Westinghouse SE 6000 Manuale utente

Westinghouse

Security Electronics

an ISO 9001 certified company

5452 Betsy Ross Drive

Santa Clara, CA 95054-1184

(408) 727-5170

FA (408) 727-6707

P/N 66107919001, Rev. F

STANDARD

PRODUCT

MANUAL

ECURITY

ANAGEMENT

YSTEM

SE 6000

LIMITED WARRANTY

Westinghouse Security Electronics (WSE) warrants to the original user the equipment manufactured by WSE as

described herein (the equipment) to be free from defects in material and workmanship for a period of one year from

the date of purchase by such user or fifteen (15) months from the date of shipment from the factory, whichever

is sooner, provided:

I WSE has been notified within such period by return of any alleged defective equipment, free and clear

of any liens and encumbrances to WSE or its authorized Dealer at the address specified, transportation

prepaid; and

II the equipment has not been abused, misused or improperly maintained and/or repaired during such

period; and

III such defect has not been caused by ordinary wear and tear; and

IV such defect is not a result of voltage surges/brownouts, lightning, water damage/flooding, fire, explosion,

earthquakes, tornadoes, acts of aggression/war or similar phenomena; and

V accessories used as an integral to WSE systems have been approved by WSE (e.g., coaxial cables,

batteries, etc.); and

VI the equipment has been installed, the installation supervised or installation tested by an authorized WSE

dealer.

WSE's Proximity Command Keys are warranted for 5 years. WSE shall at its option, either repair or replace, free

of charge, the equipment found, upon WSE's inspection to be so defective, or if agreed upon, refund the purchase

price, less a reasonable allowance for depreciation, in exchange for the equipment. Magnetic Stripe Cards are

warranted as described by the manufacturer's warranty.

WSE makes no other warranty, and all implied warranties including any warranty of merchantability or fitness for

a particular purpose are limited to the duration of the expressed warranty period as set forth above.

WSE's maximum liability hereunder is limited to the purchase price of the equipment. In no event shall WSE be

liable for any consequential, indirect, incidental or special damages of any nature arising from the sale or use of

the product.

Some states do not allow limitations on incidental or consequential damages or how long an implied warranty lasts,

so the above limitations may not apply. This warranty gives specific legal rights; however, other rights which vary

from state to state, may pertain.

IMPORTANT

The information provided in this manual is believed to be accurate and reliable. However, Westinghouse Security

Electronics (WSE) assumes no responsibility for any errors that may appear. Possession of this manual does not

imply the granting of licenses to make or sell equipment or software constructed according to descriptions

provided.

iii

TABLE OF CONTENTS

SECTION 1: INTRODUCTION .................................................... 1-1

MANUAL ORGANIZATION ............................................................................... 1-1

System Main Menu ..................................................................................... 1-1

Documentation Methods ............................................................................. 1-2

DEFINITIONS ................................................................................................... 1-2

General ....................................................................................................... 1-2

System Hardware — Devices ..................................................................... 1-3

System Software ......................................................................................... 1-5

Principal System Functions ......................................................................... 1-6

SAMPLE SYSTEM ............................................................................................ 1-7

CREATING THE DATABASE ............................................................................ 1-8

BASIC SYSTEM USAGE .................................................................................. 1-9

Logging On ................................................................................................. 1-9

System Screens ........................................................................................ 1-10

Application Screens .................................................................................. 1-10

SCREEN EXAMPLES ..................................................................................... 1-11

USING SCREENS AND FIELDS ..................................................................... 1-12

Selecting Screens ..................................................................................... 1-12

Moving Between Data Fields ..................................................................... 1-12

Moving to Prior Screens ............................................................................ 1-13

FINDING, ADDING, AND STORING DATA ..................................................... 1-13

Finding Data .............................................................................................. 1-13

Searching With Partial Information ............................................................ 1-13

Adding / Changing Data ............................................................................ 1-14

Storing Data .............................................................................................. 1-14

DELETING RECORDS ................................................................................... 1-14

ZOOM FEATURE ............................................................................................ 1-15

Cancel Zoom ............................................................................................ 1-15

MISCELLANEOUS INFORMATION ................................................................ 1-15

LOGGING OFF ............................................................................................... 1-15

SHUTTING DOWN ......................................................................................... 1-16

RESTARTING ................................................................................................. 1-16

Automatic Restart ..................................................................................... 1-16

Manual Restart.......................................................................................... 1-16

SYSTEM SCREEN TREES ............................................................................. 1-17

Appendix A: System Screen Trees ........................................................... 1-17

Appendix B: System Screen Hierarchies................................................... 1-17

OPTIONAL FEATURES .................................................................................. 1-17

SECTION 2: MONITOR SECURITY ACTIVITY .......................... 2-1

INTRODUCTION ............................................................................................... 2-1

SECTION ORGANIZATION .............................................................................. 2-1

FUNCTION KEYS ............................................................................................. 2-2

DATA ITEM SELECTION .................................................................................. 2-2

CONTROL FUNCTIONS MENU ....................................................................... 2-2

Pollers ......................................................................................................... 2-2

Devices ....................................................................................................... 2-3

Locks .......................................................................................................... 2-4

Input Points ................................................................................................. 2-5

Output Points .............................................................................................. 2-5

Doors .......................................................................................................... 2-6

Select Zone ................................................................................................. 2-6

REVIEW TRANSACTIONS (FULL SCREEN) ................................................... 2-7

ALARM SERVICING ......................................................................................... 2-8

REAL TIME CONTROL MAPS .......................................................................... 2-8

CONTROL PROJECTS .................................................................................... 2-9

ABORT TIMERS ............................................................................................... 2-9

OTHER FUNCTIONS ........................................................................................ 2-9

Printer Control ............................................................................................. 2-9

Forgive Passback ..................................................................................... 2-10

Manual Access Granted ............................................................................ 2-10

Force Table Download .............................................................................. 2-10

Remote Devices ....................................................................................... 2-11

Building Modes ......................................................................................... 2-11

Full Screen Monitoring .............................................................................. 2-12

MISCELLANEOUS INFORMATION ................................................................ 2-12

Disk Almost Full Warning .......................................................................... 2-12

Status Screen Function Timeout ............................................................... 2-13

Alarm Servicing — No Activity Timeout ..................................................... 2-13

Monitoring Security - Passwords ............................................................... 2-14

Modified Usage of Invalid Facility Code Log .............................................. 2-15

SECTION 3 SECURITY REPORTS ............................................ 3-1

INTRODUCTION ............................................................................................... 3-1

POINT HISTORY REPORT............................................................................... 3-2

Point History — Sample Report .................................................................. 3-2

KEYHOLDER HISTORY REPORT.................................................................... 3-2

Keyholder History — Sample Report ........................................................... 3-3

TRANSACTION HISTORY REPORT ................................................................ 3-3

Transaction History — Sample Report ........................................................ 3-4

ACCESS CONTROL ARCHIVE REPORT ........................................................ 3-4

ALARM SERVICING REPORT ......................................................................... 3-4

Alarm Servicing — Sample Report.............................................................. 3-5

PASSBACK ZONE REPORT ............................................................................ 3-5

Passback Zone — Sample Report .............................................................. 3-6

DOWNLOAD STATUS REPORT ...................................................................... 3-6

Download Status — Sample Report ............................................................ 3-7

KEYHOLDER ZONE REPORT ......................................................................... 3-8

Keyholder Zone — Sample Report ............................................................. 3-8

EVENT / POINT REPORT ................................................................................ 3-8

Event / Point — Sample Report .................................................................. 3-9

REALTIME PASSBACK ZONE REPORT .......................................................... 3-9

REALTIME PASSBACK DETAIL — SAMPLE REPORT .................................. 3-10

SECTION 4 MASTER FILE ENTRY ............................................ 4-1

INTRODUCTION ............................................................................................... 4-1

Screen Access ............................................................................................ 4-1

KEYHOLDERS .................................................................................................. 4-2

Keyholder Entry—Page 1 [key_entr] ........................................................... 4-2

Keyholder Entry—Page 2 [key1entr] ........................................................... 4-4

Keyholder Access Entry [empgentr] ............................................................ 4-5

Project Assignment [epj_entr] ..................................................................... 4-6

COPY KEYHOLDERS ....................................................................................... 4-7

Copy Keyholder Information ........................................................................ 4-7

ACCESS ASSIGNMENT ................................................................................... 4-8

Keyholder Access Assignment [egrpentr] ................................................... 4-8

COPY KEYHOLDER ACCESS [ERGCOPY] ..................................................... 4-8

ACCESS DEFINITION ...................................................................................... 4-9

Access Code Entry [acdsentr] ..................................................................... 4-9

Access Group Entry [agdsentr], [agrpentr] ................................................ 4-11

Access Override Entry .............................................................................. 4-13

Failsoft Entry ............................................................................................. 4-14

Project Entry [prj_entr], [prd_entr] ............................................................. 4-14

TIME CODES [TMCDENTR] ........................................................................... 4-16

HOLIDAYS [HOL_ENTR] ................................................................................ 4-16

TENANTS [TENTENTR] ................................................................................. 4-17

INSTRUCTIONS [INSTENTR] ........................................................................ 4-17

HARDWARE CONFIGURATION [CONFMENU] ............................................. 4-18

Zones [zoneentr] ....................................................................................... 4-18

Areas [areaentr], [areaentr1] ..................................................................... 4-19

Pollers [pol_entr] ....................................................................................... 4-19

Devices ..................................................................................................... 4-21

Device Entry [dev_entr] — All Device Types ............................................. 4-22

SE NexSentry Device Configuration Entry [nexsentr] ................................ 4-26

Readers .................................................................................................... 4-31

Reader Entry [rdr_entr] ............................................................................. 4-32

Points [pnt_entr] ........................................................................................ 4-39

Auto Opens / Activates.............................................................................. 4-42

Device Report Definition [rdefentr] ............................................................ 4-43

SE 422 PIN Definition ............................................................................... 4-43

SE 422 Hardware Definition ...................................................................... 4-44

Dialer Entry ............................................................................................... 4-45

Site Entry Definition ................................................................................... 4-46

ABA Configuration Entry ........................................................................... 4-47

DKR Configuration Entry ........................................................................... 4-48

USER-DEFINED INFORMATION .................................................................... 4-49

MAPS .............................................................................................................. 4-50

Map Drawing Commands and Descriptions .............................................. 4-50

SECTION 5: MASTER FILE REPORTS ..................................... 5-1

INTRODUCTION ............................................................................................... 5-1

ADDITIONAL INFORMATION ........................................................................... 5-2

KEYS MASTER ................................................................................................. 5-2

Keyholder Quick List — Sample Report ...................................................... 5-3

Keyholder Holder Master Report — Sample Report .................................... 5-3

ACCESS ASSIGNMENTS ................................................................................. 5-4

Keyholder Access Assignment .................................................................... 5-4

Keyholder Access Assignment: Regular — Sample Report ........................ 5-4

Keyholder Access Assignment: Extended — Sample Report...................... 5-5

Reader Access Assignment ........................................................................ 5-5

Reader Assignment — Sample Report ....................................................... 5-5

ACCESS DEFINITION ...................................................................................... 5-6

Access Code Master ................................................................................... 5-6

Access Group Master ................................................................................. 5-6

Access Override ......................................................................................... 5-7

Intelligent Fail Soft Report ........................................................................... 5-7

Project Report ............................................................................................. 5-8

Keyholder Project Report ............................................................................ 5-9

Reader Project Report .............................................................................. 5-10

TIME CODES .................................................................................................. 5-10

HOLIDAYS ...................................................................................................... 5-11

TENANTS ....................................................................................................... 5-11

Tenants — Sample Report ........................................................................ 5-12

COMPANY, DEPT, LOCATION, JOB CAT ....................................................... 5-12

Company, Dept, Location, Job Cat — Sample Company Report .............. 5-12

INSTRUCTIONS ............................................................................................. 5-12

Sample Instructions .................................................................................. 5-13

MAPS .............................................................................................................. 5-13

Sample Report — Map Information ........................................................... 5-13

DEVICE CONFIGURATION REPORTS .......................................................... 5-13

Zones ........................................................................................................ 5-13

Zones — Sample Report .......................................................................... 5-14

Pollers ....................................................................................................... 5-14

Pollers — Sample Report.......................................................................... 5-14

Devices ..................................................................................................... 5-14

Devices — Sample Report ........................................................................ 5-15

Readers .................................................................................................... 5-15

Readers — Sample Report ....................................................................... 5-16

Points ........................................................................................................ 5-16

Points — Sample Report........................................................................... 5-16

Auto Opens / Activates.............................................................................. 5-17

Auto Open / Activate — Sample Report .................................................... 5-17

808 Report Definition ................................................................................ 5-17

808 Report Definition —Sample Report .................................................... 5-17

808 Device Configuration .......................................................................... 5-18

808 Device Configuration — Sample Report ............................................. 5-18

Dialers ....................................................................................................... 5-18

Dialers — Sample Report ......................................................................... 5-18

Site Definition ............................................................................................ 5-18

Site Definition — Sample Report ............................................................... 5-19

ABA Configuration .................................................................................... 5-19

ABA Configuration — Sample Report ....................................................... 5-19

DKR Configuration .................................................................................... 5-20

DKR Configuration — Sample Report ....................................................... 5-20

SE 422 PIN Master Report ........................................................................ 5-20

SE 422 PIN Master Report — Sample ...................................................... 5-21

132-COLUMN REPORT DISPLAY .................................................................. 5-21

vii

SECTION 6: SYSTEM ADMINISTRATION ................................. 6-1

INTRODUCTION ............................................................................................... 6-1

SECTION ORGANIZATION .............................................................................. 6-1

ADDITIONAL INFORMATION ........................................................................... 6-2

ADD USERS [ADDUSERS] ............................................................................... 6-2

MODIFY PASSWORDS [MOD_PASS].............................................................. 6-4

PROGRAM SECURITY [SEC_MENU] .............................................................. 6-5

Program Security Level Entry [pgacentr] ..................................................... 6-5

Program Security Entry Definition [pg1_entr] .............................................. 6-5

Copy Security [mnaccopy]........................................................................... 6-6

Security Master List [pgacrprt]..................................................................... 6-6

DISPLAY ALL VALID LOGINS [SHOWUSER] .................................................. 6-7

DISPLAY CURRENT DATE AND TIME [SHOWDATE] ..................................... 6-7

DISPLAY ALL USERS WHO ARE LOGGED IN [SHOWWHO] ......................... 6-7

PURGE A PENDING REPORT [PURGRPRT] .................................................. 6-8

ENABLE TERMINALS FOR GLOBAL BEEPING [BEEPENTR] ....................... 6-8

SYSTEM CONFIGURATION (SYCLMENU) ...................................................... 6-8

Control File Maintenance [ctrlentr] .............................................................. 6-8

Events [evenentr] ........................................................................................ 6-9

Tasks [taskentr] ......................................................................................... 6-10

Task Event / Master Report [taskrprt] ........................................................ 6-12

Transactions [tranentr] .............................................................................. 6-12

DATABASE MAINTENANCE [DB_MENU] ...................................................... 6-14

Display Database Statistics [dbstats] ........................................................ 6-14

Perform Backup [bkup] ............................................................................. 6-14

Alarm Transaction Clean Up [alrmcln] ....................................................... 6-16

Journal Archive [jourarch] ......................................................................... 6-16

Journal Reporting [jourrprt] ....................................................................... 6-16

Special Journal Reporting [josprprt] .......................................................... 6-16

KEYHOLDER LOADING [LOADMENU] .......................................................... 6-17

ID SECURITY MAINTENANCE [ID_MENU] .................................................... 6-17

ID Security User Entry [ID1_ entr] ............................................................. 6-17

ID Security Group Entry [ID2_ entr] ........................................................... 6-18

ID Security Report [ID1_ rprt] ................................................................... 6-18

MISCELLANEOUS INFORMATION ................................................................ 6-19

Adjustable Baud Rate—708P / 800 Pollers ............................................... 6-19

708P REX Shunt Time Reset .................................................................... 6-19

Key Inventory [invtmenu] ........................................................................... 6-20

Inventory Status Code Menu [statentr] ...................................................... 6-20

Key Inventory Status Code Report [statrprt] .............................................. 6-20

Key Inventory Entry [cdinentr] ................................................................... 6-21

Key Inventory Report [cdinrprt] .................................................................. 6-21

PARKING STICKERS [STKRMENU] ............................................................... 6-22

Parking Sticker Entry [stkrentr] .................................................................. 6-22

Parking Sticker Interactive Display [stkrrprt1] ............................................ 6-22

Parking Sticker Master Report [stkrprt] ..................................................... 6-23

SECTION 1: INTRODUCTION 1-1

SECTION 1

INTRODUCTION

MANUAL ORGANIZATION

This manual follows the order of the seven standard product items in the system main menu, with

the Key Inventory and Parking Stickers items merged into the System Administration section:

•Section 2: Monitor Security Activity

•Section 3: Security Management Reports

•Section 4: Master File Entry

•Section 5: Master File Reports

•Section 6: System Administration

System Main Menu

The system main menu is the departure point for accessing all other system screens (main menu

screens may vary according to options purchased).

1-2 SECTION 1: INTRODUCTION

Documentation Methods

To avoid repetition and to reduce document size, detailed explanations for the system's principal

data items are given only in Section 4: Master File Entry, which is used when creating the system

database. For introductory information concerning the data items, see Definitions below.

Further, with the exception of the screens presented in Basic System Usage in this section, and

the introductory menu screens for Sections 2 through Section 5, all other screens throughout this

manual are limited to the particular screen area being discussed (i.e., full screens are not shown).

n some cases, screen presentations are unnecessary and are not used.

DEFINITIONS

General

Access Code. A group of readers and time codes assigned to keyholders indicating where and

when entry is permitted. Note that access codes can be associated with a down loadable device

ID for distributed processing or they can be associated with the host computer for central

processing.

Access Group. A group of access codes created to facilitate the assignment of similar access

privileges to a large number of keyholders.

Alarm Contact. A dry-contact switch, indicating input conditions for smoke detectors, heat /

moisture sensors, taut-wire fences, window bands, etc.

Company. Keyholder's employer.

Department. A particular group within a company to which a keyholder is assigned.

Device. A controlling element of the system which communicates with the computer and the

system points (see System Hardware in this section).

Event. Any defined transaction which requires action by an access control system. Examples:

keyholder entry request, activated alarm.

Job Category. A code assigned to a keyholder indicating the employee group category.

Key Number. Keyholder's security key number. Unlike the keyholder ID, this number may be

changed (e.g., if a key is lost) or removed (e.g., if an employee leaves the company).

Keyholder. Employee or visitor who holds a valid security card for an access control system.

SECTION 1: INTRODUCTION 1-3

Keyholder ID. Keyholder's ID number. The unique ID number is used by the computer to keep

track of all activity for that person. Once entered, the keyholder ID cannot be changed.

Location. Location of the office or branch of the company to which a keyholder is assigned.

Tenant. One of several distinct occupants of a facility with a single access control system. The

data for each tenant using the system appears separate from that of all other tenants.

Time Code. A definition of the time of day, and the days of the week, when events are to occur.

Used in assigning access privileges, performing scheduled tasks, and monitoring points.

Trace. A realtime (as it is happening) display of events for a specific keyholder or point.

Transactions. System responses to events are called transactions. The most frequently seen

is ACCESS GRANTED, which means a valid key was presented to a reader at an approved door, at

an approved time, and that the keyholder was granted entry.

Zones. Selected locations and device types may be grouped into zones to facilitate system

control. For reporting purposes, zones may be grouped into areas. If zones are created, anti-

passback instructions or controls may be assigned (see Access Control Functions in this section).

System Hardware — Devices

The principal device is the host computer. The host controls all data maintained in the database,

records all system activity, and is the central point for all reporting activity. The host communicates

with all system devices, or may communicate via an LC or RLC computer (see Optional Features

in this section).

Various other devices are included in access control systems. Simple systems may use only

contact switches and a single reader type. More complex systems may use several reader types

and many other devices. Devices are classified as input or output units depending on their

particular function. Input devices are detectors and identifiers; output devices are alarms and

control units.

Devices — Microprocessor Units

Access Control Units (ACUs). In conjunction with the host or local computer, the ACUs are used

to control door access and maintain status. Example ACUs are: WSE NexSentry, 422, 708P,

and 8xx-series. The WSE 708P units are called simple devices because they do not make access

decisions (decisions are made by host). The NexSentry, 422, and 8xx-series units are called

intelligent devices because they can make access decisions independent of the host.

Biometric Hand Readers. Devices such as fingerprint analyzers, hand geometry analyzers,

retina scanners, and other devices which check body characteristics.

Indice

Altri manuali Westinghouse Sistema di sicurezza

Westinghouse

Westinghouse WSS55O8 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente