White’s Electronics CoinMaster Manuale utente

Warranty

If within two years (24 months) from the original date of purchase, your White’s detector fails

due to defects in either material or workmanship, White’s will repair or replace at its option,

all necessary parts without charge for parts or labor.

Simply return the complete detector to the Dealer where you purchased it, or to your near-

est Authorized Service Center. The unit must be accompanied by a detailed explanation of

the symptoms of the failure. You must provide proof of date-of-purchase before the unit is

serviced. (http://whiteselectronics.com/info/service,html)

This is a transferable manufacturer warranty, which covers the instrument two years from the

original purchase date, regardless of the owner.

Items excluded from the warranty are batteries, accessories that are not standard equipment,

shipping/handling costs outside the continental USA, Special Delivery costs (Air Freight,

Next Day, 2nd Day, Packaging Services, etc.) and all shipping/handling costs inside the

continental USA 90 days after purchase.

White’s registers your purchase only if the Sales Registration Card is ﬁlled out and re-

turned to the factory address by your dealer soon after original purchase. The purpose of

recording this information is to keep you up-to-date regarding White’s ongoing research &

development.

The warranty does not cover damage caused by accident, misuse, neglect, alterations,

modiﬁcations, unauthorized service, or prolonged exposure to corrosive compounds, includ-

ing salt.

Duration of any implied warranty (e.g., merchantability and ﬁtness for a particular purpose)

shall not be longer than the stated warranty. Neither the manufacturer or the retailer shall be

liable for any incidental or consequential damages. Some states however, do not allow the

limitation on the length of implied warranties, or the exclusion of incidental or consequential

damages. Therefore, the above limitations may not apply to you.

In addition, the stated warranty gives you speciﬁc legal rights, and you may have other rights

which vary from state to state.

The foregoing is the only warranty provided by White’s as the manufacturer of your metal

detector. Any “extended warranty” period beyond two years, which may be provided by a

Dealer or other third party on your detector, may be without White’s authority, involvement

and consent, and might not be honored by White’s Electronics, Inc.

White’s Electronics, Inc.

1011 Pleasant Valley Road

Sweet Home, Oregon 97386

P/N 621-0519 Printed in USA 9/09

CoinMaster™

assembly

1) Remove all parts from shipping carton (see cover).

2) Use nonmetallic washers (between round search coil and clevis fiber

rod) and fiber bolt and thumbnut to secure search coil to fiber rod.

3) Insert fiber rod into curved rod, line up buttons into one of adjust-

ment holes.

4) Unravel search coil cable and wind around rods (first revolution over

top of rod). Plug search coil cable into control box, screw “finger-tight”

to secure.

5) Grip by handle, with arm in elbow cup and sweep search coil over

floor. If necessary, for comfort, compress buttons and reposition fiber

rod. If necessary, Elbow Cup is also adjustable for comfort.

1) Open battery door by pressing elongated button on back of display

and flipping open door. Install two nine volt alkaline batteries (only fit

one way). Close door.

2) Press ON/OFF button. Sweep search coil over ground evenly (near

to or touching ground surface) keeping close to the ground throughout

each sweep and overlapping each pass as if mopping a floor.

3) Solid repeatable beeps and repeatable display signifies a “hit”.

Press P/P button and “X” areas to pinpoint exactly where to dig. Press

P/P again to continue searching.

4) Broken or inconsistent beeps and display indicates undesirable

metals.

searching

•Typical MeTal

TargeT caTegories

•currenT

MeTal indicaTion

•disc/rejecTion

•p/p (pinpoinT)

all MeTal Mode

•currenT MeTal’sdepTh

•low BaTTery indicaTion

•currenT sensiTiviTy

seTTing

1) ON/OFF turns the Power ON and OFF. Low Battery indication is au-

tomatically shown on the display. Remove batteries for storage beyond

two weeks.

2) SENS (sensitivity) adjust the responsiveness to metals, ground, and

external electrical interference. Level shown on the display. Use the

highest level that behaves predictably, lower levels for areas unstable

(falsely signals without the presence of metal).

3) P/P activates pinpoint mode for better item location. Press a second

time prior to continued searching.

4) DISC (discrimination) selects the acceptance or rejection (regarding

audio beep) of each category on the display from IRON to C1 (zinc cent).

For more jewelry, except for iron, accept as much as you can endure.

5) The depth of coin-sized metal is automatically indicated on the lower

left-hand portion of the display.

controls

Display inDications

For more information on

White’s Detectors -

www.whiteselectronics.com

Altri manuali White’s Electronics Rilevatore di metalli

White’s Electronics

White’s Electronics Quantum II Manuale utente

White’s Electronics

White’s Electronics Prizm 6T Manuale utente

White’s Electronics

White’s Electronics GOLDMASTER 24k Guida all'installazione

White’s Electronics

White’s Electronics Bullseye TRX Manuale utente

White’s Electronics

White’s Electronics Treasuremaster 80TR Specifiche

White’s Electronics

White’s Electronics 3900/D PRO PLUS Manuale utente

White’s Electronics

White’s Electronics Coinmaster V Supreme Specifiche

White’s Electronics

White’s Electronics classic I SL Manuale utente

White’s Electronics

White’s Electronics M-59 Treasure Master Specifiche

White’s Electronics

White’s Electronics Classic III SL Manuale utente

White’s Electronics

White’s Electronics Spectra V3 Manuale utente

White’s Electronics

White’s Electronics Surf Master Specifiche

White’s Electronics

White’s Electronics Searchmaster Manuale utente

White’s Electronics

White’s Electronics Coinmaster classic Manuale utente

White’s Electronics

White’s Electronics AF101 Manuale utente

White’s Electronics

White’s Electronics Coinmaster 2/DB Specifiche

White’s Electronics

White’s Electronics 6000/DI PRO SL Manuale utente

White’s Electronics

White’s Electronics Coin Master PRO Manuale utente

White’s Electronics

White’s Electronics coinmaster 3900/D Professional Manuale utente

White’s Electronics

White’s Electronics PulseScan TDI Manuale utente

White’s Electronics

White’s Electronics Beachcomber Manuale utente

White’s Electronics

White’s Electronics PCL 500 Manuale utente

White’s Electronics

White’s Electronics Vision Manuale utente

White’s Electronics

White’s Electronics Classic III Plus Manuale utente

Manuali Rilevatore di metalli popolari di altre marche

Garrett

Garrett MAGNASCANNER CS 5000 Manuale utente

Valex

Valex 1800200 Manuale utente

Gauss

Gauss MIL MD Manuale utente

Velleman

Velleman CS130 Manuale utente

Sears

Sears 321.596370 Manuale utente

Eriez

Eriez X8 Manuale utente

Steinberg Systems

Steinberg Systems SBS-MD-22 Manuale utente

Zircon

Zircon MetalliScanner m60c Manuale utente

nalanda

nalanda MD027 Manuale utente

REV Ritter

REV Ritter CB-7005 Manuale utente

Minelab

Minelab F1A4 Manuale utente

Fisher Research Labs

Fisher Research Labs F70 Manuale utente

Steinberg Systems

Steinberg Systems SBS-MD-12 Manuale utente

GOLDEN MASK

GOLDEN MASK 5 Manuale utente

Grizzly

Grizzly YM 203 Manuale utente

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Manuale utente

Treasure Cove

Treasure Cove Vibra-Probe 560 Manuale utente

Accurate Locators

Accurate Locators XL16 IMAGER Manuale utente