Wireless DMX Dimmer AC Adapter or a fully-charged battery.
Loss of power during this process could render the dimmer inoperable and require professional
repair.
●The USB flash drive MUST be formatted for MS-DOS (FAT) file system. The dimmer will not
recognize the .BIN file on a USB drive formatted in Mac OS Extended or other file systems. See
your computer’s operating system external device formatting instructions for more details.
●Remove the USB flash drive before the next power cycle or unit will reload the firmware.
7
Powering the Wireless DMX Dimmer
●Flex Cine Mats require a Flex Cine Dimmer and power source for operation.
●Flex Cine RGBW Mats require a Flex Cine Wireless DMX Dimmer.
DMX Dimmer AC Adapter or 26V V-Mount Battery
All Flex Mats
14.4 or 14.8V V-Mount Battery
1' x 1' Daylight and 1' x 1' Bi-Color Mats
Connecting V-Mount Power Source
1. Ensure the dimmer is turned off.
2. Slide the power source toward the bottom of the dimmer until it clicks into the locked position.
Disconnecting V-Mount Power Source
1. Ensure the dimmer is turned off.
2. Push the V-Mount release button inwards and slide the power source towards the top of the dimmer
until it releases.
8
Connecting Flex Mats
Connecting a Flex Cine LED Mat
1. Ensure the dimmer is turned OFF.
2. Plug the Flex Cine mat’s TE-9 Pin connector into the TE-9 Pin receiver located on the top of the
Flex Cine Dimmer. Proper connection may require the connector to be turned until the pins align
and it easily inserts into the dimmer’s receiver.
3. Once connected, rotate the coupling ring ¾ clockwise on the cable connector to secure.
4. Connect the dimmer to a compatible power source. See the Power
section in this guide for compatibility and connecting details.
Connecting a Flex LED Legacy Mat
Original Flex mat owners can operate their original Flex LED mats with the Cine Wireless DMX Dimmer
when paired with a Legacy Adapter (sold separately). IMPORTANT: Legacy Adapters are mat specific. Do
not attempt to use the same legacy adapter for various Flex mat styles.
1. Ensure the dimmer is turned OFF.
2. Connect the adapters TE-9 Pin connector into the TE-9 Pin receiver on the dimmer, rotate the
coupling ring ¾ clockwise on the cable connector to secure.
3. Connect the Flex mat connector to the adapter.
4. Rotate the connector’s coupling ring clockwise to secure the connection.
5. Connect the dimmer to a compatible power source. See the Power section in this guide for
compatibility and connecting details.
Disconnecting a Flex Cine LED Mat
1. Ensure the dimmer is turned OFF.
2. Grasp the coupling ring and rotate counterclockwise ¾ turn.
3. Gently pull the cable connector straight out and away from the dimmer.
Disconnecting a Flex LED Legacy Mat
1. Ensure the dimmer is turned OFF.
2. Rotate the adapter’s coupling ring counterclockwise ¾ turn.
3. Gently pull the adapter straight out and away from the dimmer.
4. Disconnect the mat from the adapter.
Note: Never force entry or removal of the connectors.
9
Basic Operation, Switches & Controls
1. Once the preferred power supply is connected, locate the ON|OFF Power Switch located on the
rear top right of the dimmer. Turn the switch to the ON position.
2. The DMX Dimmer screen will display the Westcott logo and current firmware version before
displaying the dimmer user interface (UI) for controlling the attached Flex mat.
3. Once the main menu is visible on the screen, use the ▲ (Up) and ▼ (Down) buttons on the d-pad
to scroll through all menu options (additional menu options might be located off-screen). Menu
options may vary depending on the type of connected Flex mat and firmware version. Note: The
dimmer will restart to the screen last used
4. Once the desired menu option has the “>” symbol located next to it on the dimmer screen, press
the center OK button on the d-pad to confirm the menu selection, which will move to the next
screen.
5. Repeat Step 4 until the desired control screen is displayed.
6. At any time, return to previous dimmer control screen by holding
the OK button on the d-pad for 2 seconds.
On/Off Switch
Use this switch to power the dimmer on and off. When using the Flex Cine Wireless DMX Dimmer AC
Adapter, switching the dimmer to the OFF position will not turn off the AC adapter.
D-Pad Controls: Menu Screen
●The ▲ (Up) and ▼ (Down) buttons move the “>” symbol to the desired menu selection.
●The ► (Right) and ◄ (Left) buttons currently do not change the menu screen selections.
●The center OK button has 2 functions. Quick pressing the OK button confirms the selection.
Holding the OK button for 2 seconds goes to the previous screen.
D-Pad Controls: Mat Control Screen
●The ▲ (Up) and ▼ (Down) buttons move the “>” symbol to the attribute to change.
●The ► (Right) and ◄ (Left) buttons can be used to adjust the color temperature and/or intensity
(where applicable).
●The center OK button has 2 functions. Quick pressing the OK button confirms the selection.
Holding the OK button for 2 seconds goes to the previous screen.
10
Indice
