Whirlpool ECKMF95 Manuale utente

INSTALL THE ICE MAKER

Please replace current Page 9 in the Installation Guide with this insert.

Top/Bottom Freezer Models

IMPORTANT:

■Depending on your model, you will have one of three styles of

connection. Read and follow the instructions specific to your

model.

■You will be working inside the freezer compartment.

Access Water Fill Tube and Wiring Harness

Style 1 - Open-Top Fill Tube with Wiring Cover

1. Remove the screw from the ice maker wiring cover.

2. Squeeze the top and bottom to release the snaps along the

top edge of the cover. Remove and discard the cover.

3. Pull the 4-wire ice maker harness out from behind the back of

the freezer as far as possible, and hang it over the edge of the

cutout.

NOTE: Do not remove any other wiring.

Style 2 - Flat Wiring Cover

1. Remove the screw from the ice maker wiring cover.

2. Unhook the tab on the right-hand side of the cover and

remove the wiring cover.

3. Look at the back of the wiring cover and locate the grooved

lines. Using pliers, bend the areas inside the grooved lines

back and forth until they break away from the cover.

4. Pull the 4-wire ice maker harness out from behind the back of

the freezer as far as possible, and hang it over the edge of the

cutout.

NOTE: Do not remove any other wiring.

Style 3 - Evaporator Cover Only

1. Remove the four plastic plugs to access the screws. Remove

the four screws. Set aside.

2. Remove the evaporator cover by disengaging it from the side

snaps.

NOTE: The evaporator cover has a plastic foam backing.

3. Punch through both the plastic foam backing and plastic

evaporator cover where indicated by the indentations on the

back of the cover.

4. Remove and discard the circular and rectangular cutouts to

create holes for the fill tube and wire harness to pass through.

W10519544A

A. Mounting hole

B. Open top fill tube

C. Snaps

D. Cover

E. Snap

F. Hex screw

A. Mounting hole

B. Hex screw

C. Tab

D. Wiring cover

E. Break off and discard.

5. Pull the 4-wire ice maker harness out from behind the back of

the freezer as far as possible, and hang it over the edge of the

cutout.

NOTE: Do not remove any other wiring.

Install the Fill Tube

14 to 18 Cubic Foot Top Freezer and Bottom Freezer and

11 Cubic Foot (Style 3 - Evaporator Cover) Models

1. Locate the fill tube and the round foam gasket from the ice

maker kit. Slide the gasket over the end of the fill tube.

NOTE: The gasket may already be installed on the fill tube.

2. With the spout facing downward, insert the other end of the fill

tube into the hole in the back of the freezer.

3. Using two ¹⁄₂" hex head sheet metal screws, fasten the fill tube

to the freezer.

11 Cubic Foot Top Freezer (Style 1 and Style 2) Models

1. Insert the bracket fill tube into the holes in the back of the

freezer compartment.

2. Insert the fill tube into the hole in the bracket fill tube. Twist the

fill tube until the spout is locked into place between the ribs of

the bracket fill tube.

3. Using two ¹⁄₂" hex head sheet metal screws, fasten the

bracket fill tube to the back of the freezer.

Replace the Cover

Style 1 - Open Top Ice Maker Fill Tube with Wiring Cover

■Do not replace the cover.

Style 2 - Flat Wiring Cover

■Thread the wiring harness through the slot and place the

cover over the fill tube.

■Hook the tab in the side of the cover into the slot in the back

of the freezer. Using the hex screw removed earlier, fasten the

cover to the freezer.

Style 3 - Evaporator Cover Only

■Thread the wiring harness through the cutout and place the

evaporator cover over the fill tube.

■Using the screws and plastic plugs removed earlier, fasten the

cover to the freezer.

A. Plastic plugs and screws

B. Fill tube

C. Wire harness

A. Hex head sheet metal screws

B. Spout

C. Foam gasket

D. Fill tube

B C DA

A. Hex head sheet metal screws

B. Spout

C. Fill tube

D. Ribs

E. Bracket fill tube

B C EDA

Printed in Mexico

Altri manuali Whirlpool Macchina per il ghiaccio

Whirlpool

Whirlpool GI15NDXZB Manuale utente

Whirlpool

Whirlpool GI15NFLTS - Ice Maker Manuale utente

Whirlpool

Whirlpool GI15NDXZQ0 Manuale utente

Whirlpool

Whirlpool GI1500XHS Manuale utente

Whirlpool

Whirlpool GI1500XH Istruzioni utente

Whirlpool

Whirlpool GI15NFRXB0 Manuale utente

Whirlpool

Whirlpool GI15NFLTS - Ice Maker Manuale utente

Whirlpool

Whirlpool W11390949A Manuale utente

Whirlpool

Whirlpool VERSA CUBER CH E-5R Manuale utente

Whirlpool

Whirlpool GI15NDXZB Manuale utente

Whirlpool

Whirlpool Automatic Ice Maker Manuale utente

Whirlpool

Whirlpool K20 Manuale operativo

Whirlpool

Whirlpool ECKMF-64 Manuale utente

Whirlpool

Whirlpool EC5100 Manuale utente

Whirlpool

Whirlpool GI15NFRT Manuale utente

Whirlpool

Whirlpool W10206421B Manuale utente

Whirlpool

Whirlpool R-106 Guida all'installazione

Whirlpool

Whirlpool GI15NDXTB4 Manuale utente

Whirlpool

Whirlpool AGB 024/01/G/WP Manuale utente

Whirlpool

Whirlpool 50 Manuale utente

Whirlpool

Whirlpool GI15NDXXS1 Manuale utente

Whirlpool

Whirlpool GI15NFLTB1 Manuale utente

Whirlpool

Whirlpool GI15NDXZB Manuale utente

Whirlpool

Whirlpool ECKMF-83 Manuale utente

Manuali Macchina per il ghiaccio popolari di altre marche

Hoshizaki

Hoshizaki KMD-460MWJ Manuale utente

Sub-Zero

Sub-Zero 315I Istruzioni per l’uso

Unold

Unold 48945 Manuale utente

Kenmore

Kenmore 2217402A Manuale utente

Cornelius

Cornelius WM600 Istruzioni operative

GE XPIO43SCSS Manuale utente

Hoshizaki

Hoshizaki KMD-901MAH Manuale utente

Whynter

Whynter FIM-450HA Manuale utente

U-Line

U-Line UMCR014-SC01A Manuale di installazione

Andrew James

Andrew James AJ000522 Manuale utente

Scotsman

Scotsman CME1356 Manuale utente

Scotsman

Scotsman ACM 25 Manuale utente

Kärcher

Kärcher IP 120 Manuale utente

U-Line

U-Line SS1095 Manuale utente

Maytag

Maytag MIM1554WRS - Ice Maker Manuale utente

Hoshizaki

Hoshizaki KM-630MAH Manuale utente

Princess

Princess Yonanas Manuale utente

Unold

Unold 48946 Manuale utente