Whistler MAXX Manuale utente
WJS-6000
User Guide
JUMP STARTER
Portable Jump Start & Power Supply
MAXX
2
Welcome
Thank you for choosing a Whistler product. We are
dedicated to providing products that represent both
quality and value. Please read the User Guide carefully
before using this product. If you have additional questions,
please visit the FAQ page on our website at
www.whistlergroup.com
or call Toll Free (800) 531-0004 / Tel (479) 273-6012,
8am to 5pm CT, Monday through Friday
to speak to a Customer Service Representative
PRODUCT LAYOUT
2.1A USB Output
12V DC OUT
HIGH CURRENT
Jump Start Port
LED Power
Indicator Lights
Power
Button 12V DC IN
Charging Port
Flashlight
Packing List
· Jump Starter
· Premium Protection Cables
· 12V DC Car Adapter
· Home AC Adapter
· 4-in-1 USB cable
· Hard Storage Case
· User Guide
Feature Description
3
WARNINGS AND SAFETY GUIDELINES
Please read these safety instructions, operating
instructions, and warnings before charging or using the
jump starter.
Explosion Hazard - USE ONLY IN WELL VENTILATED
AREAS
The jump start cable clamps MUST be connected in correct
polarity ~ RED clamp to the battery Positive (+) and BLACK
clamp to the battery Negative (-) terminals, making sure
they have a good connection. A reverse polarity connection
(positive to negative) can cause damage to the jump starter
and/or create a sparking/explosion hazard.
Fire Hazard - Do not crush, puncture or damage the
jump starter
Never allow the jump start clamps to touch each other
or another common metal conductor. This could cause
damage to the unit and/or create a re hazard. Always
disconnect the jump start cables from the jump starter
after each use and store separately.
Burn Hazard - Keep away from children
Do not insert foreign objects into the jumper cables port/
jack, output ports, or the DC input jack. Do not expose this
product to water, rain, snow, (cont.)
4
condensation, or spray. Do not open the jump starter to
replace the internal battery. There are no user replaceable
parts inside the jump starter.
Additional Warnings
1. Keep the unit clear of re and water.
2. USE ONLY THE WHISTLER PREMIUM PROTECTION
CABLES. Use of other cables may result in damage to
the jump starter, re, personal injury and damage to
vehicle or property.
3. If at any time you witness the jump starter
starting to swell, smoke, or become hot to the
touch, DISCONNECT THE JUMP STARTER AND
DISCONTINUE USE IMMEDIATELY. Move the
jump starter to a safe place away from combustible
materials and safely observe it for approximately 15
minutes as a battery can still ignite after 10 minutes.
WARNINGS AND SAFETY GUIDELINES
5
CAUTION-PLEASE READ
Cautions
1. This jump starter is intended for use on a discharged,
but otherwise capable battery. It will not work on a
battery that has developed a shorted cell or become
damaged. If your vehicle cannot be jump started,
have the battery tested and/or replaced.
2. Before attempting to start 12V vehicle, please make
sure at least 3 LED lights are illuminated on the jump
starter when pressing the power button.
3. Always use the jump starter in a well ventilate area
and keep the jump starter away from children, re,
water, explosive gasses, and combustible materials.
4. DO NOT CRANK IGNITION FOR MORE THAN 5
SECONDS. Cranking for more than 5 seconds may
cause damage to the unit. If vehicle does not start,
wait for solid green LED on Protection Cables before
trying again. The jump-start feature is designed for
short term operation only.
5. If the jump starter becomes warm to the touch during
use, disconnect the jump starter from the cables and
allow to cool before reattempting to start the vehicle.
6
6. When charging the jump starter, please place on
a hard surface and keep away from combustible
materials. Please don’t leave unattended while
charging.
If you have questions concerning the operation of your
Whistler product, or require service during or after the
warranty period, please call
Customer Service at
Toll Free (800)531-0004
Tel (479)273-6012
CAUTION-PLEASE READ
7
BATTERY PRECAUTIONS
1. Lithium Polymer batteries are volatile. Failure to
read and follow the use and operating instructions
may result in fire, personal injury and damage to
property if charged or used improperly. Li-Polymer
battery may explode and cause fire if misused or
defective. Please follow our jump starting instructions
exactly which are listed in the User Guide, label on
the jump starter and the information card included.
2. Never allow a metal tool to concurrently touch the
positive and negative cable ends or battery terminals.
3. Be sure someone is close enough to come to your aid
when working with batteries.
4. If you need to remove a vehicle battery, always
remove the negative terminal from the battery first.
Make sure all accessories are off so you don’t cause
an arc.
5. When working with lead-acid vehicle batteries, have
ample water, soap and baking soda on hand in case
of skin contact with battery acid.
6. The jump starter is supplied with an internal
rechargeable Li-Polymer battery.
8
This battery is self-contained and not consumer
replaceable. Battery must be disposed of properly when
it no longer holds a charge. Proper charging practices will
increase the life of the batteries.
For information on battery recycling, go to
www.call2recycle.org/locator, or contact them
toll free at 800-822-8837
(automated system) or
877-273-2925 for www.call2recycle.org
customer service.
BATTERY PRECAUTIONS
9
Charging the Jump Starter
Plug the home adapter into a 100-240V AC outlet of the
proper plug type.
Connect the other end of the home adapter to the 12V DC
IN Charging Port.
-or-
1. Plug the car adapter into the socket of the vehicle
auxiliary power.
2. Connect the other end of the car adapter to the 12V
DC IN Charging Port.
Indicator Lights
Press the power button to check the level of the jump
starter battery. Number of lights ON indicate percentage of
charge available.
(1=20%, 2=40%, 3=60%, 4=80%, 5=100%)
CHARGING
12V DC Car
Adapter
Home AC
Adapter
10
5 Bars = Fully charged ( 2 Red/1 Yellow/2 Green)
* Note when fully charged all lights do not turn
green
4 Bars = The Unit battery capacity remains good
for most intended uses.
3 Bars = The Unit battery capacity remaining may
not provide the necessary power for jump starting
a vehicle (refer to User Guide).
1 to 2 Bars = The Unit does not contain sucient
power to provide a jump start and should be
fully recharged before attempting to do so. The
remaining battery capacity is very low and has
limited capacity for charging a portable device
and the Unit should be fully recharged.
LED'S FUNCTIONS
LED Power
Indicator Lights
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Whistler Avviamento remoto
