4. Point the iSavi as described by the flashing green Pointing LEDs.
(tip up and down and pan left or right). Once all four Pointing LEDs
are solid green press the Pointing Button. The ISavi is now
connected to the Isathub network (but not yet connected to the
internet, and not using you data allotment).
5. At this point any smart device connected to the iSavi Wi-Fi can
make voice calls using the Isathub Voice app.
Connecting to the Internet w/ Smart Device
1. Connect your device to the iSavi Wi-Fi hotspot using the standard
Wi-Fi connection process. The Wi-Fi password can be found on the
back of the iSavi terminal and at the top of this instruction sheet.
2. Once connected to the iSavi Wi-Fi, use the control app to register
and/or make and break data connections.
3. You will use the following credentials from the Isathub control app
login to the iSavi (this is not the Wi-Fi Password):
Username: admin
Password:1234
4. Once the terminal is registered, you can you the voice app to make
and receive voice calls.
5. Once the data connection is completed, all connected devices can
use the internet via the satellite connection.
6. Be sure to disconnect data when an internet connection is not
required. Also, if using a PC, be sure to deactivate any automatic
software updates on your PC.
