CAUTIO
Whilst fitting these mudguards:
• Confirm they are large enough for the tyres fitted to your bicy-
cle. 38mm” mudguards are suitable for Whyte Cambridge,
Cambridge Varsity, Carnaby, Charing Cross, Cornwall, Devon,
Dorset, Kings Cross, Pimlico, Portobello, Shoreditch, Somerset,
Stirling, Suffolk, Sussex, Victoria & Whitechapel models (Rigid
forks). 46mm” mudguards are suitable for Whyte Caledonian,
Chiltern, Coniston, Malvern & Ridgeway models (Suspension
Forks) and Fairfield (Rigid forks). The Montpellier & Stowe
models have no suitable mounting points for mudguards.
• Check that there will be at least 6mm clearance around the
tyre when they are fitted correctly.
• It is recommended to apply Loctite 243 Thread-Locker or simi-
lar thread adhesive to the threads of all screws that hold the
stays to either the fork or frame. This will help to ensure they
will not come loose. Carefully follow Loctite’s own assembly
instructions.
• SAFETY CHECK – CO FIRM THE CORRECT OPERATIO OF
THE BRAKES A D GEARS AFTER FITTI G THE MUD-
GUARDS. If in doubt either consult the manufacturer’s user
instructions or contact your Whyte Bikes dealer.
Before each and every ride:
• Check that all the fasteners holding the mudguards in place are
still tight.
• If necessary, clean and dirt or road debris from the inside of
the mudguard, since this will reduce the clearance to the tyre.
