Whistler WIC-5000 Manuale utente
TABLE OF CONTENTS
Welcome..............................................................................1
Introduction.........................................................................2
Packing List.........................................................................2
FeatureDescription............................................................3
Installation...........................................................................4
Operation............................................................................5
Video Out...........................................................................6
FCC Information.................................................................7
Troubleshooting..................................................................8
Specifications......................................................................9
Warranty.............................................................................10
Welcome
Congratulations on your purchase of our inspection video camera
with color LCD monitor with video out capabilities. Please read
the user guide carefully before using this product. This product
is designed as a remote inspection device, appropriate for use
in surveying pipes or other hard-to-reach places, equipment or
furnishing installation, car repair, etc.
If you have any question concerning the operation of this Whistler
product please call:
Customer Service
1-800-531-0004
Monday - Friday 8:00AM - 5:00PM CT
or visit:
www.whistlergroup.com
Downloaded from ManualsNet.com search engine
Please keep your purchase receipt in a safe place. You may register
your product online at www.whistlergroup.com. For warranty
verification purposes, a copy of your dated store receipt must
accompany any unit sent in for warranty work. If the unit is returned
without a dated store receipt, an out-of-warranty service charge will
be applied.
Note: Your warranty period begins at the time of purchase. The
warranty is validated only by dated store receipt! Please record the
serial numbers (located on the back on the monitor and bottom of
the handheld unit) in the space provided in the warranty section of
this guide.
Enjoy your Whistler Inspection Camera.
Sincerely,
The Whistler Group, Inc.
Packing List
INTRODUCTION
Magnet
Accessory
Clip
Mirror
Accessory
Clip
Hook
Accessory
Clip
2
9mm Waterproof
Camera Assembly
2.4” LCD
Color Monitor
Downloaded from ManualsNet.com search engine
INSTALLATION
4
Installation
Install Batteries
1. Remove the cover.
2. Insert four (4) new AA batteries into the appropriate slots. Proper
battery orientation is indicated on the battery compartment.
3. Replace battery cover.
Install the Camera with Flexible Tube
When connecting the camera tube to the
handheld unit, make sure that the keyed
ends are properly aligned. Once they are
lined up, finger tighten the knob to hold
the connector in place.
Keyed end plugs
into socket
Install the Accessories
The three (3) included accessories (mirror, hook and magnet) are
all attached to the tube in the same way as illustrated below:
Place hook into hole at end of tube. Place rubber ring around
camera head and hook.
12
Downloaded from ManualsNet.com search engine
Operation
1. Press the power switch to turn the camera on (refer to
Fig-1). The power indicator will illuminate and the LCD will
become viewable.
2. If the image on the LCD is unclear, try adjusting either the
brightness, contrast or mirror controls on the monitor.
LEDs Brightness Control: The 6 levels of LED brightness
can be adjusted by pressing the LEDs Brightness Control
button (refer to Fig-2).
LCD Contrast Control: The 8 levels of LCD contrast may
be adjusted by pressing the LCD Contrast Control button.
3. To rotate the orientation of the image displayed on the
LCD by 90 degrees, press the Mirror button. There are four
(4) possible image orientations that you can toggle through
by pressing this button.
4. When in use, the tube should easily maneuver itself into
position. Do not apply excessive force (refer to Fig-3).
5. The accessories included with the unit can be used to
retrieve small items like dropped rings, screws or grabbing
wires (refer to Fig-4).
OPERATION
5
Fig 2
LEDs
Provide Illumination
Downloaded from ManualsNet.com search engine
Fig 4
OPERATION
6
TIP! The flexible tube can be bent to accommodate exploration in a
variety of locations.
IMPORTANT! Do not immerse the monitor in water. Store in a dry
place. Such measures reduce the risk of electric shock and damage.
Only the lens and tube are water resistant when the unit is fully
assembled.
Video Out
Insert the video cable into the Video Out jack on the side of the unit.
Insert the other end of the video cable to a video in on a TV or other
video monitor system. The unit will provide high quality video to an
external monitor.
Downloaded from ManualsNet.com search engine
FCC INFORMATION
7
CAUTION: Do not expose the monitor or handheld unit
dripping or splashing liquids. Turn off camera and monitor
when not in use. Use only the AC adaptor and cable
supplied with the unit. Properly dispose of the batteries.
Exposure to high temperatures can cause the batteries
to explode. Do not dispose of the batteries in a fire.
When stored, place tape over the terminals to prevent
direct contact with other objects. Some countries have
regulations concerning battery disposal. Please follow all
applicable regulations.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
IMPORTANT: FCC requirements state that changes or modifications
not expressly approved by Whistler could void the user’s authority to
operate the equipment.
FCC ID: TW5GB8863
Downloaded from ManualsNet.com search engine
TROUBLESHOOTING
Troubleshooting
Why won’t the monitor turn on?
• Make sure that the monitor has been charged at least overnight before
first use. Press the reset button on the unit.
Message on monitor says to “See Guide for Troubleshooting“.
• Make sure that the handheld unit is turned on and that the camera tube is
properly attached to the handheld unit.
The power light comes on but nothing shows on the screen?
• This could be due to weak batteries in the handheld. Replace batteries.
• Is the camera tube fully inserted to the handheld unit? When connecting
the camera tube to the handheld unit, make sure the keyed ends are
properly aligned. Once they are lined up, press in firmly and then finger
tighten the knob to hold the connector in place.
Why is my picture upside down?
• Simply press the image orientation button or move the camera tube to
properly orient the image.
What is the maximum depth the waterproof camera can be submerged?
• Approximately 12 feet - the camera extension limit of the unit. Camera
tube has a rating of IP67.
Why does the video look “Scrambled”?
• There are two video formats that the inspection camera can be set to:
NTSC format which is used in North America. The PAL format is used in
Europe and other overseas countries. Enter the menu selection and check
the video format to make sure the monitor is in NTSC format.
What format are the pictures and movies saved as?
• Still images are saved in a .jpg format. Movies are saved in a .avi format,
with video resolution at 640 x 480 pixels.
Video Output, will display live video or will it only display playback of
recorded video?
• When connected to a different monitor the unit will display live video as
well as picture and recorded playback.
8
Downloaded from ManualsNet.com search engine
SPECIFICATIONS
9
Specifications
Imaging Sensor CMOS
Total Pixels 640 x 480 (NTSC)
Horizontal Viewing Angle 36 Degrees
Minimum Illumination 0 Lux
Night Vision Range 0.5m/1.64ft
Power Supply 4 x AA batteries
Tube Diameter 9mm
Waterproof Capacity IP67 (for lens/tube only)
LCD Screen Type 2.36”TFT-LCD
Effective Pixels 480 x 234
Video System NTSC
Consumption Current
(Max.) 150mA
Dimensions (H x W x D) 1.77”H x 9.84”W x
3.46”D
Approx. Weight 385g/15.4 oz
Operating Temperature -10 C~50 C/14 F~122 F
Operating Humidity (Max.) 15~85%RH
All specifications are subject to minor change without prior notice.
Downloaded from ManualsNet.com search engine
Altri manuali per WIC-5000
2
Indice
Altri manuali Whistler Strumento analitico
Whistler
Whistler WIC-2409 Manuale utente
Whistler
Whistler WIC-5000 Manuale utente
Whistler
Whistler WIC4750 Manuale utente
Whistler
Whistler WIC-960S Manuale utente
Whistler
Whistler WIC-2409C Manuale utente
Whistler
Whistler WIC5100 Manuale utente
Whistler
Whistler WIC2750 Manuale utente
Whistler
Whistler WIC-5000 Manuale utente
Whistler
Whistler IC-3409PX Manuale utente
Whistler
Whistler WIC-1750 Manuale utente
