DEC 2000 Rev 02
iii
Enabling IP Packet Filtering 45
Enabling IP Address Filtering 45
Setting IP Address Filter Range 46
Setting the IP Filter Base Address 46
RF Station Configuration ............................................................................................................... 47
Viewing Current RF Station Configuration 47
Setting the Operating Mode 49
General Equipment Setup for Performing RF Tests 50
Setting Test Mode Timer Minutes 51
Performing Link Monitor Test (Normal Mode) 52
Performing Transmit and Receive Tests 55
Performing the RSSI Test 57
Setting the RF Transmit Status 58
Setting the Link Monitor Period 59
Setting Maximum Remote Distance (Base Station Only) 60
Setting Link Monitor Remote Station Rank 61
Adjusting Throttling (Remote Station Only) 62
Radio Module Configuration ......................................................................................................... 63
Viewing the Radio Module Configuration 63
Setting Config Test Minutes 65
Setting the Station Type 66
Setting the Station Rank 67
Setting the Center Frequency 68
Setting Security Passwords 69
Setting the Scrambling Code 70
Setting the Acquisition Code 71
Setting a Base to Repeater Mode (Base Station Only) 72
Setting System Symmetry Type (Base Station Only) 74
Setting Dynamic Polling Level (Base Station Only) 75
Setting Remote Unit RF Group 76
Rebooting and Saving RF Module Configurations 79
RF/Ethernet Statistics ...................................................................................................................... 81
Viewing RF/Ethernet Statistics 81
System Security ................................................................................................................................ 84
Viewing System Security 84
Assigning Community Names 86
Setting Menu Passwords 87
Allowing Remote Access and Configuration 89
Setting the Auto Logout Minutes 90
System Commands .......................................................................................................................... 91
Viewing System Command Menu 91
Setting Default System Image 92
Setting the Reboot System Image 93
Rebooting the Current Image 93
Restoring Factory Configurations 94
Resetting Radio and Ethernet Statistics 95
Link Monitor Display ...................................................................................................................... 96
Viewing Link Monitor Statistics 96
Logout ................................................................................................................................................ 97
