Wicrypt Spider Manuale utente
Spider Instruction Manual
Quick Start Guide
For more information visit . icrypt.com
Page 1
efore starting, check that all the following items have been included with your
Device. If anything is missing, contact your dealer
Items Check List
Device 12V Charger
Cat6 Ethernet Cable
SIM Slot Cover
4 Antennas
Modem Slot Cover
Nomenclature
Page 4
Power Port
thernet Port
LAN Ports
Device Reset
SIM Port
Power Indicator
Network Indicator
USB Port
Wifi Indicator
LAN Indicators
Contents
Introduction 2
Items Check List 2
Nomenclature 3
Contents 4
Quick Start Guide 5
Setting up the Device 5
Connection via Wi-Fi 6
Connection via Ethernet Cable 7
Device Dashboard Setup 8
How to Connect to your Wicrypt Device 8
How to Register a Device 9
How to Setup Device Password 10
How to Change Device SSID Name 11
How to Switch from Personal to Business Mode 12
How to Switch from Buisness to Personal Mode 13
How to Setup/Change your Device name (SSID) to your Business Name 15
Page 5
Quick Start Guide
Setting up the Device
Kindly connect the device to an electrical power
outlet.
2 Insert your sim card or connect to the internet
via your ethernet cable.
3
Turn ON the Device.
4Wait for 6 minutes for the Wicrypt firmware to
finish initialization.
Confirm that the following LEDs are On, power ,
wifi and internet.
Page 6
Quick Start Guide
Connection via Wi-Fi
Ensure that the Wi-Fi light is on and
blinking. It can take up to 6 minutes for
the devices to be ready
2
Connect your phone or PC via WiFi to
the device via SSID.
3
Authenticate your device via the Wicrypt
captive portal. (this step is only required if
Wicrypt business is enabled).
Note: You can access the captive portal using the URL wicryptlogin.ne
or 192.168.4.4 if the captive portal is not displayed automatically.
Page 7
Quick Start Guide
Co ectio via Ether et Cable
1
Ensure that the Wi-Fi light is on and
blinking. It can take up to 6 minutes for
the device to be ready.
2
Connect an ethernet cord from the PC to
any of the LAN ports
3
Authenticate your device via the wicrypt
captive portal. (this step is only required if
wicrypt business is enabled).
Note: You can access the captive portal using the URL wicryptlogin.ne
or 192.168.4.4 if the captive portal is not displayed automatically.
Page 8
Device Dashboard Setup
How to connect to your W crypt Dev ce
1Insert a SIM card or connect your Wicrypt device
via the Ethernet cable to the internet
2Make sure you are connected to the device
network (the SSID usually ends with .wc) via WiFi
or Ethernet cable
3Open your browser and type in the IP 192.168.4.4
or the URL wicryptlogin.net
1Ensure that the Wi-Fi light is on and blinking. it
can take up to 6 minutes for the devices to be
ready
4Input “admin” as the device password to login to
the portal
5
Click ‘Login’
Page 9
Device Dashboard Setup
How to Re ister a Device
1Insert a SIM card or connect your Wicrypt device
via the Ethernet cable to the internet
2 Connect your phone or PC via WiFi to
the device via SSID.
3Open your browser and type in the IP 192.168.4.4
or the URL wicryptlogin.net
1Ensure that the Wi-Fi light is on and blinking. it
can take up to 6 minutes for the devices to be
ready
4
Click on ‘Register Device’
5Enter you email and password associated with
the device
Page 10
Device Dashboard Setup
How to etup Device Password
1Open your browser and type in the IP 192.168.4.4
or the URL wicryptlogin.net
6
Click ‘Register’
2Input “admin” as your default password to login
to the portal
3
On the device portal, Click ‘Quick Setup’
4
Under ‘Device Password’, input desired password
Altri manuali per Spider
2
Altri manuali Wicrypt Modem
