Westover FBE Microscope with HD3 Display Manuale utente

FBE Microscope

User Manual

ZP-PKG-0367

REV 1

with HD3 Display

18421 Bothell-Everett Hwy.

Suite 110

Mill Creek, WA 98012

Phone: (800) 304-3202 or (425) 398-1298

Fax: (425) 398-0717

E-mail: info@westoverscientic.com

Web: www.westoverber.com

CERTIFICATION

Tested Equipment

All pre-qualification tests were performed internally at Westover Scientific, Inc., while all final

tests were performed externally at an independent, accredited laboratory. This external testing

guarantees the unerring objectivity and authoritative compliance of all test results. Westover

Scientific’s Commerce and Government Entities (CAGE) code under the North Atlantic Treaty

Organization (NATO) is 0L8C3.

FCC Information

Electronic test equipment is exempt from Part 15 compliance (FCC) in the United States.

European Union

Electronic test equipment is subject to the EMC Directive in the European Union. The

EN61326 standard prescribes both emission and immunity requirements for laboratory,

measurement, and control equipment. This unit has been tested and found to comply

with the limits for a Class A digital device.

Independent Laboratory Testing

This unit has undergone extensive testing according to the European Union Directive and

Standards.

USER MANUAL Westover Scientific

Certification FBE Microscope with HD3 Display

USER MANUAL Westover Scientific

Contents FBE Microscope with HD3 Display

INTRODUCTION ...............................................................................................................................................................................4–5

Key Terms & Concepts...................................................................................................................................................................4

Fiber Connectors.........................................................................................................................................................................4

Simplex Fiber, Dirt & Contamination, Scratches........................................................................................................5

Dirt & Contamination ...............................................................................................................................................................5

Scratches .........................................................................................................................................................................................5

FBE PROBE MICROSCOPE.................................................................................................................................................................6

Overview................................................................................................................................................................................................6

Specications................................................................................................................................................................................6

Controls..................................................................................................................................................................................................6

FBET PROBE TIPS....................................................................................................................................................................................7

FBET Tip Categories ...................................................................................................................................................................7

HD3 DISPLAY.................................................................................................................................................................................... 8–11

Specications................................................................................................................................................................................8

Battery.....................................................................................................................................................................................................9

Charging the Battery.................................................................................................................................................................9

Changing the Battery ...............................................................................................................................................................9

Power Modes .............................................................................................................................................................................11

Hanging Accessory.................................................................................................................................................................11

CONTACT INFORMATION...............................................................................................................................................................12

CONTENTS

INTRODUCTION

Inspection of fiber optic interconnects is essential for the optimal performance and longevity

of fiber optic connectivity. Throughout their lives, fiber connectors must be inspected, analyzed

and cleaned to maintain an acceptable level of functionality. By developing and introducing the

equipment and software to inspect, analyze and clean fiber connectors, Westover Scientific is

able to provide a comprehensive solution for the performance and preservation of fiber optic

interconnects.

KEY TERMS & CONCEPTS

Fiber Connectors

Fiber connectors enable fiber-to-fiber

mating by aligning the two optical

fibers. Fiber connectors come in various

types and have different characteristics

for use in different applications. The

main components of a fiber connector

are detailed below:

Body

Houses the ferrule that secures the fiber in place;

utilizes a latch and key mechanism that aligns the

fiber and prevents the rotation of ferrules of two

mated connectors

Ferrule

Thin cylinder where the fiber is mounted and acts as

the fiber alignment mechanism; the end of the fiber

is located at the end of the ferrule

Fiber

Cladding

Glass layer surrounding the core, which

prevents the signal in the core from escaping

Core

The critical center layer of the ber; the conduit

that light passes through

Simplex Fiber

Core

Cladding

Ferrule

USER MANUAL Westover Scientific

Introduction FBE Microscope with HD3 Display

Fiber Connector (Simplex)

Ferrule

Body

Optical Fiber

Fiber

Body

Ferrule

USER MANUAL Westover Scientific

Simplex Fiber, Dirt & Contamination, Scratches FBE Microscope with HD3 Display

SIMPLEX FIBER CONNECTORS

A simplex fiber connector contains a single fiber located

in the center of the ferrule. Common types include SC,

LC, FC and ST.

Ferrule Fiber

Simplex Fiber

Dirt & Contamination

If dirt particles get on the core surface the light becomes blocked, creating unacceptable insertion

loss and back-reflection. Furthermore, those particles can permanently damage the glass interface,

digging into the glass and leaving pits that create further back-reflection if mated. Also, large

particles of dirt on the cladding layer and/or the ferrule can introduce a barrier that prevents

physical contact and creates an air gap between the fibers. To further complicate matters, loose

particles have a tendency to migrate.

Scratches

Scratches are typically created during polishing, cleaning or mishandling fiber connectors.

Scratches that touch the core are problematic because they create back reflection.

Clean Fiber Dirt Contamination Pit/Chip Contamination Scratch

Clean Connection

CLEAN CONNECTION

CoreCladding

Light Transmitted

CoreCladding

Back ReectionLight Transmitted Insertion Loss

DIRT

Dirt Reection

Focus Control

The Focus Control on the probe allows the user to adjust focus of the live fiber end-face image.

USER MANUAL Westover Scientific

FBE Probe: Controls FBE Microscope with HD3 Display

FBE PROBE MICROSCOPE

Hardwired to Westover’s display

Recirculating Focus Control for

adjusting focus on ber end-face image

Requires appropriate FBET inspection tip

•

Probe Specications

Dimensions 14.0 cm x 4.6 cm x 4.4 cm

Weight 180 g

Cord Length 240 cm coil

Camera Type 1/3” CMOS Sensor

Video Output NTSC

Light Source Blue LED, 100,000+ hr life

Lighting Technique Coaxial

Power Source from display device

Westover’s FBE Probe Microscope is a portable video microscope with an integrated HD3 Display

that is used to inspect fiber optic connectivity. The FBE Probe is designed to provide an economical

solution for inspecting both “male” and “female” (e.g., bulkhead) ends of an optical interconnect.

The probe is specially designed to fit and operate comfortably and easily in-hand, allowing the user

to inspect hard-to-reach connectors that are installed on the backside of patch panels or inside

hardware devices. This eliminates the need to access the backside of patch panels or disassemble

hardware devices prior to inspection. The probe is fully assembled and is powered by the display

device. The only assembly required by the user is the installation of the appropriate inspection tip.

FBET-SC

Focus Control

recirculating focus wheel adjusts focus on the display screen

Features

Inspection Tip

The FBE Probe Microscope uses a select group of FBET inspection tips. These tips are

interchangeable and allows the probe to interface with different types of fiber connectors. Below

are three common types of FBET tips that are available at Westover.

FBET INSPECTION TIPS

FBET TIP CATEGORIES*

Standard Bulkhead Tips

Standard bulkhead tips allow the user to inspect the fiber

end-face on the “female” ends of the bulkhead (e.g., inside

hardware devices or on the back side of patch panels).

* FBE Probes are only compatible with FBET tips.

Standard Patch Cord Tips

Standard patch cord tips allow inspection of “male” ends of

a fiber connection (e.g., patch cords, pigtails, etc.). “Universal”

tips include the FBET-U25M, compatible with 2.5mm ferrules

(e.g., FC, SC, ST ) and the FBET-U12M, used to inspect 1.25mm

ferrules (e.g., LC, MU).

APC Tips

APC tips are designed with an angle that complements the

end-face of an APC polish fiber connector. This allows the

entire fiber image to stay in focus during inspection.

FBET-SC (Bulkhead)

FBET-U25M (Patch Cord)

FBET-SCA

FBET-LC (Bulkhead)

FBET-U12M (Patch Cord)

USER MANUAL Westover Scientific

FBET Inspection Tips FBE Microscope with HD3 Display

USER MANUAL Westover Scientific

HD3 Display: Overview FBE Microscope with HD3 Display

The HD3 Display combines performance and value in

a small form-factor device. It is designed for ultimate

portability and incorporates features that enable

comfort and efficiency. It features a 1.8” TFT LCD screen

and an innovative GripSwitch™ that saves battery life by

providing instant-ON functionality when both sides are

pressed and turning OFF when released. A continuous-

ON feature is also available for hands-free operation.

With its durable design and ruggedized enclosure, the

HD3 ensures excellent performance and portability in

real-life field applications.

HD3 DISPLAY

1.8” TFT LCD display

Ruggedized, drop-tested enclosure

Power-saving GripSwitch™ designed for

comfort and eciency; provides instant-ON

when gripped in-hand and turns power OFF to

save battery life when released

Built-in rechargeable NiMH (nickel metal

hydride) battery pack

3-hour run time on continuous-ON mode,

dramatically longer run time when utilizing

GripSwitch™ mode

Low battery warning LED (when lit, remaining

battery life is approximately 30 minutes)

AC adapter (power supply 100–240VAC/

12VDC) for alternate power source and for

charging NiMH battery

•

HD3 Display Specications

Dimensions 10 cm x 7.2 cm x 4.3 cm

Weight 230 g (w/ FBE Probe)

Video Display 1.8”TFT LCD

Power Source

Built-in rechargeable NiMH

(nickel metal hydride),

800mAH battery or AC

adapter (100-200VAC/

12VDC)

Power Mode

• ON (continuous ON)

• GripSwitch™

(power saving mode)

• OFF/CHARGE

Run Time

• ~3 hours continuous ON

• Extended run time with

use of GripSwitch™

Features

USER MANUAL Westover Scientific

HD3 Display: Charging and Changing Battery FBE Microscope with HD3 Display

Changing the Battery

Unscrew the hex screw on the battery compartment with the

hex key (included).

Disconnect and remove the battery.

Connect and install the new battery, running the wires around

the battery.

Reattach and secure the battery compartment with the hex

screw.

Switch the power mode switch to the OFF/

CHARGE position.

Connect the AC adapter/charger to the display

and plug into wall socket.

The LED on the AC adapter/charger will

illuminate red when charging and green when

complete.

Charging the Battery

IMPORTANT: Charge the battery for ~4 hours before using the battery power for the rst time.

WARNING: Use ONLY the AC adapter/charger provided to power the display and charge the battery.

charging charge

complete

RED GREEN

USER MANUAL Westover Scientific

HD3 Display: Controls FBE Microscope with HD3 Display

Probe Input

FBE Probe hardwired

Low Battery Indicator

when lit, remaining battery life = 30 minutes

1.8”TFT LCD Screen

GripSwitch™

press both sides to turn power ON and release to turn power OFF

AC Power Input

alternative AC power and battery charger input

Power Mode Selector

ON Mode

for continuous ON

GripSwitch™ Mode

designed to save battery life

OFF/CHARGE Mode

to turn power OFF or to CHARGE battery

•

CONTROLS

Accessory Connection

Hex Screw

remove to access battery compartment

Indice

Altri manuali Westover Microscopio

Westover

Westover FBP Series Manuale utente

Manuali Microscopio popolari di altre marche

Thermo Scientific

Thermo Scientific Nicolet iN10 Guida

National

National DC3-163 Manuale utente

KERN Optics

KERN Optics OPE-1 Manuale utente

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuale utente

Prior

Prior Lux POL Manuale utente

Opitec

Opitec Smartscoop 115615 Manuale utente

KERN

KERN OPO-1 Manuale utente

Topcon

Topcon SP-1P Manuale utente

Motic

Motic PA43 Manuale utente

Leica

Leica DVM5000 Guida utente

MshOt

MshOt MZ62 Manuale utente

KERN Optics

KERN Optics OZR-5 Manuale utente

VWR

VWR VisiScope 384 Series Manuale utente

Nikon

Nikon ECLIPSE E200 POL Manuale utente

Leica

Leica DI C800 Manuale

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

Olympus

Olympus SZ61 Manuale utente